main
Ray
Publish 0.1.1
bcc600f
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224
{
"slug": "sg3525a",
"version": "0.1.1",
"type": "component",
"description": "IDCHIP AC-DC Controllers and Regulators, SOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
"tags": [
"component",
"pmic",
"sg3525a"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"sg3525a.kicad_sym",
"sg3525a.kicad_mod",
"sg3525a.glb",
"sg3525a.step",
"sg3525a.lbr",
"docs/hero.png",
"docs/sg3525a-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"sg3525a-etched.step",
"sg3525a-hero.glb",
"sg3525a-hero.overlay.json"
],
"component": {
"mpn": "SG3525A",
"manufacturer": "IDCHIP",
"package": "SOP-16",
"pin_count": 16,
"category": "PMIC",
"subcategory": "AC-DC Controllers and Regulators",
"datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2309061026_IDCHIP-SG3525A_C7498829.pdf",
"parts": {
"symbol": "sg3525a.kicad_sym",
"footprint": "sg3525a.kicad_mod",
"model_3d": "sg3525a-hero.glb",
"model_3d_plain": "sg3525a.glb",
"model_3d_step": "sg3525a-etched.step",
"model_3d_step_plain": "sg3525a.step",
"lbr": "sg3525a.lbr"
},
"distributor_links": {},
"pins": [
{
"number": "1",
"name": "Inv. Input",
"type": "input",
"description": "Inverting input of the on-chip error amplifier. Common-mode range 1.5 V to 5.2 V (covers the internal Vref = 5.1 V so no external resistor divider is required for reference-based feedback). Input offset 2 mV typ, input bias 1 µA typ."
},
{
"number": "2",
"name": "Noninv. Input",
"type": "input",
"description": "Non-inverting input of the on-chip error amplifier. Common-mode range 1.5 V to 5.2 V; open-loop gain 75 dB typ, CMRR 75 dB typ, PSRR 60 dB typ."
},
{
"number": "3",
"name": "Sync",
"type": "bidirectional",
"description": "Oscillator sync pin - can be driven by an external clock (~3.5 V, ~1 mA typ, 2.0 V threshold typ) to synchronize the SG3525A to a master clock, or used as a master output to slave additional devices."
},
{
"number": "4",
"name": "OSC. Output",
"type": "output",
"description": "Oscillator clock output (3.0-3.5 V amplitude typ). Provides a buffered version of the internal clock for external monitoring or slaving other devices."
},
{
"number": "5",
"name": "CT",
"type": "passive",
"description": "Oscillator timing capacitor connection. Recommended range 0.001 µF to 0.2 µF. Together with RT and RD sets oscillator frequency (100 Hz to 400 kHz)."
},
{
"number": "6",
"name": "RT",
"type": "passive",
"description": "Oscillator timing resistor connection. Recommended range 2.0 kΩ to 150 kΩ. Sets oscillator charging current (2.0 mA typ at IRT = 2.0 mA)."
},
{
"number": "7",
"name": "Discharge",
"type": "passive",
"description": "Oscillator discharge / dead-time pin. External resistor RD (0 to 500 Ω) between CT (pin 5) and Discharge sets the dead-time (blanking interval) between the two outputs."
},
{
"number": "8",
"name": "Soft-Start",
"type": "passive",
"description": "Soft-start capacitor connection. Internal 50 µA current source charges an external capacitor at power-up to ramp the PWM duty cycle from 0 % to maximum, giving controlled start-up. Soft-start current 25-80 µA (50 µA typ)."
},
{
"number": "9",
"name": "Compensation",
"type": "output",
"description": "Error-amplifier output / PWM comparator input; loop-compensation node. Connect RC network here for feedback loop shaping. PWM comparator thresholds: 0.9 V (zero duty) to 3.3 V (max duty)."
},
{
"number": "10",
"name": "Shutdown",
"type": "input",
"description": "Active-high shutdown input. A high level (>2.0 V) immediately latches both outputs off via the PWM latch and begins discharging the soft-start capacitor (~100 µA). Should not be left floating due to noise-coupling risk. Input current 0.4 mA typ at 2.5 V."
},
{
"number": "11",
"name": "Output A",
"type": "output",
"description": "Totem-pole PWM output A (one of two alternating outputs). ±400 mA peak drive; VOH ≈ 18 V and VOL ≈ 0.2 V at 20 mA (VCC = 20 V). Rise/fall times ~100/50 ns typ into 1 nF. Drives MOSFET gates or bipolar bases directly."
},
{
"number": "12",
"name": "Ground",
"type": "power_in",
"description": "Signal and power ground return for the device."
},
{
"number": "13",
"name": "VC",
"type": "power_in",
"description": "Output-stage collector supply (separate from VCC). Recommended range 4.5 V to 35 V; allows the output-driver rail to be sourced from a different supply than the control-section VCC."
},
{
"number": "14",
"name": "Output B",
"type": "output",
"description": "Totem-pole PWM output B (alternates with Output A each oscillator cycle). ±400 mA peak drive; same VOH/VOL and switching characteristics as Output A."
},
{
"number": "15",
"name": "VCC",
"type": "power_in",
"description": "Main IC supply. Recommended range 8.0 V to 35 V (absolute max 40 V). Under-voltage lockout trips at 6.0-8.0 V (7.0 V typ). Supply current ~14 mA typ at VCC = 35 V."
},
{
"number": "16",
"name": "Vref",
"type": "power_out",
"description": "Internal 5.1 V ± 1 % voltage reference output. Rated 0-20 mA load; short-circuit current 80 mA typ. Bypass with 0.1 µF to ground; may be tied to error-amp input for reference-based feedback."
}
],
"provenance": {
"extractor": "ds2sf",
"datasheet": {
"url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2309061026_IDCHIP-SG3525A_C7498829.pdf",
"pages": 7,
"sha256": "7bf1f64c1c7ad0d3",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 16,
"described": 16,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "sg3525a.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
9.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "sg3525a-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
9.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "81094f0a35bbf60b79035222d0ca9917383b8a43cd5122d4356b5771c80c7492",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"title": "SG3525A",
"brief": "IDCHIP AC-DC Controllers and Regulators, SOP-16. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
"metadata": {
"specs": {
"Manufacturer": "IDCHIP",
"Package": "SOP-16",
"Category": "PMIC",
"Pins": "16"
}
},
"discovery_triggers": [
"sg3525a"
],
"discovery_pitch": "SG3525A (IDCHIP) component page with datasheet-verified CAD.",
"visibility": "public"
}