main
Ray Publish 0.1.0 a053bcc

SG-9101CG 25.000Mhz C05PGAAA

Seiko Epson · Pre-programmed Oscillators · SMD2520-4P

SG-9101CG 25.000Mhz C05PGAAA from Seiko Epson, in a SMD2520-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OE input Output enable: High gives the specified frequency at OUT, Low forces OUT low (weak pull down) with only the output driver disabled; VIH is 70 % VCC min and VIL is 30 % VCC max.
2 GND power_in Ground; place a 0.1 μF capacitor between VCC and GND as close to the device as possible.
3 OUT output Clock output (CMOS) with a maximum load of 15 pF, 0.67 MHz to 170 MHz.
4 VCC power_in Power supply, 1.62 V to 3.63 V, with a 0.1 μF capacitor to GND placed close to the pin.

Key specifications

Parameter Value
Manufacturer Seiko Epson
Package SMD2520-4P
Category Crystal Oscillator/Oscillator/Resonator
Pins 4

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 1.62 3.63 V 1.62-1.98, 1.98-2.20, 2.20-2.80, 2.70-3.63 V ranges 1
Output frequency range fo 0.67 170 MHz 1
Nominal output frequency fo 25 MHz MPN 25.000MHz 1
Storage temperature T_stg -40 125 ºC Storage as single product. 1
Operating temperature T_use -40 85 ºC Code G 1
Frequency tolerance f_tol -50 50 ×10-6 Average frequency of 1s gate time. 1
Current consumption, 1.62-1.98 V ICC 3.4 mA No load, fo = 20 MHz, T_use = +105 ºC 1
Current consumption, 1.98-2.20 V ICC 3.5 mA No load, fo = 20 MHz, T_use = +105 ºC 1
Current consumption, 2.20-2.80 V ICC 3.6 mA No load, fo = 20 MHz, T_use = +105 ºC 1
Current consumption, 2.70-3.63 V ICC 3.7 mA No load, fo = 20 MHz, T_use = +105 ºC 1
Symmetry SYM 45 55 % 50 % VCC Level 1
Output voltage high VOH 90 % VCC Default (fo ≤ 40 MHz) IOH: -1.5/-2.0/-2.5/-3.0 mA for 1.62-1.98/1.98-2.20/2.20-2.80/2.70-3.63 V 1
Output voltage low VOL 10 % VCC Default (fo ≤ 40 MHz) IOL: 1.5/2.0/2.5/3.0 mA for 1.62-1.98/1.98-2.20/2.20-2.80/2.70-3.63 V 1
Output load condition L_CMOS 15 pF 1
Input voltage high (OE) VIH 70 % VCC 1
Input voltage low (OE) VIL 30 % VCC 1
Rise/fall time, default tr/tf 6 ns fo ≤ 40 MHz, 20 % - 80 % VCC, L_CMOS = 15 pF 1
Disable time t_stp 1 μs Measured from the time OE or ST pin crosses 30 % VCC 1
Enable time t_sta 1 μs Measured from the time OE pin crosses 70 % VCC 1
Start-up time t_str 3 ms Measured from the time VCC reaches its rated minimum value, 1.62 V 1
ESD HBM 2000 V Human Body Model, breakdown voltage 6
ESD MM 250 V Machine Model, breakdown voltage 6
ESD CDM 750 V Charged Device Model, breakdown voltage 6
Reflow peak temperature 260 °C MSL 1, Peak Temp. (Max) 6

CAD (KiCad official)

  • Symbol: SG-9101CG 25.000Mhz C05PGAAA
  • Footprint: Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm
  • 3D model: SMD2520-4P (KiCad packages3D, STEP)
  • 3D model files: sg-9101cg-25-000mhz-c05pgaaa-etched.step / sg-9101cg-25-000mhz-c05pgaaa-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sg-9101cg-25-000mhz-c05pgaaa.step / sg-9101cg-25-000mhz-c05pgaaa.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Seiko Epson datasheet (8 pp, sha256 6dafa52ee8e20080, retrieved 2026-10-27, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF