Generated by kicad-footprint-generator · KiCad file format 20260206
SGM2036S-3.3XN5G
SGMICRO · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
SGM2036S-3.3XN5G from SGMICRO, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input voltage supply pin, 1.6V to 5.5V operating range (6V absolute maximum). Requires a 1µF or larger ceramic decoupling capacitor to GND placed as close as possible to this pin. |
| 2 | GND | power_in | Device ground reference. |
| 3 | EN | input | Active-high enable input. Drive high (VIH ≥ 1.5V) to turn on the regulator; drive low (VIL ≤ 0.4V) to disable. Must not be left floating - tie to IN with an external pull-up resistor if unused. Absolute max -0.3V to 6V. |
| 4 | BP | passive | Reference-noise bypass pin (fixed-voltage version, applicable to -3.3 variant). An external bypass capacitor CBP (e.g. 0.01µF) placed close to this pin reduces output noise and improves PSRR. Absolute max -0.3V to (VIN + 0.3V). |
| 5 | OUT | power_out | Regulated 3.3V output pin, 300mA guaranteed. Requires a ceramic output capacitor with effective capacitance in the 0.5µF to 10µF range placed as close as possible to this pin for stability and PSU decoupling. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SGMICRO |
| Package | SOT-23-5 |
| Category | PMIC |
| Pins | 5 |
Ordering variants
Same part, different packaging or reel option.
SGM2036-3.3YN5G/TRSGM2036-3.3YC5G/TRSGM2036-3.3YUDH4G/TR
CAD (KiCad official)
- Symbol:
SGM2036S-3.3XN5G - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
sgm2036s-3-3xn5g-etched.step/sgm2036s-3-3xn5g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sgm2036s-3-3xn5g.step/sgm2036s-3-3xn5g.glbare the bare package body.
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
sgm2036s-3-3xn5g.step |
85 KB | You want the bare part, or you mark your own boards. |
sgm2036s-3-3xn5g-etched.step |
3.1 MB | You want the part with SGM2036S-3.3XN5G already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 743 faces against 102 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SGMICRO datasheet (21 pp, sha256
42987f3d5b8b080a, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).