← Commit history
page.json+164−8@@ -1,13 +1,174 @@ {+ "schema_version": 1,+ "type": "component", "slug": "sg3524dr",+ "title": "SG3524DR",+ "brief": "UMW DC-DC Converters, SOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "UMW DC-DC Converters, SOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "pmic", "sg3524dr" ],+ "component": {+ "mpn": "SG3524DR",+ "manufacturer": "UMW",+ "package": "SOP-16",+ "pin_count": 16,+ "category": "PMIC",+ "subcategory": "DC-DC Converters",+ "datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2311091746_UMW-Youtai-Semiconductor-Co---Ltd--SG3524DR-UMW_C7503196.pdf",+ "parts": {+ "symbol": "sg3524dr.kicad_sym",+ "footprint": "sg3524dr.kicad_mod",+ "model_3d": "sg3524dr.glb",+ "model_3d_step": "sg3524dr.step",+ "lbr": "sg3524dr.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "INV.INPUT",+ "type": "input",+ "description": "Inverting input of the internal error amplifier. Tied to the feedback network of the switching regulator's output-voltage divider."+ },+ {+ "number": "2",+ "name": "N.I.INPUT",+ "type": "input",+ "description": "Non-inverting input of the internal error amplifier. Normally driven from a reference-derived setpoint (e.g. divider off VREF)."+ },+ {+ "number": "3",+ "name": "OSC.OUTPUT",+ "type": "output",+ "description": "Oscillator sawtooth/sync output. Provides a ~3.5V peak clock/sync waveform (0.3-1.5\u00b5s pulse width) usable for external synchronization or as a blanking/dead-time signal."+ },+ {+ "number": "4",+ "name": "+C.L. SENSE",+ "type": "input",+ "description": "Non-inverting input of the current-limit sense amplifier. Connect across the current-sense resistor with pin 5; limit threshold is ~200mV."+ },+ {+ "number": "5",+ "name": "-C.L. SENSE",+ "type": "input",+ "description": "Inverting input of the current-limit sense amplifier. Paired with pin 4 across the current-sense element to fold back the PWM when overcurrent is detected."+ },+ {+ "number": "6",+ "name": "RT",+ "type": "passive",+ "description": "Timing resistor terminal. External RT from this pin to ground sets the oscillator charging current; recommended range 1.8k\u03a9 to 100k\u03a9."+ },+ {+ "number": "7",+ "name": "CT",+ "type": "passive",+ "description": "Timing capacitor terminal. External CT from this pin to ground sets the oscillator ramp; recommended range 0.001\u00b5F to 0.1\u00b5F. Fosc \u2248 1.30/(RT\u00b7CT)."+ },+ {+ "number": "8",+ "name": "GROUND",+ "type": "power_in",+ "description": "Device signal and power ground return (0V). All internal references, oscillator, comparators and output transistor emitters (when tied here) are referred to this node."+ },+ {+ "number": "9",+ "name": "COMPENSATION",+ "type": "output",+ "description": "Error-amplifier output / PWM comparator input. Loop-compensation network (typically a series R-C to INV.INPUT) is connected here to shape the control-loop response."+ },+ {+ "number": "10",+ "name": "SHUTDOWN",+ "type": "input",+ "description": "Active-high shutdown input. Pulling above the turn-off threshold (typ 0.8V, 0.5-1.2V) inhibits both PWM outputs. Tie low or leave unused for normal operation."+ },+ {+ "number": "11",+ "name": "EA",+ "type": "output",+ "description": "Emitter of output transistor A (uncommitted NPN). Used as the output when the stage is configured as an emitter follower, or grounded when the collector is used as the switching node."+ },+ {+ "number": "12",+ "name": "CA",+ "type": "output",+ "description": "Collector of output transistor A (uncommitted NPN). Rated 40V / 100mA per package, 50mA per output; used for single-ended or push-pull drive to an external switch or transformer."+ },+ {+ "number": "13",+ "name": "CB",+ "type": "output",+ "description": "Collector of output transistor B (uncommitted NPN). Complementary phase to CA; toggles alternately at half the oscillator frequency for push-pull operation."+ },+ {+ "number": "14",+ "name": "EB",+ "type": "output",+ "description": "Emitter of output transistor B (uncommitted NPN). Serves as the emitter-follower output or is grounded when CB is used as the switching node."+ },+ {+ "number": "15",+ "name": "+VIN",+ "type": "power_in",+ "description": "Main supply input. Recommended 8V to 40V; absolute max 40V. Powers the reference, oscillator, error amp and output transistors. Bypass locally to GROUND."+ },+ {+ "number": "16",+ "name": "VREF",+ "type": "power_out",+ "description": "Internally regulated 5V reference output (4.8-5.2V), source capability up to 20mA (short-circuit current 25-150mA). Used to bias external dividers and the error-amp non-inverting input."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2311091746_UMW-Youtai-Semiconductor-Co---Ltd--SG3524DR-UMW_C7503196.pdf",+ "pages": 12,+ "sha256": "366bbb2f3ad77931",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 16,+ "described": 16,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "UMW",+ "Package": "SOP-16",+ "Category": "PMIC",+ "Pins": "16"+ }+ },+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "sg3524dr"+ ],+ "discovery_pitch": "SG3524DR (UMW) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +186,5 @@ "docs/sg3524dr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }