main
Ray
Publish 0.1.0
7b29fc2
SG-8018CG 125.000000MHz TJHPA
Seiko Epson · Programmable Oscillators · SMD2520-4P
SG-8018CG 125.000000MHz TJHPA from Seiko Epson, in a SMD2520-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE | input | Output enable input: High gives the specified frequency at OUT, and Low forces OUT low through a weak pull-down while disabling only the output driver; VIH is 70% VCC min and VIL is 30% VCC max. This pin is the OE function because the ordering code ends in P (Output Enable), not S (Standby, which uses ST on this pin). |
| 2 | GND | power_in | Ground reference for the oscillator; the datasheet recommends a 0.1 µF capacitor between VCC and GND placed as close to the device as possible with short wiring. |
| 3 | OUT | output | CMOS clock output at the programmed frequency (0.67 MHz to 170 MHz for this family), with rise/fall time set by the ordering code (Default, Fast or Slow) and a 15 pF max load condition. |
| 4 | VCC | power_in | Power supply input; the rated supply range for this family is 1.62 V to 3.63 V, and the ordering code T selects 1.8 V to 3.3 V typical operation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Seiko Epson |
| Package | SMD2520-4P |
| Category | Crystals, Oscillators, Resonators |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (rated range) | VCC | 1.62 | 3.63 | V | Printed ranges 1.62-1.98 V, 1.98-2.20 V, 2.20-2.80 V, 2.70-3.63 V; T suffix covers 1.8-3.3 V Typ. | 1 | |
| Output frequency range | fO | 0.67 | 170 | MHz | 1 | ||
| Storage temperature | T_stg | -40 | 125 | ºC | Storage as single product. | 1 | |
| Operating temperature (H grade) | T_use | -40 | 105 | ºC | 1 | ||
| Frequency tolerance (J code, includes aging +25 ºC 10 years) | f_tol | -50 | 50 | × 10-6 | T_use = -40 ºC ~ +105 ºC | 1 | |
| Current consumption, max, VCC 1.62-1.98 V column | ICC | 3.2 | mA | T_use = +105 ºC; No load, fO = 20 MHz | 1 | ||
| Current consumption, max, VCC 1.98-2.20 V column | ICC | 3.3 | mA | T_use = +105 ºC; No load, fO = 20 MHz | 1 | ||
| Current consumption, max, VCC 2.20-2.80 V column | ICC | 3.4 | mA | T_use = +105 ºC; No load, fO = 20 MHz | 1 | ||
| Current consumption, max, VCC 2.70-3.63 V column | ICC | 3.5 | mA | T_use = +105 ºC; No load, fO = 20 MHz | 1 | ||
| Current consumption, max, VCC 1.62-1.98 V column | ICC | 5.5 | mA | T_use = +105 ºC; No load, fO = 170 MHz | 1 | ||
| Current consumption, max, VCC 1.98-2.20 V column | ICC | 5.8 | mA | T_use = +105 ºC; No load, fO = 170 MHz | 1 | ||
| Current consumption, max, VCC 2.20-2.80 V column | ICC | 6.7 | mA | T_use = +105 ºC; No load, fO = 170 MHz | 1 | ||
| Current consumption, max, VCC 2.70-3.63 V column | ICC | 8.1 | mA | T_use = +105 ºC; No load, fO = 170 MHz | 1 | ||
| Output disable current, max, VCC 1.62-1.98 V column | I_dis | 3.2 | mA | OE = GND, fO = 170 MHz | 1 | ||
| Output disable current, max, VCC 1.98-2.20 V column | I_dis | 3.2 | mA | OE = GND, fO = 170 MHz | 1 | ||
| Output disable current, max, VCC 2.20-2.80 V column | I_dis | 3.3 | mA | OE = GND, fO = 170 MHz | 1 | ||
| Output disable current, max, VCC 2.70-3.63 V column | I_dis | 3.5 | mA | OE = GND, fO = 170 MHz | 1 | ||
| Standby current, max, VCC 1.62-1.98 V column | I_std | 0.9 | μA | T_use = +105 ºC; ST¯¯ = GND | 1 | ||
| Standby current, max, VCC 1.98-2.20 V column | I_std | 1 | μA | T_use = +105 ºC; ST¯¯ = GND | 1 | ||
| Standby current, max, VCC 2.20-2.80 V column | I_std | 1.5 | μA | T_use = +105 ºC; ST¯¯ = GND | 1 | ||
| Standby current, max, VCC 2.70-3.63 V column | I_std | 2.5 | μA | T_use = +105 ºC; ST¯¯ = GND | 1 | ||
| Symmetry | SYM | 45 | 55 | % | 50 % VCC Level | 1 | |
| Output high voltage, Default (fO > 40 MHz) / Fast | VOH | 90 | % VCC | IOH -2.5/-3.5/-4.0/-5.0 mA for *A/*B/*C/*D | 1 | ||
| Output high voltage, Default (fO ≤ 40 MHz) | VOH | 90 | % VCC | IOH -1.5/-2.0/-2.5/-3.0 mA for *A/*B/*C/*D | 1 | ||
| Output high voltage, Slow | VOH | 90 | % VCC | IOH -1.0/-1.5/-2.0/-2.5 mA for *A/*B/*C/*D | 1 | ||
| Output low voltage, Default (fO > 40 MHz) / Fast | VOL | 10 | % VCC | IOL 2.5/3.5/4.0/5.0 mA for *A/*B/*C/*D | 1 | ||
| Output low voltage, Default (fO ≤ 40 MHz) | VOL | 10 | % VCC | IOL 1.5/2.0/2.5/3.0 mA for *A/*B/*C/*D | 1 | ||
| Output low voltage, Slow | VOL | 10 | % VCC | IOL 1.0/1.5/2.0/2.5 mA for *A/*B/*C/*D | 1 | ||
| Output load condition | L_CMOS | 15 | pF | 1 | |||
| Input high voltage (OE or ST) | VIH | 70 | % VCC | OE or ST¯¯ | 1 | ||
| Input low voltage (OE or ST) | VIL | 30 | % VCC | OE or ST¯¯ | 1 | ||
| Rise/fall time, Default | tr/tf | 3 | ns | 20 % - 80 % VCC, L_CMOS = 15 pF; fO > 40 MHz | 1 | ||
| Rise/fall time, Default | tr/tf | 6 | ns | 20 % - 80 % VCC, L_CMOS = 15 pF; fO ≤ 40 MHz | 1 | ||
| Rise/fall time, Fast | tr/tf | 3 | ns | 20 % - 80 % VCC, L_CMOS = 15 pF; fO = 0.67 MHz ~ 170 MHz | 1 | ||
| Rise/fall time, Slow | tr/tf | 10 | ns | 20 % - 80 % VCC, L_CMOS = 15 pF; fO = 0.67 MHz ~ 20 MHz | 1 | ||
| Disable time | t_stp | 1 | μs | Measured from the time OE or ST¯¯ pin crosses 30 % VCC | 1 | ||
| Enable time | t_sta | 1 | μs | Measured from the time OE pin crosses 70 % VCC | 1 | ||
| Resume time | t_res | 3 | ms | Measured from the time ST¯¯ pin crosses 70 % VCC | 1 | ||
| Start-up time | t_str | 3 | ms | Measured from the time VCC reaches its rated minimum value, 1.62 V | 1 | ||
| ESD Human Body Model (HBM) breakdown voltage | 2000 | V | Breakdown voltage | 6 | |||
| ESD Machine Model (MM) breakdown voltage | 250 | V | Breakdown voltage | 6 | |||
| ESD Charged Device Model (CDM) breakdown voltage | 750 | V | Breakdown voltage | 6 |
CAD (KiCad official)
- Symbol:
SG-8018CG 125.000000MHz TJHPA - Footprint:
Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm - 3D model: SMD2520-4P (KiCad packages3D, STEP)
- 3D model files:
sg-8018cg-125-000000mhz-tjhpa-etched.step/sg-8018cg-125-000000mhz-tjhpa-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sg-8018cg-125-000000mhz-tjhpa.step/sg-8018cg-125-000000mhz-tjhpa.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Seiko Epson datasheet (8 pp, sha256
eb89afd0b8add1d1, retrieved 2026-10-16, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SG-8018CG 125.000000MHz TJHPA
**Seiko Epson** · Programmable Oscillators · SMD2520-4P
SG-8018CG 125.000000MHz TJHPA from Seiko Epson, in a SMD2520-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE | input | Output enable input: High gives the specified frequency at OUT, and Low forces OUT low through a weak pull-down while disabling only the output driver; VIH is 70% VCC min and VIL is 30% VCC max. This pin is the OE function because the ordering code ends in P (Output Enable), not S (Standby, which uses ST on this pin). |
| 2 | GND | power_in | Ground reference for the oscillator; the datasheet recommends a 0.1 µF capacitor between VCC and GND placed as close to the device as possible with short wiring. |
| 3 | OUT | output | CMOS clock output at the programmed frequency (0.67 MHz to 170 MHz for this family), with rise/fall time set by the ordering code (Default, Fast or Slow) and a 15 pF max load condition. |
| 4 | VCC | power_in | Power supply input; the rated supply range for this family is 1.62 V to 3.63 V, and the ordering code T selects 1.8 V to 3.3 V typical operation. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Seiko Epson |
| Package | SMD2520-4P |
| Category | Crystals, Oscillators, Resonators |
| Pins | 4 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (rated range) | VCC | 1.62 | | 3.63 | V | Printed ranges 1.62-1.98 V, 1.98-2.20 V, 2.20-2.80 V, 2.70-3.63 V; T suffix covers 1.8-3.3 V Typ. | 1 |
| Output frequency range | fO | 0.67 | | 170 | MHz | | 1 |
| Storage temperature | T_stg | -40 | | 125 | ºC | Storage as single product. | 1 |
| Operating temperature (H grade) | T_use | -40 | | 105 | ºC | | 1 |
| Frequency tolerance (J code, includes aging +25 ºC 10 years) | f_tol | -50 | | 50 | × 10-6 | T_use = -40 ºC ~ +105 ºC | 1 |
| Current consumption, max, VCC 1.62-1.98 V column | ICC | | | 3.2 | mA | T_use = +105 ºC; No load, fO = 20 MHz | 1 |
| Current consumption, max, VCC 1.98-2.20 V column | ICC | | | 3.3 | mA | T_use = +105 ºC; No load, fO = 20 MHz | 1 |
| Current consumption, max, VCC 2.20-2.80 V column | ICC | | | 3.4 | mA | T_use = +105 ºC; No load, fO = 20 MHz | 1 |
| Current consumption, max, VCC 2.70-3.63 V column | ICC | | | 3.5 | mA | T_use = +105 ºC; No load, fO = 20 MHz | 1 |
| Current consumption, max, VCC 1.62-1.98 V column | ICC | | | 5.5 | mA | T_use = +105 ºC; No load, fO = 170 MHz | 1 |
| Current consumption, max, VCC 1.98-2.20 V column | ICC | | | 5.8 | mA | T_use = +105 ºC; No load, fO = 170 MHz | 1 |
| Current consumption, max, VCC 2.20-2.80 V column | ICC | | | 6.7 | mA | T_use = +105 ºC; No load, fO = 170 MHz | 1 |
| Current consumption, max, VCC 2.70-3.63 V column | ICC | | | 8.1 | mA | T_use = +105 ºC; No load, fO = 170 MHz | 1 |
| Output disable current, max, VCC 1.62-1.98 V column | I_dis | | | 3.2 | mA | OE = GND, fO = 170 MHz | 1 |
| Output disable current, max, VCC 1.98-2.20 V column | I_dis | | | 3.2 | mA | OE = GND, fO = 170 MHz | 1 |
| Output disable current, max, VCC 2.20-2.80 V column | I_dis | | | 3.3 | mA | OE = GND, fO = 170 MHz | 1 |
| Output disable current, max, VCC 2.70-3.63 V column | I_dis | | | 3.5 | mA | OE = GND, fO = 170 MHz | 1 |
| Standby current, max, VCC 1.62-1.98 V column | I_std | | | 0.9 | μA | T_use = +105 ºC; ST¯¯ = GND | 1 |
| Standby current, max, VCC 1.98-2.20 V column | I_std | | | 1 | μA | T_use = +105 ºC; ST¯¯ = GND | 1 |
| Standby current, max, VCC 2.20-2.80 V column | I_std | | | 1.5 | μA | T_use = +105 ºC; ST¯¯ = GND | 1 |
| Standby current, max, VCC 2.70-3.63 V column | I_std | | | 2.5 | μA | T_use = +105 ºC; ST¯¯ = GND | 1 |
| Symmetry | SYM | 45 | | 55 | % | 50 % VCC Level | 1 |
| Output high voltage, Default (fO > 40 MHz) / Fast | VOH | 90 | | | % VCC | IOH -2.5/-3.5/-4.0/-5.0 mA for *A/*B/*C/*D | 1 |
| Output high voltage, Default (fO ≤ 40 MHz) | VOH | 90 | | | % VCC | IOH -1.5/-2.0/-2.5/-3.0 mA for *A/*B/*C/*D | 1 |
| Output high voltage, Slow | VOH | 90 | | | % VCC | IOH -1.0/-1.5/-2.0/-2.5 mA for *A/*B/*C/*D | 1 |
| Output low voltage, Default (fO > 40 MHz) / Fast | VOL | | | 10 | % VCC | IOL 2.5/3.5/4.0/5.0 mA for *A/*B/*C/*D | 1 |
| Output low voltage, Default (fO ≤ 40 MHz) | VOL | | | 10 | % VCC | IOL 1.5/2.0/2.5/3.0 mA for *A/*B/*C/*D | 1 |
| Output low voltage, Slow | VOL | | | 10 | % VCC | IOL 1.0/1.5/2.0/2.5 mA for *A/*B/*C/*D | 1 |
| Output load condition | L_CMOS | | | 15 | pF | | 1 |
| Input high voltage (OE or ST) | VIH | 70 | | | % VCC | OE or ST¯¯ | 1 |
| Input low voltage (OE or ST) | VIL | | | 30 | % VCC | OE or ST¯¯ | 1 |
| Rise/fall time, Default | tr/tf | | | 3 | ns | 20 % - 80 % VCC, L_CMOS = 15 pF; fO > 40 MHz | 1 |
| Rise/fall time, Default | tr/tf | | | 6 | ns | 20 % - 80 % VCC, L_CMOS = 15 pF; fO ≤ 40 MHz | 1 |
| Rise/fall time, Fast | tr/tf | | | 3 | ns | 20 % - 80 % VCC, L_CMOS = 15 pF; fO = 0.67 MHz ~ 170 MHz | 1 |
| Rise/fall time, Slow | tr/tf | | | 10 | ns | 20 % - 80 % VCC, L_CMOS = 15 pF; fO = 0.67 MHz ~ 20 MHz | 1 |
| Disable time | t_stp | | | 1 | μs | Measured from the time OE or ST¯¯ pin crosses 30 % VCC | 1 |
| Enable time | t_sta | | | 1 | μs | Measured from the time OE pin crosses 70 % VCC | 1 |
| Resume time | t_res | | | 3 | ms | Measured from the time ST¯¯ pin crosses 70 % VCC | 1 |
| Start-up time | t_str | | | 3 | ms | Measured from the time VCC reaches its rated minimum value, 1.62 V | 1 |
| ESD Human Body Model (HBM) breakdown voltage | | | | 2000 | V | Breakdown voltage | 6 |
| ESD Machine Model (MM) breakdown voltage | | | | 250 | V | Breakdown voltage | 6 |
| ESD Charged Device Model (CDM) breakdown voltage | | | | 750 | V | Breakdown voltage | 6 |
## CAD (KiCad official)
- Symbol: `SG-8018CG 125.000000MHz TJHPA`
- Footprint: `Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm`
- 3D model: SMD2520-4P (KiCad packages3D, STEP)
- 3D model files: `sg-8018cg-125-000000mhz-tjhpa-etched.step` / `sg-8018cg-125-000000mhz-tjhpa-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sg-8018cg-125-000000mhz-tjhpa.step` / `sg-8018cg-125-000000mhz-tjhpa.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Seiko Epson datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588933693590790144) (8 pp, sha256 `eb89afd0b8add1d1`, retrieved 2026-10-16, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sg-8018cg-125-000000mhz-tjhpa-datasheet.pdf)