main
Ray Publish 0.1.1 bcc600f
{
  "schema_version": 1,
  "type": "component",
  "slug": "sg3525a",
  "title": "SG3525A",
  "brief": "IDCHIP AC-DC Controllers and Regulators, SOP-16. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.1",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "pmic",
    "sg3525a"
  ],
  "component": {
    "mpn": "SG3525A",
    "manufacturer": "IDCHIP",
    "package": "SOP-16",
    "pin_count": 16,
    "category": "PMIC",
    "subcategory": "AC-DC Controllers and Regulators",
    "datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2309061026_IDCHIP-SG3525A_C7498829.pdf",
    "parts": {
      "symbol": "sg3525a.kicad_sym",
      "footprint": "sg3525a.kicad_mod",
      "model_3d": "sg3525a-hero.glb",
      "model_3d_plain": "sg3525a.glb",
      "model_3d_step": "sg3525a-etched.step",
      "model_3d_step_plain": "sg3525a.step",
      "lbr": "sg3525a.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "Inv. Input",
        "type": "input",
        "description": "Inverting input of the on-chip error amplifier. Common-mode range 1.5 V to 5.2 V (covers the internal Vref = 5.1 V so no external resistor divider is required for reference-based feedback). Input offset 2 mV typ, input bias 1 µA typ."
      },
      {
        "number": "2",
        "name": "Noninv. Input",
        "type": "input",
        "description": "Non-inverting input of the on-chip error amplifier. Common-mode range 1.5 V to 5.2 V; open-loop gain 75 dB typ, CMRR 75 dB typ, PSRR 60 dB typ."
      },
      {
        "number": "3",
        "name": "Sync",
        "type": "bidirectional",
        "description": "Oscillator sync pin - can be driven by an external clock (~3.5 V, ~1 mA typ, 2.0 V threshold typ) to synchronize the SG3525A to a master clock, or used as a master output to slave additional devices."
      },
      {
        "number": "4",
        "name": "OSC. Output",
        "type": "output",
        "description": "Oscillator clock output (3.0-3.5 V amplitude typ). Provides a buffered version of the internal clock for external monitoring or slaving other devices."
      },
      {
        "number": "5",
        "name": "CT",
        "type": "passive",
        "description": "Oscillator timing capacitor connection. Recommended range 0.001 µF to 0.2 µF. Together with RT and RD sets oscillator frequency (100 Hz to 400 kHz)."
      },
      {
        "number": "6",
        "name": "RT",
        "type": "passive",
        "description": "Oscillator timing resistor connection. Recommended range 2.0 kΩ to 150 kΩ. Sets oscillator charging current (2.0 mA typ at IRT = 2.0 mA)."
      },
      {
        "number": "7",
        "name": "Discharge",
        "type": "passive",
        "description": "Oscillator discharge / dead-time pin. External resistor RD (0 to 500 Ω) between CT (pin 5) and Discharge sets the dead-time (blanking interval) between the two outputs."
      },
      {
        "number": "8",
        "name": "Soft-Start",
        "type": "passive",
        "description": "Soft-start capacitor connection. Internal 50 µA current source charges an external capacitor at power-up to ramp the PWM duty cycle from 0 % to maximum, giving controlled start-up. Soft-start current 25-80 µA (50 µA typ)."
      },
      {
        "number": "9",
        "name": "Compensation",
        "type": "output",
        "description": "Error-amplifier output / PWM comparator input; loop-compensation node. Connect RC network here for feedback loop shaping. PWM comparator thresholds: 0.9 V (zero duty) to 3.3 V (max duty)."
      },
      {
        "number": "10",
        "name": "Shutdown",
        "type": "input",
        "description": "Active-high shutdown input. A high level (>2.0 V) immediately latches both outputs off via the PWM latch and begins discharging the soft-start capacitor (~100 µA). Should not be left floating due to noise-coupling risk. Input current 0.4 mA typ at 2.5 V."
      },
      {
        "number": "11",
        "name": "Output A",
        "type": "output",
        "description": "Totem-pole PWM output A (one of two alternating outputs). ±400 mA peak drive; VOH ≈ 18 V and VOL ≈ 0.2 V at 20 mA (VCC = 20 V). Rise/fall times ~100/50 ns typ into 1 nF. Drives MOSFET gates or bipolar bases directly."
      },
      {
        "number": "12",
        "name": "Ground",
        "type": "power_in",
        "description": "Signal and power ground return for the device."
      },
      {
        "number": "13",
        "name": "VC",
        "type": "power_in",
        "description": "Output-stage collector supply (separate from VCC). Recommended range 4.5 V to 35 V; allows the output-driver rail to be sourced from a different supply than the control-section VCC."
      },
      {
        "number": "14",
        "name": "Output B",
        "type": "output",
        "description": "Totem-pole PWM output B (alternates with Output A each oscillator cycle). ±400 mA peak drive; same VOH/VOL and switching characteristics as Output A."
      },
      {
        "number": "15",
        "name": "VCC",
        "type": "power_in",
        "description": "Main IC supply. Recommended range 8.0 V to 35 V (absolute max 40 V). Under-voltage lockout trips at 6.0-8.0 V (7.0 V typ). Supply current ~14 mA typ at VCC = 35 V."
      },
      {
        "number": "16",
        "name": "Vref",
        "type": "power_out",
        "description": "Internal 5.1 V ± 1 % voltage reference output. Rated 0-20 mA load; short-circuit current 80 mA typ. Bypass with 0.1 µF to ground; may be tied to error-amp input for reference-based feedback."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2309061026_IDCHIP-SG3525A_C7498829.pdf",
        "pages": 7,
        "sha256": "7bf1f64c1c7ad0d3",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "sg3525a.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          9.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "sg3525a-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          9.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "81094f0a35bbf60b79035222d0ca9917383b8a43cd5122d4356b5771c80c7492",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "IDCHIP",
      "Package": "SOP-16",
      "Category": "PMIC",
      "Pins": "16"
    }
  },
  "variants": [
    {
      "mpn": "SG3525ADW",
      "kind": "packaging"
    },
    {
      "mpn": "SG3525AN",
      "kind": "packaging"
    },
    {
      "mpn": "SG3527AN",
      "kind": "unknown"
    }
  ],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "sg3525a"
  ],
  "discovery_pitch": "SG3525A (IDCHIP) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "sg3525a.kicad_sym",
    "sg3525a.kicad_mod",
    "sg3525a.glb",
    "sg3525a.step",
    "sg3525a.lbr",
    "docs/hero.png",
    "docs/sg3525a-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "sg3525a-etched.step",
    "sg3525a-hero.glb",
    "sg3525a-hero.overlay.json"
  ],
  "visibility": "public",
  "updated_at": "2026-09-25T05:44:46.607Z",
  "description": "IDCHIP AC-DC Controllers and Regulators, SOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "org": "adom"
}