main
Ray
Publish 0.1.0
2bb222e
SG-8018CE 54.000000MHz TJHSA
Seiko Epson · Programmable Oscillators · SMD3225-4P
SG-8018CE 54.000000MHz TJHSA from Seiko Epson, in a SMD3225-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ST | input | Standby pin, shared with OE on the OE-function variant: when Low, OUT is pulled low through a weak pull-down and the device enters standby, reducing supply current to I_std (max 2.5 μA at T_use = +105 ºC); when High, the specified frequency is output, with resume time of 3 ms max measured at 70 % VCC. |
| 2 | GND | power_in | Ground pin, which must be connected to the 0.1 μF VCC-to-GND decoupling capacitor placed close to the device. |
| 3 | OUT | output | CMOS clock output at the specified frequency when enabled (OE High or ST High), with rise/fall time set by the ordering code and a 15 pF max load (L_CMOS). |
| 4 | VCC | power_in | Power supply pin, rated 1.62 V to 3.63 V, to be bypassed with a 0.1 μF capacitor to GND placed as close to the device as possible. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Seiko Epson |
| Package | SMD3225-4P |
| Category | Crystals, Oscillators, Resonators |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (variant T) | VCC | 1.62 | 3.63 | V | Variant T (1.8 V ~ 3.3 V typ.); sub-ranges 1.62-1.98 / 1.98-2.20 / 2.20-2.80 / 2.70-3.63 V | 1 | |
| Output frequency range | fO | 0.67 | 170 | MHz | Output frequency range | 1 | |
| Operating temperature (grade H) | T_use | -40 | 105 | ºC | Operating temperature, grade H | 1 | |
| Storage temperature | T_stg | -40 | 125 | ºC | Storage as single product | 1 | |
| Frequency tolerance (J) | f_tol | -50 | 50 | × 10-6 | T_use = -40 ºC ~ +105 ºC; includes temperature, supply, reflow, load and aging (+25 ºC, 10 years) | 1 | |
| Current consumption, 1.62-1.98 V | ICC | 3.2 | mA | T_use = +105 ºC, No load, fO = 20 MHz, VCC 1.62-1.98 V (column mapped by order) | 1 | ||
| Current consumption, 1.98-2.20 V | ICC | 3.3 | mA | T_use = +105 ºC, No load, fO = 20 MHz, VCC 1.98-2.20 V (column mapped by order) | 1 | ||
| Current consumption, 2.20-2.80 V | ICC | 3.4 | mA | T_use = +105 ºC, No load, fO = 20 MHz, VCC 2.20-2.80 V (column mapped by order) | 1 | ||
| Current consumption, 2.70-3.63 V | ICC | 3.5 | mA | T_use = +105 ºC, No load, fO = 20 MHz, VCC 2.70-3.63 V (column mapped by order) | 1 | ||
| Current consumption, 1.62-1.98 V | ICC | 5.5 | mA | T_use = +105 ºC, No load, fO = 170 MHz, VCC 1.62-1.98 V (column mapped by order) | 1 | ||
| Current consumption, 1.98-2.20 V | ICC | 5.8 | mA | T_use = +105 ºC, No load, fO = 170 MHz, VCC 1.98-2.20 V (column mapped by order) | 1 | ||
| Current consumption, 2.20-2.80 V | ICC | 6.7 | mA | T_use = +105 ºC, No load, fO = 170 MHz, VCC 2.20-2.80 V (column mapped by order) | 1 | ||
| Current consumption, 2.70-3.63 V | ICC | 8.1 | mA | T_use = +105 ºC, No load, fO = 170 MHz, VCC 2.70-3.63 V (column mapped by order) | 1 | ||
| Output disable current, 1.62-1.98 V | I_dis | 3.2 | mA | OE = GND, fO = 170 MHz, VCC 1.62-1.98 V (column mapped by order) | 1 | ||
| Output disable current, 1.98-2.20 V | I_dis | 3.2 | mA | OE = GND, fO = 170 MHz, VCC 1.98-2.20 V (column mapped by order) | 1 | ||
| Output disable current, 2.20-2.80 V | I_dis | 3.3 | mA | OE = GND, fO = 170 MHz, VCC 2.20-2.80 V (column mapped by order) | 1 | ||
| Output disable current, 2.70-3.63 V | I_dis | 3.5 | mA | OE = GND, fO = 170 MHz, VCC 2.70-3.63 V (column mapped by order) | 1 | ||
| Standby current, 1.62-1.98 V | I_std | 0.9 | μA | T_use = +105 ºC, ST = GND, VCC 1.62-1.98 V (column mapped by order) | 1 | ||
| Standby current, 1.98-2.20 V | I_std | 1 | μA | T_use = +105 ºC, ST = GND, VCC 1.98-2.20 V (column mapped by order) | 1 | ||
| Standby current, 2.20-2.80 V | I_std | 1.5 | μA | T_use = +105 ºC, ST = GND, VCC 2.20-2.80 V (column mapped by order) | 1 | ||
| Standby current, 2.70-3.63 V | I_std | 2.5 | μA | T_use = +105 ºC, ST = GND, VCC 2.70-3.63 V (column mapped by order) | 1 | ||
| Symmetry | SYM | 45 | 50 | 55 | % | 50% VCC level | 1 |
| Output voltage high | VOH | 90 | % VCC | IOH/IOL per Default/Fast/Slow drive table (conditions by VCC and fO) | 1 | ||
| Output voltage low | VOL | 10 | % VCC | IOH/IOL per Default/Fast/Slow drive table (conditions by VCC and fO) | 1 | ||
| Output load capacitance | L_CMOS | 15 | pF | Output load condition | 1 | ||
| Input voltage high (OE/ST) | VIH | 70 | % VCC | OE or ST pin | 1 | ||
| Input voltage low (OE/ST) | VIL | 30 | % VCC | OE or ST pin | 1 | ||
| Rise/fall time, Default, fO > 40 MHz | tr/tf | 3 | ns | Default (grade A), fO > 40 MHz, 20%-80% VCC, L_CMOS = 15 pF | 1 | ||
| Rise/fall time, Default, fO ≤ 40 MHz | tr/tf | 6 | ns | Default (grade A), fO ≤ 40 MHz, 20%-80% VCC, L_CMOS = 15 pF | 1 | ||
| Disable time | t_stp | 1 | μs | Measured from the time OE or ST pin crosses 30% VCC | 1 | ||
| Enable time | t_sta | 1 | μs | Measured from the time OE pin crosses 70% VCC | 1 | ||
| Resume time | t_res | 3 | ms | Measured from the time ST pin crosses 70% VCC | 1 | ||
| Start-up time | t_str | 3 | ms | Measured from the time VCC reaches its rated minimum value, 1.62 V | 1 | ||
| ESD withstand, Human Body Model | 2000 | V | HBM | 6 | |||
| ESD withstand, Machine Model | 250 | V | MM | 6 | |||
| ESD withstand, Charged Device Model | 750 | V | CDM | 6 |
CAD (KiCad official)
- Symbol:
SG-8018CE 54.000000MHz TJHSA - Footprint:
Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm - 3D model: SMD3225-4P (KiCad packages3D, STEP)
- 3D model files:
sg-8018ce-54-000000mhz-tjhsa-etched.step/sg-8018ce-54-000000mhz-tjhsa-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sg-8018ce-54-000000mhz-tjhsa.step/sg-8018ce-54-000000mhz-tjhsa.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Seiko Epson datasheet (8 pp, sha256
0c2241e546fc9294, retrieved 2026-10-13, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SG-8018CE 54.000000MHz TJHSA
**Seiko Epson** · Programmable Oscillators · SMD3225-4P
SG-8018CE 54.000000MHz TJHSA from Seiko Epson, in a SMD3225-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ST | input | Standby pin, shared with OE on the OE-function variant: when Low, OUT is pulled low through a weak pull-down and the device enters standby, reducing supply current to I_std (max 2.5 μA at T_use = +105 ºC); when High, the specified frequency is output, with resume time of 3 ms max measured at 70 % VCC. |
| 2 | GND | power_in | Ground pin, which must be connected to the 0.1 μF VCC-to-GND decoupling capacitor placed close to the device. |
| 3 | OUT | output | CMOS clock output at the specified frequency when enabled (OE High or ST High), with rise/fall time set by the ordering code and a 15 pF max load (L_CMOS). |
| 4 | VCC | power_in | Power supply pin, rated 1.62 V to 3.63 V, to be bypassed with a 0.1 μF capacitor to GND placed as close to the device as possible. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Seiko Epson |
| Package | SMD3225-4P |
| Category | Crystals, Oscillators, Resonators |
| Pins | 4 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (variant T) | VCC | 1.62 | | 3.63 | V | Variant T (1.8 V ~ 3.3 V typ.); sub-ranges 1.62-1.98 / 1.98-2.20 / 2.20-2.80 / 2.70-3.63 V | 1 |
| Output frequency range | fO | 0.67 | | 170 | MHz | Output frequency range | 1 |
| Operating temperature (grade H) | T_use | -40 | | 105 | ºC | Operating temperature, grade H | 1 |
| Storage temperature | T_stg | -40 | | 125 | ºC | Storage as single product | 1 |
| Frequency tolerance (J) | f_tol | -50 | | 50 | × 10-6 | T_use = -40 ºC ~ +105 ºC; includes temperature, supply, reflow, load and aging (+25 ºC, 10 years) | 1 |
| Current consumption, 1.62-1.98 V | ICC | | | 3.2 | mA | T_use = +105 ºC, No load, fO = 20 MHz, VCC 1.62-1.98 V (column mapped by order) | 1 |
| Current consumption, 1.98-2.20 V | ICC | | | 3.3 | mA | T_use = +105 ºC, No load, fO = 20 MHz, VCC 1.98-2.20 V (column mapped by order) | 1 |
| Current consumption, 2.20-2.80 V | ICC | | | 3.4 | mA | T_use = +105 ºC, No load, fO = 20 MHz, VCC 2.20-2.80 V (column mapped by order) | 1 |
| Current consumption, 2.70-3.63 V | ICC | | | 3.5 | mA | T_use = +105 ºC, No load, fO = 20 MHz, VCC 2.70-3.63 V (column mapped by order) | 1 |
| Current consumption, 1.62-1.98 V | ICC | | | 5.5 | mA | T_use = +105 ºC, No load, fO = 170 MHz, VCC 1.62-1.98 V (column mapped by order) | 1 |
| Current consumption, 1.98-2.20 V | ICC | | | 5.8 | mA | T_use = +105 ºC, No load, fO = 170 MHz, VCC 1.98-2.20 V (column mapped by order) | 1 |
| Current consumption, 2.20-2.80 V | ICC | | | 6.7 | mA | T_use = +105 ºC, No load, fO = 170 MHz, VCC 2.20-2.80 V (column mapped by order) | 1 |
| Current consumption, 2.70-3.63 V | ICC | | | 8.1 | mA | T_use = +105 ºC, No load, fO = 170 MHz, VCC 2.70-3.63 V (column mapped by order) | 1 |
| Output disable current, 1.62-1.98 V | I_dis | | | 3.2 | mA | OE = GND, fO = 170 MHz, VCC 1.62-1.98 V (column mapped by order) | 1 |
| Output disable current, 1.98-2.20 V | I_dis | | | 3.2 | mA | OE = GND, fO = 170 MHz, VCC 1.98-2.20 V (column mapped by order) | 1 |
| Output disable current, 2.20-2.80 V | I_dis | | | 3.3 | mA | OE = GND, fO = 170 MHz, VCC 2.20-2.80 V (column mapped by order) | 1 |
| Output disable current, 2.70-3.63 V | I_dis | | | 3.5 | mA | OE = GND, fO = 170 MHz, VCC 2.70-3.63 V (column mapped by order) | 1 |
| Standby current, 1.62-1.98 V | I_std | | | 0.9 | μA | T_use = +105 ºC, ST = GND, VCC 1.62-1.98 V (column mapped by order) | 1 |
| Standby current, 1.98-2.20 V | I_std | | | 1 | μA | T_use = +105 ºC, ST = GND, VCC 1.98-2.20 V (column mapped by order) | 1 |
| Standby current, 2.20-2.80 V | I_std | | | 1.5 | μA | T_use = +105 ºC, ST = GND, VCC 2.20-2.80 V (column mapped by order) | 1 |
| Standby current, 2.70-3.63 V | I_std | | | 2.5 | μA | T_use = +105 ºC, ST = GND, VCC 2.70-3.63 V (column mapped by order) | 1 |
| Symmetry | SYM | 45 | 50 | 55 | % | 50% VCC level | 1 |
| Output voltage high | VOH | 90 | | | % VCC | IOH/IOL per Default/Fast/Slow drive table (conditions by VCC and fO) | 1 |
| Output voltage low | VOL | | | 10 | % VCC | IOH/IOL per Default/Fast/Slow drive table (conditions by VCC and fO) | 1 |
| Output load capacitance | L_CMOS | | | 15 | pF | Output load condition | 1 |
| Input voltage high (OE/ST) | VIH | 70 | | | % VCC | OE or ST pin | 1 |
| Input voltage low (OE/ST) | VIL | | | 30 | % VCC | OE or ST pin | 1 |
| Rise/fall time, Default, fO > 40 MHz | tr/tf | | | 3 | ns | Default (grade A), fO > 40 MHz, 20%-80% VCC, L_CMOS = 15 pF | 1 |
| Rise/fall time, Default, fO ≤ 40 MHz | tr/tf | | | 6 | ns | Default (grade A), fO ≤ 40 MHz, 20%-80% VCC, L_CMOS = 15 pF | 1 |
| Disable time | t_stp | | | 1 | μs | Measured from the time OE or ST pin crosses 30% VCC | 1 |
| Enable time | t_sta | | | 1 | μs | Measured from the time OE pin crosses 70% VCC | 1 |
| Resume time | t_res | | | 3 | ms | Measured from the time ST pin crosses 70% VCC | 1 |
| Start-up time | t_str | | | 3 | ms | Measured from the time VCC reaches its rated minimum value, 1.62 V | 1 |
| ESD withstand, Human Body Model | | | | 2000 | V | HBM | 6 |
| ESD withstand, Machine Model | | | | 250 | V | MM | 6 |
| ESD withstand, Charged Device Model | | | | 750 | V | CDM | 6 |
## CAD (KiCad official)
- Symbol: `SG-8018CE 54.000000MHz TJHSA`
- Footprint: `Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm`
- 3D model: SMD3225-4P (KiCad packages3D, STEP)
- 3D model files: `sg-8018ce-54-000000mhz-tjhsa-etched.step` / `sg-8018ce-54-000000mhz-tjhsa-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sg-8018ce-54-000000mhz-tjhsa.step` / `sg-8018ce-54-000000mhz-tjhsa.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Seiko Epson datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588934115395166208) (8 pp, sha256 `0c2241e546fc9294`, retrieved 2026-10-13, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sg-8018ce-54-000000mhz-tjhsa-datasheet.pdf)