component
SGM2036-2.5YN5G
Public Made by Adomby adom
SGMICRO Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
SGM2036-2.5YN5G
SGMICRO · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
SGM2036-2.5YN5G from SGMICRO, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input voltage supply pin, operating range 1.6V to 5.5V; use a 1μF or larger ceramic capacitor from IN to ground placed as close as possible to the pin. |
| 2 | GND | power_in | Ground pin. |
| 3 | EN | input | Enable pin: drive high (above 1.5V) to turn the regulator on and low (below 0.4V) to turn it off, and pull it high through an external resistor to IN if the pin is not used. |
| 4 | BP | passive | Reference-noise bypass pin (fixed voltage version only); an external CBP capacitor placed very close to the pin reduces output noise and improves PSRR. |
| 5 | OUT | power_out | Regulator output pin; use a ceramic capacitor of 0.5μF to 10μF placed as close as possible to the OUT pin for decoupling. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SGMICRO |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage Range | VIN | 1.6 | 5.5 | V | +25℃ | 6 | |
| Output Voltage Accuracy | -2.5 | 2.5 | % | IOUT = 0.1mA, +25℃ | 6 | ||
| Supply Pin Current | IQ | 20 | 26 | µA | No Load, VEN = VIN, +25℃ | 6 | |
| Dropout Voltage | VDROP | 215 | 280 | mV | IOUT = 300mA, 2.5V ≤ VOUT < 3.0V, +25℃ | 6 | |
| Line Regulation | 0.01 | 0.06 | %/V | VIN = 1.6V or (VOUT + 0.5V) to 5.5V, IOUT = 1mA, 1.8V ≤ VOUT ≤ 3.3V, +25℃ | 6 | ||
| Load Regulation | ΔVOUT | 12 | 40 | mV | IOUT = 0.1mA to 300mA, +25℃ | 6 | |
| EN Input Threshold High | VIH | 1.5 | V | VIN = 1.6V to 5.5V, Full | 6 | ||
| EN Input Threshold Low | VIL | 0.4 | V | Full | 6 | ||
| EN Input Bias Current (high) | IBH | 0.8 | 2 | µA | VEN = 5.5V, Full | 6 | |
| EN Input Bias Current (low) | IBL | 0.01 | 1 | µA | VEN = 0V, Full | 6 | |
| Shutdown Supply Current | ISHDN | 0.01 | 1 | µA | VEN = 0V, Full | 6 | |
| Output Current Limit | ILIMIT | 360 | 560 | mA | +25℃ | 6 | |
| Output Voltage Temperature Coefficient | 30 | ppm/℃ | IOUT = 0.1mA, Full | 6 | |||
| Enable Input Voltage Range | 0 | 5.5 | V | 4 | |||
| Input Effective Capacitance | CIN | 0.1 | μF | MIN | 4 | ||
| Output Effective Capacitance | COUT | 0.5 | 10 | μF | 4 | ||
| Operating Temperature Range | -40 | 85 | ℃ | 4 | |||
| IN to GND Voltage | -0.3 | 6 | V | 4 | |||
| EN to GND Voltage | -0.3 | 6 | V | 4 | |||
| OUT, BP/FB to GND Voltage | -0.3 | V | Maximum printed as (VIN + 0.3V) | 4 | |||
| Junction Temperature | 150 | ℃ | 4 | ||||
| Storage Temperature Range | -65 | 150 | ℃ | 4 | |||
| Lead Temperature (Soldering) | 260 | ℃ | Soldering, 10s | 4 | |||
| Maximum Output Current | 300 | mA | +25℃ | 6 | |||
| Short-Circuit Current | ISHORT | 200 | mA | VOUT = 0V, +25℃ | 6 | ||
| Power Supply Rejection Ratio | PSRR | 80 | dB | CBP = 0µF, IOUT = 30mA, COUT = 1μF, VIN = VOUT + 1V, ΔVRIPPLE = 0.2VP-P, f = 217Hz, +25℃ | 6 | ||
| Power Supply Rejection Ratio | PSRR | 75 | dB | CBP = 0µF, IOUT = 30mA, COUT = 1μF, VIN = VOUT + 1V, ΔVRIPPLE = 0.2VP-P, f = 1kHz, +25℃ | 6 | ||
| Power Supply Rejection Ratio | PSRR | 82 | dB | CBP = 0.01μF, IOUT = 30mA, COUT = 1μF, VIN = VOUT + 1V, ΔVRIPPLE = 0.2VP-P, f = 217Hz, +25℃ | 6 | ||
| Power Supply Rejection Ratio | PSRR | 70 | dB | CBP = 0.01μF, IOUT = 30mA, COUT = 1μF, VIN = VOUT + 1V, ΔVRIPPLE = 0.2VP-P, f = 1kHz, +25℃ | 6 | ||
| Output Voltage Noise | en | 100 | µVRMS | CBP = 0µF, f = 10Hz to 100kHz, COUT = 1µF, VOUT = 1.8V, IOUT = 0mA, +25℃ | 6 | ||
| Output Voltage Noise | en | 200 | µVRMS | CBP = 0µF, f = 10Hz to 100kHz, COUT = 1µF, VOUT = 1.8V, IOUT = 30mA, +25℃ | 6 | ||
| Output Voltage Noise | en | 30 | µVRMS | CBP = 0.01µF, f = 10Hz to 100kHz, COUT = 1µF, VOUT = 1.8V, IOUT = 0mA, +25℃ | 6 | ||
| Output Voltage Noise | en | 75 | µVRMS | CBP = 0.01µF, f = 10Hz to 100kHz, COUT = 1µF, VOUT = 1.8V, IOUT = 30mA, +25℃ | 6 | ||
| Output Discharge Resistance | RDIS | 50 | Ω | VIN = 4.0V, VEN = 0V, +25℃ | 6 | ||
| Start-Up Time | tSTR | 30 | µs | COUT = 1μF, No Load, +25℃ | 6 | ||
| Thermal Shutdown Temperature | TSHDN | 140 | ℃ | 7 | |||
| Thermal Shutdown Hysteresis | ΔTSHDN | 15 | ℃ | 7 | |||
| Package Thermal Resistance (SOT-23-5) | θJA | 285 | ℃/W | SOT-23-5 | 4 |
CAD (KiCad official)
- Symbol:
SGM2036-2.5YN5G - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
sgm2036-2-5yn5g-etched.step/sgm2036-2-5yn5g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sgm2036-2-5yn5g.step/sgm2036-2-5yn5g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SGMICRO datasheet (21 pp, sha256
42987f3d5b8b080a, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SGM2036-2.5YN5G
**SGMICRO** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
SGM2036-2.5YN5G from SGMICRO, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input voltage supply pin, operating range 1.6V to 5.5V; use a 1μF or larger ceramic capacitor from IN to ground placed as close as possible to the pin. |
| 2 | GND | power_in | Ground pin. |
| 3 | EN | input | Enable pin: drive high (above 1.5V) to turn the regulator on and low (below 0.4V) to turn it off, and pull it high through an external resistor to IN if the pin is not used. |
| 4 | BP | passive | Reference-noise bypass pin (fixed voltage version only); an external CBP capacitor placed very close to the pin reduces output noise and improves PSRR. |
| 5 | OUT | power_out | Regulator output pin; use a ceramic capacitor of 0.5μF to 10μF placed as close as possible to the OUT pin for decoupling. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SGMICRO |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage Range | VIN | 1.6 | | 5.5 | V | +25℃ | 6 |
| Output Voltage Accuracy | | -2.5 | | 2.5 | % | IOUT = 0.1mA, +25℃ | 6 |
| Supply Pin Current | IQ | | 20 | 26 | µA | No Load, VEN = VIN, +25℃ | 6 |
| Dropout Voltage | VDROP | | 215 | 280 | mV | IOUT = 300mA, 2.5V ≤ VOUT < 3.0V, +25℃ | 6 |
| Line Regulation | | | 0.01 | 0.06 | %/V | VIN = 1.6V or (VOUT + 0.5V) to 5.5V, IOUT = 1mA, 1.8V ≤ VOUT ≤ 3.3V, +25℃ | 6 |
| Load Regulation | ΔVOUT | | 12 | 40 | mV | IOUT = 0.1mA to 300mA, +25℃ | 6 |
| EN Input Threshold High | VIH | 1.5 | | | V | VIN = 1.6V to 5.5V, Full | 6 |
| EN Input Threshold Low | VIL | | | 0.4 | V | Full | 6 |
| EN Input Bias Current (high) | IBH | | 0.8 | 2 | µA | VEN = 5.5V, Full | 6 |
| EN Input Bias Current (low) | IBL | | 0.01 | 1 | µA | VEN = 0V, Full | 6 |
| Shutdown Supply Current | ISHDN | | 0.01 | 1 | µA | VEN = 0V, Full | 6 |
| Output Current Limit | ILIMIT | 360 | 560 | | mA | +25℃ | 6 |
| Output Voltage Temperature Coefficient | | | | 30 | ppm/℃ | IOUT = 0.1mA, Full | 6 |
| Enable Input Voltage Range | | 0 | | 5.5 | V | | 4 |
| Input Effective Capacitance | CIN | 0.1 | | | μF | MIN | 4 |
| Output Effective Capacitance | COUT | 0.5 | | 10 | μF | | 4 |
| Operating Temperature Range | | -40 | | 85 | ℃ | | 4 |
| IN to GND Voltage | | -0.3 | | 6 | V | | 4 |
| EN to GND Voltage | | -0.3 | | 6 | V | | 4 |
| OUT, BP/FB to GND Voltage | | -0.3 | | | V | Maximum printed as (VIN + 0.3V) | 4 |
| Junction Temperature | | | | 150 | ℃ | | 4 |
| Storage Temperature Range | | -65 | | 150 | ℃ | | 4 |
| Lead Temperature (Soldering) | | | | 260 | ℃ | Soldering, 10s | 4 |
| Maximum Output Current | | | 300 | | mA | +25℃ | 6 |
| Short-Circuit Current | ISHORT | | 200 | | mA | VOUT = 0V, +25℃ | 6 |
| Power Supply Rejection Ratio | PSRR | | 80 | | dB | CBP = 0µF, IOUT = 30mA, COUT = 1μF, VIN = VOUT + 1V, ΔVRIPPLE = 0.2VP-P, f = 217Hz, +25℃ | 6 |
| Power Supply Rejection Ratio | PSRR | | 75 | | dB | CBP = 0µF, IOUT = 30mA, COUT = 1μF, VIN = VOUT + 1V, ΔVRIPPLE = 0.2VP-P, f = 1kHz, +25℃ | 6 |
| Power Supply Rejection Ratio | PSRR | | 82 | | dB | CBP = 0.01μF, IOUT = 30mA, COUT = 1μF, VIN = VOUT + 1V, ΔVRIPPLE = 0.2VP-P, f = 217Hz, +25℃ | 6 |
| Power Supply Rejection Ratio | PSRR | | 70 | | dB | CBP = 0.01μF, IOUT = 30mA, COUT = 1μF, VIN = VOUT + 1V, ΔVRIPPLE = 0.2VP-P, f = 1kHz, +25℃ | 6 |
| Output Voltage Noise | en | | 100 | | µVRMS | CBP = 0µF, f = 10Hz to 100kHz, COUT = 1µF, VOUT = 1.8V, IOUT = 0mA, +25℃ | 6 |
| Output Voltage Noise | en | | 200 | | µVRMS | CBP = 0µF, f = 10Hz to 100kHz, COUT = 1µF, VOUT = 1.8V, IOUT = 30mA, +25℃ | 6 |
| Output Voltage Noise | en | | 30 | | µVRMS | CBP = 0.01µF, f = 10Hz to 100kHz, COUT = 1µF, VOUT = 1.8V, IOUT = 0mA, +25℃ | 6 |
| Output Voltage Noise | en | | 75 | | µVRMS | CBP = 0.01µF, f = 10Hz to 100kHz, COUT = 1µF, VOUT = 1.8V, IOUT = 30mA, +25℃ | 6 |
| Output Discharge Resistance | RDIS | | 50 | | Ω | VIN = 4.0V, VEN = 0V, +25℃ | 6 |
| Start-Up Time | tSTR | | 30 | | µs | COUT = 1μF, No Load, +25℃ | 6 |
| Thermal Shutdown Temperature | TSHDN | | 140 | | ℃ | | 7 |
| Thermal Shutdown Hysteresis | ΔTSHDN | | 15 | | ℃ | | 7 |
| Package Thermal Resistance (SOT-23-5) | θJA | | 285 | | ℃/W | SOT-23-5 | 4 |
## CAD (KiCad official)
- Symbol: `SGM2036-2.5YN5G`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `sgm2036-2-5yn5g-etched.step` / `sgm2036-2-5yn5g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sgm2036-2-5yn5g.step` / `sgm2036-2-5yn5g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [SGMICRO datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8552193463489097728) (21 pp, sha256 `42987f3d5b8b080a`, retrieved 2026-10-17, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sgm2036-2-5yn5g-datasheet.pdf)