Generated by kicad-footprint-generator · KiCad file format 20260206
SG-8018CG 75.000000MHz TJHPA
Seiko Epson · Programmable Oscillators · SMD2520-4P
SG-8018CG 75.000000MHz TJHPA from Seiko Epson, in a SMD2520-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE | input | Output enable input: High gives the specified frequency at OUT, while Low forces OUT low through a weak pull-down and disables only the output driver, with VIH min 70% VCC, VIL max 30% VCC, and disable/enable times of 1 µs max. |
| 2 | GND | power_in | Power ground reference for the oscillator. |
| 3 | OUT | output | CMOS clock output with VOH min 90% VCC and VOL max 10% VCC, 3.0 ns max rise/fall time for fO > 40 MHz in default mode, and a 15 pF max load condition. |
| 4 | VCC | power_in | Power supply pin, rated 1.62 V to 3.63 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Seiko Epson |
| Package | SMD2520-4P |
| Category | Crystals, Oscillators, Resonators |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Symmetry | SYM | 45 | 50 | 55 | % | 50 % VCC Level | 1 |
| Output voltage high (DC) | VOH | 90 | % VCC | IOH/IOL Conditions [mA] table (*A to *D) | 1 | ||
| Output voltage low (DC) | VOL | 10 | % VCC | IOH/IOL Conditions [mA] table (*A to *D) | 1 | ||
| Output load capacitance | L_CMOS | 15 | pF | 1 | |||
| Input voltage high (OE or ST) | VIH | 70 | % VCC | OE or ST pin | 1 | ||
| Input voltage low (OE or ST) | VIL | 30 | % VCC | OE or ST pin | 1 | ||
| Rise/Fall time (Default) | tr/tf | 3 | ns | Default, fO > 40 MHz; 20 % - 80 % VCC, L_CMOS = 15 pF | 1 | ||
| Disable time | t_stp | 1 | μs | Measured from the time OE or ST pin crosses 30 % VCC | 1 | ||
| Enable time | t_sta | 1 | μs | Measured from the time OE pin crosses 70 % VCC | 1 | ||
| Resume time | t_res | 3 | ms | Measured from the time ST pin crosses 70 % VCC | 1 | ||
| Start-up time | t_str | 3 | ms | Measured from the time VCC reaches its rated minimum value, 1.62 V | 1 | ||
| Frequency tolerance | f_tol | -50 | 50 | × 10-6 | T_use = -40 ºC ~ +105 ºC | 1 | |
| Current consumption at fO = 20 MHz, VCC 1.62 V ~ 1.98 V | ICC | 3.2 | mA | No load, fO = 20 MHz, T_use = +105 ºC; VCC 1.62 V ~ 1.98 V (*A) | 1 | ||
| Current consumption at fO = 20 MHz, VCC 1.98 V ~ 2.20 V | ICC | 3.3 | mA | No load, fO = 20 MHz, T_use = +105 ºC; VCC 1.98 V ~ 2.20 V (*B) | 1 | ||
| Current consumption at fO = 20 MHz, VCC 2.20 V ~ 2.80 V | ICC | 3.4 | mA | No load, fO = 20 MHz, T_use = +105 ºC; VCC 2.20 V ~ 2.80 V (*C) | 1 | ||
| Current consumption at fO = 20 MHz, VCC 2.70 V ~ 3.63 V | ICC | 3.5 | mA | No load, fO = 20 MHz, T_use = +105 ºC; VCC 2.70 V ~ 3.63 V (*D) | 1 | ||
| Current consumption at fO = 170 MHz, VCC 1.62 V ~ 1.98 V | ICC | 5.5 | mA | No load, fO = 170 MHz, T_use = +105 ºC; VCC 1.62 V ~ 1.98 V (*A) | 1 | ||
| Current consumption at fO = 170 MHz, VCC 1.98 V ~ 2.20 V | ICC | 5.8 | mA | No load, fO = 170 MHz, T_use = +105 ºC; VCC 1.98 V ~ 2.20 V (*B) | 1 | ||
| Current consumption at fO = 170 MHz, VCC 2.20 V ~ 2.80 V | ICC | 6.7 | mA | No load, fO = 170 MHz, T_use = +105 ºC; VCC 2.20 V ~ 2.80 V (*C) | 1 | ||
| Current consumption at fO = 170 MHz, VCC 2.70 V ~ 3.63 V | ICC | 8.1 | mA | No load, fO = 170 MHz, T_use = +105 ºC; VCC 2.70 V ~ 3.63 V (*D) | 1 | ||
| Output disable current, VCC 1.62 V ~ 1.98 V | I_dis | 3.2 | mA | OE = GND, fO = 170 MHz; VCC 1.62 V ~ 1.98 V (*A) | 1 | ||
| Output disable current, VCC 1.98 V ~ 2.20 V | I_dis | 3.2 | mA | OE = GND, fO = 170 MHz; VCC 1.98 V ~ 2.20 V (*B) | 1 | ||
| Output disable current, VCC 2.20 V ~ 2.80 V | I_dis | 3.3 | mA | OE = GND, fO = 170 MHz; VCC 2.20 V ~ 2.80 V (*C) | 1 | ||
| Output disable current, VCC 2.70 V ~ 3.63 V | I_dis | 3.5 | mA | OE = GND, fO = 170 MHz; VCC 2.70 V ~ 3.63 V (*D) | 1 | ||
| Standby current, VCC 1.62 V ~ 1.98 V | I_std | 0.9 | μA | ST = GND, T_use = +105 ºC; VCC 1.62 V ~ 1.98 V (*A) | 1 | ||
| Standby current, VCC 1.98 V ~ 2.20 V | I_std | 1 | μA | ST = GND, T_use = +105 ºC; VCC 1.98 V ~ 2.20 V (*B) | 1 | ||
| Standby current, VCC 2.20 V ~ 2.80 V | I_std | 1.5 | μA | ST = GND, T_use = +105 ºC; VCC 2.20 V ~ 2.80 V (*C) | 1 | ||
| Standby current, VCC 2.70 V ~ 3.63 V | I_std | 2.5 | μA | ST = GND, T_use = +105 ºC; VCC 2.70 V ~ 3.63 V (*D) | 1 | ||
| Output frequency range | fO | 0.67 | 170 | MHz | 1 | ||
| Supply voltage | VCC | 1.62 | 3.63 | V | 1 | ||
| Operating temperature | T_use | -40 | 105 | ºC | 1 | ||
| Storage temperature | T_stg | -40 | 125 | ºC | Storage as single product | 1 | |
| ESD Human Body Model (HBM) | 2000 | V | 6 | ||||
| ESD Machine Model (MM) | 250 | V | 6 | ||||
| ESD Charged Device Model (CDM) | 750 | V | 6 |
CAD (KiCad official)
- Symbol:
SG-8018CG 75.000000MHz TJHPA - Footprint:
Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm - 3D model: SMD2520-4P (KiCad packages3D, STEP)
- 3D model files:
sg-8018cg-75-000000mhz-tjhpa-etched.step/sg-8018cg-75-000000mhz-tjhpa-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sg-8018cg-75-000000mhz-tjhpa.step/sg-8018cg-75-000000mhz-tjhpa.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Seiko Epson datasheet (8 pp, sha256
d9ac83422bac6bde, retrieved 2026-10-14, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).