main
Ray
Publish 0.1.0
480d7fe
SG-8018CE 80.000000MHz TJHPA
Seiko Epson · Programmable Oscillators · SMD3225-4P
SG-8018CE 80.000000MHz TJHPA from Seiko Epson, in a SMD3225-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE | input | Output enable: High gives the specified frequency output from the OUT pin; Low forces the OUT pin low (weak pull-down) and disables only the output driver. Shared with ST in the datasheet, but the TJHPA ordering suffix (P = Output Enable) selects OE; VIH is 70 % VCC min and VIL is 30 % VCC max. |
| 2 | GND | power_in | Ground pin; a 0.1 µF capacitor should be placed between VCC and GND as close to the device as possible for optimum jitter performance. |
| 3 | OUT | output | CMOS clock output; rise/fall time is selectable as Default, Fast or Slow, with a load of 15 pF max (L_CMOS). |
| 4 | VCC | power_in | Power supply; the rated supply range for this part is 1.62 V to 3.63 V, and the 1.8 V ~ 3.3 V (typ.) option is ordered with the T code. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Seiko Epson |
| Package | SMD3225-4P |
| Category | Crystals, Oscillators, Resonators |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 1.62 | 3.63 | V | Product supply voltage range; variant T is printed as 1.8 V ~ 3.3 V Typ. | 1 | |
| Output frequency range | fO | 0.67 | 170 | MHz | Output frequency range (80 MHz is within range) | 1 | |
| Frequency tolerance | f_tol | -50 | 50 | × 10-6 | J: ±50 × 10-6; T_use = -40 ºC ~ +105 ºC; includes aging (+25 ºC, 10 years) | 1 | |
| Operating temperature | T_use | -40 | 105 | ºC | Variant H: -40 ºC ~ +105 ºC | 1 | |
| Storage temperature | T_stg | -40 | 125 | ºC | Storage as single product | 1 | |
| Symmetry | SYM | 45 | 55 | % | 50 % VCC level | 1 | |
| Output voltage high | VOH | 90 | % VCC | DC characteristics; IOH per IOH/IOL conditions table | 1 | ||
| Output voltage low | VOL | 10 | % VCC | DC characteristics; IOL per IOH/IOL conditions table | 1 | ||
| Output load capacitance | L_CMOS | 15 | pF | Output load condition | 1 | ||
| Input voltage high | VIH | 70 | % VCC | OE or ST pin | 1 | ||
| Input voltage low | VIL | 30 | % VCC | OE or ST pin | 1 | ||
| Rise/fall time (Default) | tr/tf | 3 | ns | Default, fO > 40 MHz; 20 % - 80 % VCC, L_CMOS = 15 pF | 1 | ||
| Disable time | t_stp | 1 | μs | Measured from OE or ST pin crosses 30 % VCC | 1 | ||
| Enable time | t_sta | 1 | μs | Measured from OE pin crosses 70 % VCC | 1 | ||
| Resume time | t_res | 3 | ms | Measured from ST pin crosses 70 % VCC | 1 | ||
| Start-up time | t_str | 3 | ms | Measured from VCC reaches its rated minimum value, 1.62 V | 1 |
CAD (KiCad official)
- Symbol:
SG-8018CE 80.000000MHz TJHPA - Footprint:
Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm - 3D model: SMD3225-4P (KiCad packages3D, STEP)
- 3D model files:
sg-8018ce-80-000000mhz-tjhpa-etched.step/sg-8018ce-80-000000mhz-tjhpa-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sg-8018ce-80-000000mhz-tjhpa.step/sg-8018ce-80-000000mhz-tjhpa.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Seiko Epson datasheet (8 pp, sha256
b9c5a9a0bdeb13e6, retrieved 2026-10-13, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SG-8018CE 80.000000MHz TJHPA
**Seiko Epson** · Programmable Oscillators · SMD3225-4P
SG-8018CE 80.000000MHz TJHPA from Seiko Epson, in a SMD3225-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE | input | Output enable: High gives the specified frequency output from the OUT pin; Low forces the OUT pin low (weak pull-down) and disables only the output driver. Shared with ST in the datasheet, but the TJHPA ordering suffix (P = Output Enable) selects OE; VIH is 70 % VCC min and VIL is 30 % VCC max. |
| 2 | GND | power_in | Ground pin; a 0.1 µF capacitor should be placed between VCC and GND as close to the device as possible for optimum jitter performance. |
| 3 | OUT | output | CMOS clock output; rise/fall time is selectable as Default, Fast or Slow, with a load of 15 pF max (L_CMOS). |
| 4 | VCC | power_in | Power supply; the rated supply range for this part is 1.62 V to 3.63 V, and the 1.8 V ~ 3.3 V (typ.) option is ordered with the T code. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Seiko Epson |
| Package | SMD3225-4P |
| Category | Crystals, Oscillators, Resonators |
| Pins | 4 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 1.62 | | 3.63 | V | Product supply voltage range; variant T is printed as 1.8 V ~ 3.3 V Typ. | 1 |
| Output frequency range | fO | 0.67 | | 170 | MHz | Output frequency range (80 MHz is within range) | 1 |
| Frequency tolerance | f_tol | -50 | | 50 | × 10-6 | J: ±50 × 10-6; T_use = -40 ºC ~ +105 ºC; includes aging (+25 ºC, 10 years) | 1 |
| Operating temperature | T_use | -40 | | 105 | ºC | Variant H: -40 ºC ~ +105 ºC | 1 |
| Storage temperature | T_stg | -40 | | 125 | ºC | Storage as single product | 1 |
| Symmetry | SYM | 45 | | 55 | % | 50 % VCC level | 1 |
| Output voltage high | VOH | 90 | | | % VCC | DC characteristics; IOH per IOH/IOL conditions table | 1 |
| Output voltage low | VOL | | | 10 | % VCC | DC characteristics; IOL per IOH/IOL conditions table | 1 |
| Output load capacitance | L_CMOS | | | 15 | pF | Output load condition | 1 |
| Input voltage high | VIH | 70 | | | % VCC | OE or ST pin | 1 |
| Input voltage low | VIL | | | 30 | % VCC | OE or ST pin | 1 |
| Rise/fall time (Default) | tr/tf | | | 3 | ns | Default, fO > 40 MHz; 20 % - 80 % VCC, L_CMOS = 15 pF | 1 |
| Disable time | t_stp | | | 1 | μs | Measured from OE or ST pin crosses 30 % VCC | 1 |
| Enable time | t_sta | | | 1 | μs | Measured from OE pin crosses 70 % VCC | 1 |
| Resume time | t_res | | | 3 | ms | Measured from ST pin crosses 70 % VCC | 1 |
| Start-up time | t_str | | | 3 | ms | Measured from VCC reaches its rated minimum value, 1.62 V | 1 |
## CAD (KiCad official)
- Symbol: `SG-8018CE 80.000000MHz TJHPA`
- Footprint: `Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm`
- 3D model: SMD3225-4P (KiCad packages3D, STEP)
- 3D model files: `sg-8018ce-80-000000mhz-tjhpa-etched.step` / `sg-8018ce-80-000000mhz-tjhpa-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sg-8018ce-80-000000mhz-tjhpa.step` / `sg-8018ce-80-000000mhz-tjhpa.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Seiko Epson datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588919306184757248) (8 pp, sha256 `b9c5a9a0bdeb13e6`, retrieved 2026-10-13, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sg-8018ce-80-000000mhz-tjhpa-datasheet.pdf)