component
SGM4027-2.5XN3LG
Public Made by Adomby adom
SGMICRO Voltage Reference, SOT-23. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
SGM4027-2.5XN3LG
SGMICRO · Voltage Reference · SOT-23
SGM4027-2.5XN3LG from SGMICRO, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Power supply input, which must be operated between (VREF + 0.2V) and 5.5V, with a 0.47μF low-ESR bypass capacitor recommended at this pin for stability. |
| 2 | OUT | output | Reference voltage output, which requires a 2μF to 22μF capacitor and is rated for a maximum load current of 10mA. |
| 3 | GND | power_in | Ground reference pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SGMICRO |
| Package | SOT-23 |
| Category | Power Management (PMIC) |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Initial Accuracy | -0.1 | 0.1 | % | 4 | |||
| Solder Heat Resistance Shift | -0.03 | 0.03 | % | 4 | |||
| Output Voltage Noise | 8.9 | μVPP/V | f = 0.1Hz to 10Hz | 4 | |||
| Output Voltage Temperature Drift | dVOUT/dT | 10 | 35 | ppm/℃ | -40℃ ≤ TA ≤ +125℃ | 5 | |
| Load Regulation | ΔVO(ΔIL) | 5 | 15 | ppm/mA | -10mA < ILOAD < 10mA | 5 | |
| Dropout Voltage | VIN - VOUT | 5 | 200 | mV | 5 | ||
| Quiescent Current | IQ | 245 | 320 | µA | 5 | ||
| Quiescent Current | IQ | 340 | µA | -40℃ ≤ TA ≤ +125℃ | 5 | ||
| Power Supply Range | VCC | 3 | 5.5 | V | 5 | ||
| Output Voltage Noise | 29.8 | µVRMS | f = 10Hz to 10kHz | 4 | |||
| Output Voltage Noise Density | 273 | nV/√Hz | f = 1kHz | 4 | |||
| Line Regulation | 4 | ppm/V | VREF + 0.5V ≤ VIN ≤ 5.5V | 4 | |||
| Long-Term Stability | 120 | ppm | 0h to 1000h, IOUT = 0mA | 5 | |||
| Long-Term Stability | 20 | ppm | 1000h to 2000h, IOUT = 0mA | 5 | |||
| Thermal Hysteresis | dT | 150 | ppm | 5 | |||
| Short-Circuit Current | ISC | 25 | mA | 5 | |||
| Turn-On Settling Time | 800 | μs | To 0.1% with CLOAD = 2.2μF | 5 | |||
| Input Voltage | VIN | 5.5 | V | IO = 0mA; minimum printed as MAX(VREF + 0.2V, 3.0V) | 2 | ||
| Load Current | ILOAD | 10 | mA | 2 | |||
| Operating Temperature Range | -40 | 125 | ℃ | 2 | |||
| Stable Output Load Capacitance | CLOAD | 2 | 22 | μF | Stable output CLOAD range | 1 | |
| Junction Temperature | 150 | ℃ | 2 | ||||
| Storage Temperature Range | -65 | 150 | ℃ | 2 | |||
| Lead Temperature (Soldering) | 260 | ℃ | 10s | 2 | |||
| Package Thermal Resistance SOT-23 | θJA | 254 | ℃/W | SOT-23 | 2 |
CAD (KiCad official)
- Symbol:
SGM4027-2.5XN3LG - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23 (KiCad packages3D, STEP)
- 3D model files:
sgm4027-2-5xn3lg-etched.step/sgm4027-2-5xn3lg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sgm4027-2-5xn3lg.step/sgm4027-2-5xn3lg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SGMICRO datasheet (17 pp, sha256
1c79af7b8fce4ac2, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SGM4027-2.5XN3LG
**SGMICRO** · Voltage Reference · SOT-23
SGM4027-2.5XN3LG from SGMICRO, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Power supply input, which must be operated between (VREF + 0.2V) and 5.5V, with a 0.47μF low-ESR bypass capacitor recommended at this pin for stability. |
| 2 | OUT | output | Reference voltage output, which requires a 2μF to 22μF capacitor and is rated for a maximum load current of 10mA. |
| 3 | GND | power_in | Ground reference pin. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SGMICRO |
| Package | SOT-23 |
| Category | Power Management (PMIC) |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Initial Accuracy | | -0.1 | | 0.1 | % | | 4 |
| Solder Heat Resistance Shift | | -0.03 | | 0.03 | % | | 4 |
| Output Voltage Noise | | | | 8.9 | μVPP/V | f = 0.1Hz to 10Hz | 4 |
| Output Voltage Temperature Drift | dVOUT/dT | | 10 | 35 | ppm/℃ | -40℃ ≤ TA ≤ +125℃ | 5 |
| Load Regulation | ΔVO(ΔIL) | | 5 | 15 | ppm/mA | -10mA < ILOAD < 10mA | 5 |
| Dropout Voltage | VIN - VOUT | | 5 | 200 | mV | | 5 |
| Quiescent Current | IQ | | 245 | 320 | µA | | 5 |
| Quiescent Current | IQ | | | 340 | µA | -40℃ ≤ TA ≤ +125℃ | 5 |
| Power Supply Range | VCC | 3 | | 5.5 | V | | 5 |
| Output Voltage Noise | | | 29.8 | | µVRMS | f = 10Hz to 10kHz | 4 |
| Output Voltage Noise Density | | | 273 | | nV/√Hz | f = 1kHz | 4 |
| Line Regulation | | | 4 | | ppm/V | VREF + 0.5V ≤ VIN ≤ 5.5V | 4 |
| Long-Term Stability | | | 120 | | ppm | 0h to 1000h, IOUT = 0mA | 5 |
| Long-Term Stability | | | 20 | | ppm | 1000h to 2000h, IOUT = 0mA | 5 |
| Thermal Hysteresis | dT | | 150 | | ppm | | 5 |
| Short-Circuit Current | ISC | | 25 | | mA | | 5 |
| Turn-On Settling Time | | | 800 | | μs | To 0.1% with CLOAD = 2.2μF | 5 |
| Input Voltage | VIN | | | 5.5 | V | IO = 0mA; minimum printed as MAX(VREF + 0.2V, 3.0V) | 2 |
| Load Current | ILOAD | | | 10 | mA | | 2 |
| Operating Temperature Range | | -40 | | 125 | ℃ | | 2 |
| Stable Output Load Capacitance | CLOAD | 2 | | 22 | μF | Stable output CLOAD range | 1 |
| Junction Temperature | | | | 150 | ℃ | | 2 |
| Storage Temperature Range | | -65 | | 150 | ℃ | | 2 |
| Lead Temperature (Soldering) | | | | 260 | ℃ | 10s | 2 |
| Package Thermal Resistance SOT-23 | θJA | | 254 | | ℃/W | SOT-23 | 2 |
## CAD (KiCad official)
- Symbol: `SGM4027-2.5XN3LG`
- Footprint: `Package_TO_SOT_SMD:SOT-23`
- 3D model: SOT-23 (KiCad packages3D, STEP)
- 3D model files: `sgm4027-2-5xn3lg-etched.step` / `sgm4027-2-5xn3lg-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sgm4027-2-5xn3lg.step` / `sgm4027-2-5xn3lg.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [SGMICRO datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589836627674488832) (17 pp, sha256 `1c79af7b8fce4ac2`, retrieved 2026-10-18, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sgm4027-2-5xn3lg-datasheet.pdf)