main
Ray
Publish 0.1.0
bfe9b01
SG-9101CE 12.000000MHz C20PHAAA
Seiko Epson · Pre-programmed Oscillators · SMD3225-4P
SG-9101CE 12.000000MHz C20PHAAA from Seiko Epson, in a SMD3225-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE | input | Output enable: High outputs the specified frequency from OUT, Low sets OUT low (weak pull down) with only the output driver disabled; VIH 70 % VCC min, VIL 30 % VCC max. |
| 2 | GND | power_in | Ground; a 0.1 μF capacitor between VCC and GND should be placed close to the device for optimum jitter performance. |
| 3 | OUT | output | Clock output (CMOS, 0.67 MHz to 170 MHz, 15 pF max load), VOH 90 % VCC min and VOL 10 % VCC max. |
| 4 | VCC | power_in | Power supply, 1.62 V to 3.63 V, with a 0.1 μF capacitor to GND placed as close to the device as possible. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Seiko Epson |
| Package | SMD3225-4P |
| Category | Crystal Oscillator/Oscillator/Resonator |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 1.62 | 3.63 | V | 1.62 V to 3.63 V (1.80/2.50/3.30 V Typ.) | 1 | |
| Operating temperature | T_use | -40 | 105 | ºC | -40 ºC to +105 ºC option (H) | 1 | |
| Storage temperature | T_stg | -40 | 125 | ºC | Storage as single product. | 1 | |
| Frequency tolerance | f_tol | -50 | 50 | × 10-6 | Average frequency of 1s gate time. | 1 | |
| Output frequency | fo | 0.67 | 12 | 170 | MHz | Output frequency range; 12.000000MHz nominal for this MPN | 1 |
| Current consumption | ICC | 3.4 | mA | VCC 1.62 V to 1.98 V, T_use = +105 ºC, No load, fo = 20 MHz | 1 | ||
| Current consumption | ICC | 3.5 | mA | VCC 1.98 V to 2.20 V, T_use = +105 ºC, No load, fo = 20 MHz | 1 | ||
| Current consumption | ICC | 3.6 | mA | VCC 2.20 V to 2.80 V, T_use = +105 ºC, No load, fo = 20 MHz | 1 | ||
| Current consumption | ICC | 3.7 | mA | VCC 2.70 V to 3.63 V, T_use = +105 ºC, No load, fo = 20 MHz | 1 | ||
| Output disable current | I_dis | 3.4 | mA | VCC 1.62 V to 1.98 V, OE = GND, fo = 170 MHz | 1 | ||
| Output disable current | I_dis | 3.5 | mA | VCC 2.20 V to 2.80 V, OE = GND, fo = 170 MHz | 1 | ||
| Output disable current | I_dis | 3.7 | mA | VCC 2.70 V to 3.63 V, OE = GND, fo = 170 MHz | 1 | ||
| Symmetry | SYM | 45 | 55 | % | 50 % VCC Level | 1 | |
| Output voltage high | VOH | 90 | % VCC | 1 | |||
| Output voltage low | VOL | 10 | % VCC | 1 | |||
| Input voltage high (OE) | VIH | 70 | % VCC | OE or ST | 1 | ||
| Input voltage low (OE) | VIL | 30 | % VCC | OE or ST | 1 | ||
| Output load condition | L_CMOS | 15 | pF | 1 | |||
| Rise/Fall time (default) | tr/tf | 6 | ns | fo ≤ 40 MHz, 20 % - 80 % VCC, L_CMOS = 15 pF | 1 | ||
| Disable time | t_stp | 1 | μs | Measured from the time OE or ST pin crosses 30 % VCC | 1 | ||
| Enable time | t_sta | 1 | μs | Measured from the time OE pin crosses 70 % VCC | 1 | ||
| Start-up time | t_str | 3 | ms | Measured from the time VCC reaches its rated minimum value, 1.62 V | 1 | ||
| Output current IOH (default, fo ≤ 40 MHz) | IOH | -1.5 | mA | VCC 1.62 V to 1.98 V; Default (fo ≤ 40 MHz) | 1 | ||
| Output current IOH (default, fo ≤ 40 MHz) | IOH | -2 | mA | VCC 1.98 V to 2.20 V; Default (fo ≤ 40 MHz) | 1 | ||
| Output current IOH (default, fo ≤ 40 MHz) | IOH | -2.5 | mA | VCC 2.20 V to 2.80 V; Default (fo ≤ 40 MHz) | 1 | ||
| Output current IOH (default, fo ≤ 40 MHz) | IOH | -3 | mA | VCC 2.70 V to 3.63 V; Default (fo ≤ 40 MHz) | 1 | ||
| Output current IOL (default, fo ≤ 40 MHz) | IOL | 1.5 | mA | VCC 1.62 V to 1.98 V; Default (fo ≤ 40 MHz) | 1 | ||
| Output current IOL (default, fo ≤ 40 MHz) | IOL | 2 | mA | VCC 1.98 V to 2.20 V; Default (fo ≤ 40 MHz) | 1 | ||
| Output current IOL (default, fo ≤ 40 MHz) | IOL | 2.5 | mA | VCC 2.20 V to 2.80 V; Default (fo ≤ 40 MHz) | 1 | ||
| Output current IOL (default, fo ≤ 40 MHz) | IOL | 3 | mA | VCC 2.70 V to 3.63 V; Default (fo ≤ 40 MHz) | 1 | ||
| Current consumption | ICC | 2.9 | mA | 1.80 V Typ., T_use = +25 ºC, No load, fo = 20 MHz | 1 | ||
| Current consumption | ICC | 3 | mA | 2.50 V Typ., T_use = +25 ºC, No load, fo = 20 MHz | 1 | ||
| Current consumption | ICC | 3.2 | mA | 3.30 V Typ., T_use = +25 ºC, No load, fo = 20 MHz | 1 | ||
| ESD Human Body Model | HBM | 2000 | V | Breakdown voltage | 6 | ||
| ESD Machine Model | MM | 250 | V | Breakdown voltage | 6 | ||
| ESD Charged Device Model | CDM | 750 | V | Breakdown voltage | 6 |
CAD (KiCad official)
- Symbol:
SG-9101CE 12.000000MHz C20PHAAA - Footprint:
Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm - 3D model: SMD3225-4P (KiCad packages3D, STEP)
- 3D model files:
sg-9101ce-12-000000mhz-c20phaaa-etched.step/sg-9101ce-12-000000mhz-c20phaaa-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sg-9101ce-12-000000mhz-c20phaaa.step/sg-9101ce-12-000000mhz-c20phaaa.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Seiko Epson datasheet (8 pp, sha256
c922d8bc8c71a547, retrieved 2026-10-22, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SG-9101CE 12.000000MHz C20PHAAA
**Seiko Epson** · Pre-programmed Oscillators · SMD3225-4P
SG-9101CE 12.000000MHz C20PHAAA from Seiko Epson, in a SMD3225-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE | input | Output enable: High outputs the specified frequency from OUT, Low sets OUT low (weak pull down) with only the output driver disabled; VIH 70 % VCC min, VIL 30 % VCC max. |
| 2 | GND | power_in | Ground; a 0.1 μF capacitor between VCC and GND should be placed close to the device for optimum jitter performance. |
| 3 | OUT | output | Clock output (CMOS, 0.67 MHz to 170 MHz, 15 pF max load), VOH 90 % VCC min and VOL 10 % VCC max. |
| 4 | VCC | power_in | Power supply, 1.62 V to 3.63 V, with a 0.1 μF capacitor to GND placed as close to the device as possible. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Seiko Epson |
| Package | SMD3225-4P |
| Category | Crystal Oscillator/Oscillator/Resonator |
| Pins | 4 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 1.62 | | 3.63 | V | 1.62 V to 3.63 V (1.80/2.50/3.30 V Typ.) | 1 |
| Operating temperature | T_use | -40 | | 105 | ºC | -40 ºC to +105 ºC option (H) | 1 |
| Storage temperature | T_stg | -40 | | 125 | ºC | Storage as single product. | 1 |
| Frequency tolerance | f_tol | -50 | | 50 | × 10-6 | Average frequency of 1s gate time. | 1 |
| Output frequency | fo | 0.67 | 12 | 170 | MHz | Output frequency range; 12.000000MHz nominal for this MPN | 1 |
| Current consumption | ICC | | | 3.4 | mA | VCC 1.62 V to 1.98 V, T_use = +105 ºC, No load, fo = 20 MHz | 1 |
| Current consumption | ICC | | | 3.5 | mA | VCC 1.98 V to 2.20 V, T_use = +105 ºC, No load, fo = 20 MHz | 1 |
| Current consumption | ICC | | | 3.6 | mA | VCC 2.20 V to 2.80 V, T_use = +105 ºC, No load, fo = 20 MHz | 1 |
| Current consumption | ICC | | | 3.7 | mA | VCC 2.70 V to 3.63 V, T_use = +105 ºC, No load, fo = 20 MHz | 1 |
| Output disable current | I_dis | | | 3.4 | mA | VCC 1.62 V to 1.98 V, OE = GND, fo = 170 MHz | 1 |
| Output disable current | I_dis | | | 3.5 | mA | VCC 2.20 V to 2.80 V, OE = GND, fo = 170 MHz | 1 |
| Output disable current | I_dis | | | 3.7 | mA | VCC 2.70 V to 3.63 V, OE = GND, fo = 170 MHz | 1 |
| Symmetry | SYM | 45 | | 55 | % | 50 % VCC Level | 1 |
| Output voltage high | VOH | 90 | | | % VCC | | 1 |
| Output voltage low | VOL | | | 10 | % VCC | | 1 |
| Input voltage high (OE) | VIH | 70 | | | % VCC | OE or ST | 1 |
| Input voltage low (OE) | VIL | | | 30 | % VCC | OE or ST | 1 |
| Output load condition | L_CMOS | | | 15 | pF | | 1 |
| Rise/Fall time (default) | tr/tf | | | 6 | ns | fo ≤ 40 MHz, 20 % - 80 % VCC, L_CMOS = 15 pF | 1 |
| Disable time | t_stp | | | 1 | μs | Measured from the time OE or ST pin crosses 30 % VCC | 1 |
| Enable time | t_sta | | | 1 | μs | Measured from the time OE pin crosses 70 % VCC | 1 |
| Start-up time | t_str | | | 3 | ms | Measured from the time VCC reaches its rated minimum value, 1.62 V | 1 |
| Output current IOH (default, fo ≤ 40 MHz) | IOH | -1.5 | | | mA | VCC 1.62 V to 1.98 V; Default (fo ≤ 40 MHz) | 1 |
| Output current IOH (default, fo ≤ 40 MHz) | IOH | -2 | | | mA | VCC 1.98 V to 2.20 V; Default (fo ≤ 40 MHz) | 1 |
| Output current IOH (default, fo ≤ 40 MHz) | IOH | -2.5 | | | mA | VCC 2.20 V to 2.80 V; Default (fo ≤ 40 MHz) | 1 |
| Output current IOH (default, fo ≤ 40 MHz) | IOH | -3 | | | mA | VCC 2.70 V to 3.63 V; Default (fo ≤ 40 MHz) | 1 |
| Output current IOL (default, fo ≤ 40 MHz) | IOL | | 1.5 | | mA | VCC 1.62 V to 1.98 V; Default (fo ≤ 40 MHz) | 1 |
| Output current IOL (default, fo ≤ 40 MHz) | IOL | | 2 | | mA | VCC 1.98 V to 2.20 V; Default (fo ≤ 40 MHz) | 1 |
| Output current IOL (default, fo ≤ 40 MHz) | IOL | | 2.5 | | mA | VCC 2.20 V to 2.80 V; Default (fo ≤ 40 MHz) | 1 |
| Output current IOL (default, fo ≤ 40 MHz) | IOL | | 3 | | mA | VCC 2.70 V to 3.63 V; Default (fo ≤ 40 MHz) | 1 |
| Current consumption | ICC | | 2.9 | | mA | 1.80 V Typ., T_use = +25 ºC, No load, fo = 20 MHz | 1 |
| Current consumption | ICC | | 3 | | mA | 2.50 V Typ., T_use = +25 ºC, No load, fo = 20 MHz | 1 |
| Current consumption | ICC | | 3.2 | | mA | 3.30 V Typ., T_use = +25 ºC, No load, fo = 20 MHz | 1 |
| ESD Human Body Model | HBM | | | 2000 | V | Breakdown voltage | 6 |
| ESD Machine Model | MM | | | 250 | V | Breakdown voltage | 6 |
| ESD Charged Device Model | CDM | | | 750 | V | Breakdown voltage | 6 |
## CAD (KiCad official)
- Symbol: `SG-9101CE 12.000000MHz C20PHAAA`
- Footprint: `Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm`
- 3D model: SMD3225-4P (KiCad packages3D, STEP)
- 3D model files: `sg-9101ce-12-000000mhz-c20phaaa-etched.step` / `sg-9101ce-12-000000mhz-c20phaaa-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sg-9101ce-12-000000mhz-c20phaaa.step` / `sg-9101ce-12-000000mhz-c20phaaa.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Seiko Epson datasheet](docs/sg-9101ce-12-000000mhz-c20phaaa-datasheet.pdf) (8 pp, sha256 `c922d8bc8c71a547`, retrieved 2026-10-22, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sg-9101ce-12-000000mhz-c20phaaa-datasheet.pdf)