component
SG-8018CG 20.000000MHz TJHSA
Public Made by Adomby adom
Seiko Epson Programmable Oscillators, SMD2520-4P. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSG-8018CG 20.000000MHz TJHSA
Seiko Epson · Programmable Oscillators · SMD2520-4P
SG-8018CG 20.000000MHz TJHSA from Seiko Epson, in a SMD2520-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ST | input | Active-low standby input: High gives the specified frequency output on OUT, while Low forces OUT low (weak pull-down) and puts the device into standby with supply current reduced to I_std. |
| 2 | GND | power_in | Ground pin for the oscillator; a 0.1 µF decoupling capacitor between VCC and GND should be placed as close to the device as possible for optimum jitter. |
| 3 | OUT | output | CMOS clock output, specified at a load of up to 15 pF (L_CMOS max) with the rise/fall time set by the ordering code. |
| 4 | VCC | power_in | Power supply input; the rated supply range is 1.62 V to 3.63 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Seiko Epson |
| Package | SMD2520-4P |
| Category | Crystals, Oscillators, Resonators |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (full device range; code T = 1.8 V ~ 3.3 V Typ.) | VCC | 1.62 | 3.63 | V | 1 | ||
| Output frequency range | fO | 0.67 | 170 | MHz | 1 | ||
| Storage temperature | T_stg | -40 | 125 | ºC | Storage as single product | 1 | |
| Operating temperature (code H) | T_use | -40 | 105 | ºC | 1 | ||
| Frequency tolerance (code J) | f_tol | -50 | 50 | × 10-6 | T_use = -40 ºC ~ +105 ºC; includes initial tolerance, temperature, supply, reflow, load drift and aging (+25 ºC, 10 years) | 1 | |
| Current consumption ICC, column 1.62 V ~ 1.98 V (*A) | ICC | 3.2 | mA | No load, fO = 20 MHz, T_use = +105 ºC | 1 | ||
| Current consumption ICC, column 1.98 V ~ 2.20 V (*B) | ICC | 3.3 | mA | No load, fO = 20 MHz, T_use = +105 ºC | 1 | ||
| Current consumption ICC, column 2.20 V ~ 2.80 V (*C) | ICC | 3.4 | mA | No load, fO = 20 MHz, T_use = +105 ºC | 1 | ||
| Current consumption ICC, column 2.70 V ~ 3.63 V (*D) | ICC | 3.5 | mA | No load, fO = 20 MHz, T_use = +105 ºC | 1 | ||
| Standby current I_std, column 1.62 V ~ 1.98 V | I_std | 0.9 | μA | ST¯¯ = GND, T_use = +105 ºC | 1 | ||
| Standby current I_std, column 1.98 V ~ 2.20 V | I_std | 1 | μA | ST¯¯ = GND, T_use = +105 ºC | 1 | ||
| Standby current I_std, column 2.20 V ~ 2.80 V | I_std | 1.5 | μA | ST¯¯ = GND, T_use = +105 ºC | 1 | ||
| Standby current I_std, column 2.70 V ~ 3.63 V | I_std | 2.5 | μA | ST¯¯ = GND, T_use = +105 ºC | 1 | ||
| Symmetry | SYM | 45 | 55 | % | 50 % VCC Level | 1 | |
| Output high voltage | VOH | 90 | % VCC | IOH/IOL conditions [mA] per table | 1 | ||
| Output low voltage | VOL | 10 | % VCC | IOH/IOL conditions [mA] per table | 1 | ||
| Output load condition | L_CMOS | 15 | pF | 1 | |||
| Input high voltage (OE or ST¯¯) | VIH | 70 | % VCC | OE or ST¯¯ pin | 1 | ||
| Input low voltage (OE or ST¯¯) | VIL | 30 | % VCC | OE or ST¯¯ pin | 1 | ||
| Rise/fall time, Default mode, fO ≤ 40 MHz (rise/fall code A) | tr/tf | 6 | ns | 20 % - 80 % VCC, L_CMOS = 15 pF | 1 | ||
| Disable time (ST¯¯ path) | t_stp | 1 | μs | Measured from the time OE or ST¯¯ pin crosses 30 % VCC | 1 | ||
| Resume time | t_res | 3 | ms | Measured from the time ST¯¯ pin crosses 70 % VCC | 1 | ||
| Start-up time | t_str | 3 | ms | Measured from the time VCC reaches its rated minimum value, 1.62 V | 1 |
CAD (KiCad official)
- Symbol:
SG-8018CG 20.000000MHz TJHSA - Footprint:
Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm - 3D model: SMD2520-4P (KiCad packages3D, STEP)
- 3D model files:
sg-8018cg-20-000000mhz-tjhsa-etched.step/sg-8018cg-20-000000mhz-tjhsa-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sg-8018cg-20-000000mhz-tjhsa.step/sg-8018cg-20-000000mhz-tjhsa.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Seiko Epson datasheet (8 pp, sha256
ad8481ab4b53133a, retrieved 2026-10-14, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).