main
Ray sg3525-hxy: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 1eb18a6
{
  "schema_version": 1,
  "type": "component",
  "slug": "sg3525-hxy",
  "title": "SG3525-HXY",
  "brief": "HXY MOSFET AC-DC Controllers and Regulators, SOP-16. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "pmic",
    "sg3525-hxy"
  ],
  "component": {
    "mpn": "SG3525-HXY",
    "manufacturer": "HXY MOSFET",
    "package": "SOP-16",
    "pin_count": 16,
    "category": "PMIC",
    "subcategory": "AC-DC Controllers and Regulators",
    "datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2306151053_HXY-MOSFET-SG3525-HXY_C7427360.pdf",
    "parts": {
      "symbol": "sg3525-hxy.kicad_sym",
      "footprint": "sg3525-hxy.kicad_mod",
      "model_3d": "sg3525-hxy-etched.glb",
      "model_3d_plain": "sg3525-hxy.glb",
      "model_3d_step": "sg3525-hxy-etched.step",
      "model_3d_step_plain": "sg3525-hxy.step",
      "lbr": "sg3525-hxy.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "Inv. Input",
        "type": "input",
        "description": "Inverting input of the internal error amplifier. Common-mode range includes the 5.1 V reference so no external divider is required when regulating to VREF."
      },
      {
        "number": "2",
        "name": "Noninv. Input",
        "type": "input",
        "description": "Non-inverting input of the internal error amplifier. Typical input offset 1.5 mV, bias current 1 µA, CMRR 90 dB."
      },
      {
        "number": "3",
        "name": "Sync",
        "type": "bidirectional",
        "description": "Oscillator sync input/output for master/slave operation or synchronization with an external clock. Sync threshold typ 2 V; sync input current typ 1.3 mA at 3.5 V."
      },
      {
        "number": "4",
        "name": "OSC. Output",
        "type": "output",
        "description": "Oscillator clock output. Provides the internal clock signal (typ 3 V amplitude, 0.6 µs width) for external use or scope monitoring."
      },
      {
        "number": "5",
        "name": "CT",
        "type": "passive",
        "description": "Oscillator timing capacitor. Combined with RT (pin 6) sets the switching frequency (100 Hz-500 kHz range). Typical charging current 50 µA."
      },
      {
        "number": "6",
        "name": "RT",
        "type": "passive",
        "description": "Oscillator timing resistor. Sets the oscillator charge current; typical range 2 kΩ (430 kHz) to 200 kΩ (60 Hz-120 Hz) with the corresponding CT."
      },
      {
        "number": "7",
        "name": "Discharge",
        "type": "passive",
        "description": "Deadtime/discharge pin. A resistor between CT (pin 5) and Discharge sets the oscillator discharge time, which controls the deadtime between the A and B outputs."
      },
      {
        "number": "8",
        "name": "Soft-Start",
        "type": "passive",
        "description": "Soft-start capacitor pin. An internal 50 µA current source charges the external capacitor to ramp up the duty cycle at startup. Typical soft-start current 51 µA."
      },
      {
        "number": "9",
        "name": "Compensation",
        "type": "output",
        "description": "Error amplifier output and PWM comparator input. Loop compensation network (typically a resistor and capacitor to Inv. Input) is connected here."
      },
      {
        "number": "10",
        "name": "Shutdown",
        "type": "input",
        "description": "Active-high shutdown input. Threshold typ 0.8 V (min 0.6 V, max 1 V). Asserting shutdown initiates the pulse-by-pulse latch-off, discharges the soft-start capacitor, and disables both outputs."
      },
      {
        "number": "11",
        "name": "Output A",
        "type": "output",
        "description": "Push-pull totem-pole gate driver output A. Sources/sinks >200 mA (500 mA absolute max). Alternates with Output B; typ rise/fall 80 ns / 70 ns into 1 nF."
      },
      {
        "number": "12",
        "name": "Ground",
        "type": "power_in",
        "description": "Signal and power ground return for the device."
      },
      {
        "number": "13",
        "name": "VC",
        "type": "power_in",
        "description": "Collector supply for the output driver stage. Rated 40 V absolute maximum; usually tied to VCC but can be biased separately to drive gates from a different rail."
      },
      {
        "number": "14",
        "name": "Output B",
        "type": "output",
        "description": "Push-pull totem-pole gate driver output B. Complementary phase to Output A for push-pull / half-bridge / full-bridge topologies. Same drive spec as Output A."
      },
      {
        "number": "15",
        "name": "VCC",
        "type": "power_in",
        "description": "Main supply input. Operating range 8-35 V; 40 V absolute maximum. UVLO turns the device on around 7 V typical (6-8 V) with hysteresis. Typical ICC 12 mA."
      },
      {
        "number": "16",
        "name": "Vref",
        "type": "power_out",
        "description": "5.1 V ±1% precision reference output. Short-circuit current typ 80 mA (limit 100 mA); intended for biasing external circuitry, decouple with ~0.1 µF to ground."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2306151053_HXY-MOSFET-SG3525-HXY_C7427360.pdf",
        "pages": 7,
        "sha256": "523bdd7216fb17e2",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "sg3525-hxy.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          9.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "sg3525-hxy-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          9.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "c9e21d7a2c28ca38274dad75c2510382321f56fccd2ea5ea9826c4ab45c30d45",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "HXY MOSFET",
      "Package": "SOP-16",
      "Category": "PMIC",
      "Pins": "16"
    }
  },
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "sg3525-hxy"
  ],
  "discovery_pitch": "SG3525-HXY (HXY MOSFET) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "sg3525-hxy.kicad_sym",
    "sg3525-hxy.kicad_mod",
    "sg3525-hxy.glb",
    "sg3525-hxy.step",
    "sg3525-hxy.lbr",
    "docs/hero.png",
    "docs/sg3525-hxy-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "sg3525-hxy-etched.step"
  ],
  "visibility": {
    "public": true
  },
  "updated_at": "2026-09-25T05:44:38.462Z"
}