3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSG-9101CE 12.000MHz D20PHAAA
Seiko Epson · Oscillators · SMD3225-4P
SG-9101CE 12.000MHz D20PHAAA from Seiko Epson, in a SMD3225-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE | input | Output enable input: High gives the specified frequency output on OUT; Low forces OUT low (weak pull-down) and disables only the output driver. |
| 2 | GND | power_in | Ground reference for the oscillator; a 0.1 µF capacitor should be placed between VCC and GND, on the device side of the PCB as close to the device as possible. |
| 3 | OUT | output | CMOS clock output at the programmed frequency (0.67 MHz to 170 MHz), with load specified at 15 pF max. |
| 4 | VCC | power_in | Power supply input; supply voltage range is 1.62 V to 3.63 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Seiko Epson |
| Package | SMD3225-4P |
| Category | Crystal Oscillator/Oscillator/Resonator |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output frequency range | fo | 0.67 | 170 | MHz | 1 | ||
| Supply voltage | VCC | 1.62 | 3.63 | V | 1 | ||
| Operating temperature (H variant, -40 ºC to +105 ºC) | T_use | -40 | 105 | ºC | 1 | ||
| Storage temperature | T_stg | -40 | 125 | ºC | Storage as single product. | 1 | |
| Frequency tolerance | f_tol | -50 | 50 | × 10-6 | Average frequency of 1s gate time. | 1 | |
| Current consumption, supply column *A (1.62 V to 1.98 V) | ICC | 3.4 | mA | T_use = +105 ºC; No load, fo = 20 MHz | 1 | ||
| Current consumption, supply column *B (1.98 V to 2.20 V) | ICC | 3.5 | mA | T_use = +105 ºC; No load, fo = 20 MHz | 1 | ||
| Current consumption, supply column *C (2.20 V to 2.80 V) | ICC | 3.6 | mA | T_use = +105 ºC; No load, fo = 20 MHz | 1 | ||
| Current consumption, supply column *D (2.70 V to 3.63 V) | ICC | 3.7 | mA | T_use = +105 ºC; No load, fo = 20 MHz | 1 | ||
| Current consumption, supply column *A (1.62 V to 1.98 V), 170 MHz | ICC | 5.7 | mA | T_use = +105 ºC; No load, fo = 170 MHz | 1 | ||
| Current consumption, supply column *B (1.98 V to 2.20 V), 170 MHz | ICC | 6 | mA | T_use = +105 ºC; No load, fo = 170 MHz | 1 | ||
| Current consumption, supply column *C (2.20 V to 2.80 V), 170 MHz | ICC | 6.9 | mA | T_use = +105 ºC; No load, fo = 170 MHz | 1 | ||
| Current consumption, supply column *D (2.70 V to 3.63 V), 170 MHz | ICC | 8.3 | mA | T_use = +105 ºC; No load, fo = 170 MHz | 1 | ||
| Output disable current, supply column *A (1.62 V to 1.98 V) | I_dis | 3.4 | mA | OE = GND, fo = 170 MHz | 1 | ||
| Output disable current, supply column *B (1.98 V to 2.20 V) | I_dis | 3.4 | mA | OE = GND, fo = 170 MHz | 1 | ||
| Output disable current, supply column *C (2.20 V to 2.80 V) | I_dis | 3.5 | mA | OE = GND, fo = 170 MHz | 1 | ||
| Output disable current, supply column *D (2.70 V to 3.63 V) | I_dis | 3.7 | mA | OE = GND, fo = 170 MHz | 1 | ||
| Standby current, supply column *A (1.62 V to 1.98 V) | I_std | 0.9 | μA | T_use = +105 ºC; ST¯¯ = GND | 1 | ||
| Standby current, supply column *B (1.98 V to 2.20 V) | I_std | 1 | μA | T_use = +105 ºC; ST¯¯ = GND | 1 | ||
| Standby current, supply column *C (2.20 V to 2.80 V) | I_std | 1.5 | μA | T_use = +105 ºC; ST¯¯ = GND | 1 | ||
| Standby current, supply column *D (2.70 V to 3.63 V) | I_std | 2.5 | μA | T_use = +105 ºC; ST¯¯ = GND | 1 | ||
| Symmetry | SYM | 45 | 55 | % | 50 % VCC Level | 1 | |
| Output voltage high | VOH | 90 | % VCC | IOH/IOL Conditions [mA] per drive setting table | 1 | ||
| Output voltage low | VOL | 10 | % VCC | IOH/IOL Conditions [mA] per drive setting table | 1 | ||
| Output load capacitance | L_CMOS | 15 | pF | 1 | |||
| Input voltage high (OE or ST¯¯) | VIH | 70 | % VCC | OE or ST¯¯ | 1 | ||
| Input voltage low (OE or ST¯¯) | VIL | 30 | % VCC | OE or ST¯¯ | 1 | ||
| Rise/fall time, Default, fo > 40 MHz | tr/tf | 3 | ns | Default, fo > 40 MHz; 20 % - 80 % VCC, L_CMOS = 15 pF | 1 | ||
| Rise/fall time, Default, fo ≤ 40 MHz | tr/tf | 6 | ns | Default, fo ≤ 40 MHz; 20 % - 80 % VCC, L_CMOS = 15 pF | 1 | ||
| Disable time | t_stp | 1 | μs | Measured from the time OE or ST¯¯ pin crosses 30 % VCC | 1 | ||
| Enable time | t_sta | 1 | μs | Measured from the time OE pin crosses 70 % VCC | 1 | ||
| Resume time | t_res | 3 | ms | Measured from the time ST¯¯ pin crosses 70 % VCC | 1 | ||
| Start-up time | t_str | 3 | ms | Measured from the time VCC reaches its rated minimum value, 1.62 V | 1 | ||
| ESD, Human Body Model (HBM) | 2000 | V | Human Body Model (HBM) | 6 | |||
| ESD, Machine Model (MM) | 250 | V | Machine Model (MM) | 6 | |||
| ESD, Charged Device Model (CDM) | 750 | V | Charged Device Model (CDM) | 6 |
CAD (KiCad official)
- Symbol:
SG-9101CE 12.000MHz D20PHAAA - Footprint:
Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm - 3D model: SMD3225-4P (KiCad packages3D, STEP)
- 3D model files:
sg-9101ce-12-000mhz-d20phaaa-etched.step/sg-9101ce-12-000mhz-d20phaaa-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sg-9101ce-12-000mhz-d20phaaa.step/sg-9101ce-12-000mhz-d20phaaa.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Seiko Epson datasheet (8 pp, sha256
8c21ae514c6e17a7, retrieved 2026-10-28, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).