main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers sec1110-a5-02nc: viewers rendered from the public page · Ray
package.json Publish 0.1.2 · Ray
page.json Publish 0.1.2 · Ray
README.md sec1110-a5-02nc: the pins were read twice by one model (sonnet); say so instead of 'cross-checked by two models' · Ray
sec1110-a5-02nc-etched.glb Publish 0.1.0 · Ray
sec1110-a5-02nc-etched.step sec1110-a5-02nc: factory component page (tier=mfr) · Ray
sec1110-a5-02nc-hero.glb sec1110-a5-02nc: hero GLB from the etched model (keeps the MPN mark) · Ray
sec1110-a5-02nc-hero.overlay.json Publish 0.1.0 · Ray
sec1110-a5-02nc.glb Publish 0.1.0 · Ray
sec1110-a5-02nc.kicad_mod Publish 0.1.0 · Ray
sec1110-a5-02nc.kicad_sym Publish 0.1.0 · Ray
sec1110-a5-02nc.lbr Publish 0.1.0 · Ray
sec1110-a5-02nc.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 17 pins · Ray

SEC1110-A5-02NC

Microchip Tech · Interface - Specialized · QFN-16-EP(5x5)

SEC1110-A5-02NC from Microchip Tech, in a QFN-16-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, read twice and the reads agreed); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD5 power_in 5.0V (or VBUS) power input; supply range is 3.6V to 5.5V.
2 SC1_C8 bidirectional Smart Card 1 C8 contact (SC1_SPU) for standard or proprietary use as input and/or output, alternatively GPIO4; high-impedance at reset.
3 SC1_C4 bidirectional Attaches to C4 of the Smart Card for cards that support Function Code (SC1_FCB), alternatively GPIO3; high-impedance at reset.
4 SC1_IO bidirectional Smart Card 1 bidirectional serial data pin, held low when the interface is inactive, alternatively GPIO0.
5 SC1_CLK output Smart Card 1 clock reference output, held low when the interface is inactive, alternatively GPIO1.
6 SC1_RST_N output Smart Card 1 reset output; a low pulse resets the card and triggers an ATR response, held low when the interface is inactive, alternatively GPIO2.
7 SC1_VCC power_out Smart Card 1 supply output programmable to 1.8, 3.0 or 5.0 V by card type, requires an external 1 µF capacitor and is powered down at reset.
8 SC1_PRSNT_N/JTAG_TMS bidirectional Active-low Smart Card 1 presence detect (software-enabled internal pull-up), alternatively JTAG_TMS in debug mode, Timer 0 input or GPIO6.
9 TEST bidirectional Chip test-mode pin with weak internal pull-down; must be tied low externally if the test function is not used.
10 USB_DM bidirectional Connects to the upstream USB D- bus data signal, with integrated series resistor.
11 USB_DP bidirectional Connects to the upstream USB D+ bus data signal, with integrated 1.5 K pull-up and series resistor.
12 VDD33 power_out 3.3V internal regulator output for USB and GPIO supply, requires an external 1 µF capacitor.
13 JTAG_CLK bidirectional JTAG debug clock input with weak pull-down; can be left floating or grounded when not used.
14 SC_LED_ACT_N/JTAG_TDO bidirectional Driver for the Smart Card active LED, alternatively JTAG_TDO in debug mode, Timer 2 T2EX input or GPIO5.
15 JTAG_TDI bidirectional JTAG data-in pin with weak pull-down; its value at reset release is captured to select functional or test modes.
16 RESET_N input Active-low analog reset input (Vil=100 mV) that resets the chip and enters STOP mode; pulse must be at least 1 µs wide.
17 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package QFN-16-EP(5x5)
Category Communication Interface Chip/UART/485/232
Pins 17

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Storage Temperature TSTOR -55 150 °C 188
VDD5 supply voltage VDD5 -0.3 5.5 V 188
Voltage on USB_DP and USB_DM pins -0.3 3.6 V 3.3 V 10%. 188
Voltage on RESET_N 0 V Max VDD5 (Note 18-3) 188
Voltage on any signal pin -0.3 5.5 V Positive voltage on any signal pin, with respect to Ground 5.5V 188
Operating Temperature TA 0 70 °C Commercial (blank suffix); Note 18-1 0°C commercial, Note 18-2 +70°C commercial 189
5.0V supply voltage VDD5 3.6 5.5 V TA = 0°C - 70°C 189
VDD5 supply rise time tRT 400 ns Figure 18-1 189
Voltage on USB_DP and USB_DM pins 3 3.6 V If VDD5 drops below 3.6V, then the MAX becomes VDD5 189
Voltage on RESET_N 0 V Max VDD5 (Note 18-3) 189
Voltage on any signal pin -0.3 5.5 V Other than USB_DP, USB_DM, Smart Card pins, RESET_N 189
Low Output Level VOL 0.4 V IOL = -8 mA 189
8 mA I/O sinking current IOL8 8.3 12.6 18.4 mA VOUT = 0.4V 189
8 mA I/O sinking output impedance ROL8 21.7 31.6 48.3 VOUT = 0.4V 189
8 mA I/O sourcing current IOH8 8.1 11.6 16 mA VOUT = VDD33 - 0.4V 189
8 mA I/O sourcing output impedance ROH8 25 34.6 50 VOUT = VDD33 - 0.4V 189
Output Leakage IIH5 1 µA VIN= 0 to VDD33, 27°C 189
Output Leakage IIH5 20 µA VIN = 0 to 5.5V, 85°C 189
Output Leakage IIH5 80 µA VIN=0 to 5.5V, 125°C 189
Low Input Level VIL -0.3 0.8 V 189
High Input Level VIH5 2 5.5 V 189
Hysteresis VHYSI 336 399 459 mV 189
Pull-Down RDPD 46 65 90 k Vpad = VDD33 189
Pull-Down current IDPD 33 50 79 µA Vpad = VDD33 189
Pull-Up RDPU 53 66 80 k Vpad = 0V 189
Pull-Up current IDPU 38 50 68 µA Vpad = 0V 189
Oscillator 48 MHz accuracy with USB Dynamic Trim enabled F48acc 0.1 0.2 % -40 < T < 125 °C, 3.6 < VDD5 < 6.8V, internal oscillator @ 48 MHz 190
Oscillator 48 MHz accuracy without USB Dynamic Trim F48accd 0.82 1.5 % -40 < T < 125 °C, 3.6 < VDD5 < 6.8V, internal oscillator @ 48 MHz 190
Oscillator 8 MHz accuracy F8acc 0.78 1.83 % Internal oscillator @ 8 MHz 190
Oscillator 4 MHz accuracy F4acc 0.78 1.83 % Internal oscillator @ 4 MHz 190
Smart Card Power Supply Voltage (Class A) VSC1_VCC, VSC2_VCC 4.6 V Class A mode, ISC1_VCC = 0 to 55 mA; max min((VDD5-0.285), 5.25) 190
Smart Card Power Supply Voltage (Class B) VSC1_VCC, VSC2_VCC 2.76 3 3.24 V Class B mode 190
Smart Card Power Supply Voltage (Class C) VSC1_VCC, VSC2_VCC 1.66 1.8 1.94 V Class C mode 190
Smart Card Power Supply current ISC1, ISC2 55 mA Class A/B/C 190
Smart Card Over Current Sense (OCS) Detection IOCS1, IOCS2 110 mA 190
Detection Time on OCS tOSCDET 1 µs 190
SC1_VCC/SC2_VCC Turn Off Time tSCOFF 5 ms SEC1110/SEC1210 A1 version; Note 18-14 190
SC1_VCC/SC2_VCC Turn Off Time tSCOFF 500 µs All later versions; Note 18-14 190
SC1_VCC/SC2_VCC Turn On Time tSCON 1 ms 1.0 µF load; Note 18-14 190
SC1_CLK, SC2_CLK Low Output Level (Class A) VOL 0 0.4 V At VSC1_VCC/VSC2_VCC=min, CL=30pF; Class A 191
SC1_CLK, SC2_CLK Low Output Level (Class B) VOL 0 0.4 V At VSC1_VCC/VSC2_VCC=min, CL=30pF; Class B 191
SC1_CLK, SC2_CLK Rise Time tR 9.9 13 16.67 ns @ CL = 30 pF, Rload=33; Class A/B/C 191
SC1_CLK, SC2_CLK Fall Time tF 6.5 10 16.2 ns @ CL = 30 pF, Rload=33; Class A/B/C 191
SC1_CLK, SC2_CLK Clock Accuracy (USB Dynamic Trimming on) 0.1 0.25 % USB Dynamic Trimming is on 191
SC1_CLK, SC2_CLK Clock Accuracy (USB Dynamic trim off) 0.82 1.5 % USB Dynamic trim is off. Same as F48accd 191
SC1_CLK, SC2_CLK Clock Duty Cycle 48 52 % Oscillator in 48 MHz mode. 191
SC1_CLK, SC2_CLK Frequency FSCx_CLK 1 4.8 MHz Generated by dividing 48 MHz by an integer ranging from 10 to 48. 191

CAD (KiCad official)

  • Symbol: SEC1110-A5-02NC
  • Footprint: Package_DFN_QFN:QFN-16-1EP_5x5mm_P0.8mm_EP2.7x2.7mm
  • 3D model: QFN-16-EP(5x5) (KiCad packages3D, STEP)
  • 3D model files: sec1110-a5-02nc-etched.step / sec1110-a5-02nc-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sec1110-a5-02nc.step / sec1110-a5-02nc.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (220 pp, sha256 3d50372dd19b6208, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF