component
SGM4917AYTQ16G
Public Made by Adomby adom
SGMICRO Audio Amplifiers, TQFN-16-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSGM4917AYTQ16G
SGMICRO · Audio Amplifiers · TQFN-16-EP(3x3)
SGM4917AYTQ16G from SGMICRO, in a TQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PVDD | power_in | Charge-pump power supply that powers the charge-pump inverter, charge-pump logic and oscillator; connect to a 2.7V to 5.5V positive supply and bypass with 1µF to PGND as close to the pin as possible. |
| 2 | C1P | passive | Flying capacitor positive terminal of the charge pump. |
| 3 | PGND | power_in | Power ground for the charge pump; connect to ground. |
| 4 | C1N | passive | Flying capacitor negative terminal of the charge pump. |
| 5 | PVSS | power_out | Charge-pump output that must be connected to SVSS. |
| 6 | SGND | power_in | Signal ground; connect to ground. |
| 7 | INR+ | input | Noninverting right-channel audio input. |
| 8 | INR- | input | Inverting right-channel audio input. |
| 9 | SVDD | power_in | Amplifier positive power supply; connect to a 2.7V to 5.5V positive supply and bypass with 1µF to SGND as close to the pin as possible. |
| 10 | OUTR | output | Right-channel headphone output. |
| 11 | SVSS | power_in | Amplifier negative power supply; connect to PVSS. |
| 12 | OUTL | output | Left-channel headphone output. |
| 13 | SVDD | power_in | Amplifier positive power supply; connect to a 2.7V to 5.5V positive supply (same net as pin 9). |
| 14 | INL- | input | Inverting left-channel audio input. |
| 15 | INL+ | input | Noninverting left-channel audio input. |
| 16 | SHDN | input | Active-low shutdown input. |
| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SGMICRO |
| Package | TQFN-16-EP(3x3) |
| Category | Amplifiers/Comparators |
| Pins | 17 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage Range | VDD | 2.7 | 5.5 | V | 4 | ||
| Quiescent Supply Current | IDD | 2.7 | 3.7 | mA | 4 | ||
| Shutdown Supply Current | ISHDN | 0.01 | 8 | µA | SHDN = SGND = PGND | 4 | |
| SHDN Input Logic High | VIH | 1.2 | V | 4 | |||
| SHDN Input Logic Low | VIL | 0.4 | V | 4 | |||
| SHDN to Full Operation Time | tSON | 3.2 | ms | 4 | |||
| Output Offset Voltage | VOS | -5.5 | 1.1 | 5.5 | mV | Between IN+ and IN-, input AC-coupled to ground (SGM4917A) | 4 |
| Charge-Pump Oscillator Frequency | fOSC | 200 | 350 | 500 | kHz | 4 | |
| Operating Temperature Range | TA | -40 | 85 | ℃ | 2 | ||
| Supply Voltage (PVDD to SVDD, PVSS to SVSS, PGND to SGND ±0.3 V limits) | PVSS to SVSS | -0.3 | 0.3 | V | PVSS to SVSS | 2 | |
| PGND to SGND | PGND to SGND | -0.3 | 0.3 | V | 2 | ||
| PVDD to SVDD | PVDD to SVDD | -0.3 | 0.3 | V | 2 | ||
| PVDD and SVDD to PGND or SGND | PVDD, SVDD | -0.3 | 6 | V | to PGND or SGND | 2 | |
| PVSS and SVSS to PGND or SGND | PVSS, SVSS | -6 | 0.3 | V | to PGND or SGND | 2 | |
| Junction Temperature | TJ | 150 | ℃ | 2 | |||
| Storage Temperature Range | TSTG | -65 | 150 | ℃ | 2 | ||
| Lead Temperature (Soldering) | TLEAD | 260 | ℃ | Soldering, 10s | 2 | ||
| ESD Susceptibility HBM | ESD HBM | 2000 | V | HBM | 2 | ||
| ESD Susceptibility HBM (output pins to supply and ground pins) | ESD HBM | 4000 | V | HBM, output pins to supply and ground pins | 2 | ||
| ESD Susceptibility MM | ESD MM | 150 | V | MM | 2 | ||
| Output Power | POUT | 80 | mW | RL = 32Ω, THD+N = 0.1% | 4 | ||
| Output Impedance in Shutdown | 2 | kΩ | 4 | ||||
| Total Harmonic Distortion Plus Noise | THD+N | 0.02 | % | RL = 32Ω, POUT = 55mW, f = 1kHz | 4 | ||
| Signal-to-Noise Ratio | SNR | 100 | dB | RL = 32Ω, POUT = 20mW, BW < 20kHz | 4 | ||
| Capacitive Drive | CL | 200 | pF | No sustained oscillation | 4 | ||
| Crosstalk | 90 | dB | RL = 32Ω, VIN = 200mVP-P, f = 10kHz, AV = -1V/V | 4 | |||
| Power Supply Rejection Ratio | PSRR | -78 | dB | f = 217Hz, VRIPPLE = 200mVP-P | 4 | ||
| Power Supply Rejection Ratio | PSRR | -70 | dB | f = 10kHz, VRIPPLE = 200mVP-P | 4 | ||
| Common Mode Rejection Ratio | CMRR | -70 | dB | Input referred, SGM4917A | 4 | ||
| Thermal Shutdown Threshold | 137 | ℃ | 4 | ||||
| Thermal Shutdown Hysteresis | 11 | ℃ | 4 |
CAD (KiCad official)
- Symbol:
SGM4917AYTQ16G - Footprint:
Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm - 3D model: TQFN-16-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
sgm4917aytq16g-etched.step/sgm4917aytq16g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sgm4917aytq16g.step/sgm4917aytq16g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SGMICRO datasheet (13 pp, sha256
a56e58a3991b160f, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).