Generated by kicad-footprint-generator · KiCad file format 20260206
SG-8018CE 8.250000MHz TJHPA
Seiko Epson · Pre-programmed Oscillators · SMD3225-4P
SG-8018CE 8.250000MHz TJHPA from Seiko Epson, in a SMD3225-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE | input | Output enable: High gives the specified frequency output on OUT, Low forces OUT low with a weak pull-down and disables only the output driver, with VIH minimum 70 % VCC and VIL maximum 30 % VCC. |
| 2 | GND | power_in | Ground reference; a 0.1 μF capacitor between VCC and GND should be placed as close to the device as possible for optimum jitter performance. |
| 3 | OUT | output | CMOS clock output rated for a maximum load of 15 pF, with 3.0 ns maximum rise and fall time in the Default mode above 40 MHz. |
| 4 | VCC | power_in | Power supply input with a rated supply voltage range of 1.62 V to 3.63 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Seiko Epson |
| Package | SMD3225-4P |
| Category | Crystals/Oscillators/Resonators |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 1.62 | 3.63 | V | 1 | ||
| Output frequency range | fO | 0.67 | 170 | MHz | 1 | ||
| Frequency tolerance | f_tol | -50 | 50 | ppm | T_use = -40 ºC ~ +105 ºC; includes aging (+25 ºC, 10 years) | 1 | |
| Operating temperature | T_use | -40 | 105 | ºC | 1 | ||
| Storage temperature | T_stg | -40 | 125 | ºC | Storage as single product | 1 | |
| Current consumption at 105 ºC, 1.62 V ~ 1.98 V | ICC | 3.2 | mA | T_use = +105 ºC; No load, fO = 20 MHz | 1 | ||
| Current consumption at 105 ºC, 1.98 V ~ 2.20 V | ICC | 3.3 | mA | T_use = +105 ºC; No load, fO = 20 MHz | 1 | ||
| Current consumption at 105 ºC, 2.20 V ~ 2.80 V | ICC | 3.4 | mA | T_use = +105 ºC; No load, fO = 20 MHz | 1 | ||
| Current consumption at 105 ºC, 2.70 V ~ 3.63 V | ICC | 3.5 | mA | T_use = +105 ºC; No load, fO = 20 MHz | 1 | ||
| Current consumption at 25 ºC, 1.8 V typ. | ICC | 2.7 | mA | T_use = +25 ºC; No load, fO = 20 MHz | 1 | ||
| Current consumption at 25 ºC, 2.5 V typ. | ICC | 2.9 | mA | T_use = +25 ºC; No load, fO = 20 MHz | 1 | ||
| Current consumption at 25 ºC, 3.3 V typ. | ICC | 3 | mA | T_use = +25 ºC; No load, fO = 20 MHz | 1 | ||
| Current consumption at 105 ºC, 1.62 V ~ 1.98 V (170 MHz) | ICC | 5.5 | mA | T_use = +105 ºC; No load, fO = 170 MHz | 1 | ||
| Current consumption at 105 ºC, 1.98 V ~ 2.20 V (170 MHz) | ICC | 5.8 | mA | T_use = +105 ºC; No load, fO = 170 MHz | 1 | ||
| Current consumption at 105 ºC, 2.20 V ~ 2.80 V (170 MHz) | ICC | 6.7 | mA | T_use = +105 ºC; No load, fO = 170 MHz | 1 | ||
| Current consumption at 105 ºC, 2.70 V ~ 3.63 V (170 MHz) | ICC | 8.1 | mA | T_use = +105 ºC; No load, fO = 170 MHz | 1 | ||
| Current consumption at 25 ºC, 1.8 V typ. (170 MHz) | ICC | 4.7 | mA | T_use = +25 ºC; No load, fO = 170 MHz | 1 | ||
| Current consumption at 25 ºC, 2.5 V typ. (170 MHz) | ICC | 5.7 | mA | T_use = +25 ºC; No load, fO = 170 MHz | 1 | ||
| Current consumption at 25 ºC, 3.3 V typ. (170 MHz) | ICC | 6.8 | mA | T_use = +25 ºC; No load, fO = 170 MHz | 1 | ||
| Output disable current, 1.62 V ~ 1.98 V | I_dis | 3.2 | mA | OE = GND, fO = 170 MHz | 1 | ||
| Output disable current, 1.98 V ~ 2.20 V | I_dis | 3.2 | mA | OE = GND, fO = 170 MHz | 1 | ||
| Output disable current, 2.20 V ~ 2.80 V | I_dis | 3.3 | mA | OE = GND, fO = 170 MHz | 1 | ||
| Output disable current, 2.70 V ~ 3.63 V | I_dis | 3.5 | mA | OE = GND, fO = 170 MHz | 1 | ||
| Standby current at 105 ºC, 1.62 V ~ 1.98 V | I_std | 0.9 | μA | T_use = +105 ºC; ST = GND | 1 | ||
| Standby current at 105 ºC, 1.98 V ~ 2.20 V | I_std | 1 | μA | T_use = +105 ºC; ST = GND | 1 | ||
| Standby current at 105 ºC, 2.20 V ~ 2.80 V | I_std | 1.5 | μA | T_use = +105 ºC; ST = GND | 1 | ||
| Standby current at 105 ºC, 2.70 V ~ 3.63 V | I_std | 2.5 | μA | T_use = +105 ºC; ST = GND | 1 | ||
| Standby current at 25 ºC, 1.8 V typ. | I_std | 0.3 | μA | T_use = +25 ºC; ST = GND | 1 | ||
| Standby current at 25 ºC, 2.5 V typ. | I_std | 0.4 | μA | T_use = +25 ºC; ST = GND | 1 | ||
| Standby current at 25 ºC, 3.3 V typ. | I_std | 0.5 | μA | T_use = +25 ºC; ST = GND | 1 | ||
| Symmetry | SYM | 45 | 50 | 55 | % | 50 % VCC level | 1 |
| Output voltage high | VOH | 90 | % VCC | IOH/IOL per Rise/Fall time and VCC table | 1 | ||
| Output voltage low | VOL | 10 | % VCC | IOH/IOL per Rise/Fall time and VCC table | 1 | ||
| Input voltage high | VIH | 70 | % VCC | OE or ST pin | 1 | ||
| Input voltage low | VIL | 30 | % VCC | OE or ST pin | 1 | ||
| Output load capacitance | L_CMOS | 15 | pF | 1 | |||
| Rise and fall time (default, fO > 40 MHz) | tr/tf | 3 | ns | fO > 40 MHz; 20 % - 80 % VCC, L_CMOS = 15 pF | 1 | ||
| Rise and fall time (default, fO ≤ 40 MHz) | tr/tf | 6 | ns | fO ≤ 40 MHz; 20 % - 80 % VCC, L_CMOS = 15 pF | 1 | ||
| Disable time | t_stp | 1 | μs | Measured from the time OE or ST pin crosses 30 % VCC | 1 | ||
| Enable time | t_sta | 1 | μs | Measured from the time OE pin crosses 70 % VCC | 1 | ||
| Resume time | t_res | 3 | ms | Measured from the time ST pin crosses 70 % VCC | 1 | ||
| Start-up time | t_str | 3 | ms | Measured from the time VCC reaches its rated minimum value, 1.62 V | 1 | ||
| ESD Human Body Model | 2000 | V | Human Body Model (HBM) | 6 | |||
| ESD Machine Model | 250 | V | Machine Model (MM) | 6 | |||
| ESD Charged Device Model | 750 | V | Charged Device Model (CDM) | 6 |
CAD (KiCad official)
- Symbol:
SG-8018CE 8.250000MHz TJHPA - Footprint:
Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm - 3D model: SMD3225-4P (KiCad packages3D, STEP)
- 3D model files:
sg-8018ce-8-250000mhz-tjhpa-etched.step/sg-8018ce-8-250000mhz-tjhpa-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sg-8018ce-8-250000mhz-tjhpa.step/sg-8018ce-8-250000mhz-tjhpa.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Seiko Epson datasheet (8 pp, sha256
66106b2fbcc3070c, retrieved 2026-11-02, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).