main
Ray Publish 0.1.1 949e95f
{
  "schema_version": 1,
  "type": "component",
  "slug": "se9017-hf",
  "title": "SE9017-HF",
  "brief": "Seaward Elec Battery Management, SOT-23-6. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.1",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "pmic",
    "se9017-hf"
  ],
  "component": {
    "mpn": "SE9017-HF",
    "manufacturer": "Seaward Elec",
    "package": "SOT-23-6",
    "pin_count": 6,
    "category": "PMIC",
    "subcategory": "Battery Management",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/ba09eb600d4a5b591002a1636854880d.pdf",
    "parts": {
      "symbol": "se9017-hf.kicad_sym",
      "footprint": "se9017-hf.kicad_mod",
      "model_3d": "se9017-hf-hero.glb",
      "model_3d_plain": "se9017-hf.glb",
      "model_3d_step": "se9017-hf-etched.step",
      "model_3d_step_plain": "se9017-hf.step",
      "lbr": "se9017-hf.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "CHRG",
        "type": "output",
        "description": "Open-drain charge status output. Pulled low by an internal N-channel MOSFET (~10mA sink capability) while a charge cycle is active; goes Hi-Z when charging completes. Typically drives an LED to ground through a series resistor."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground reference and primary thermal path. Should tie to a wide copper plane to spread heat generated by the internal pass MOSFET."
      },
      {
        "number": "3",
        "name": "BAT",
        "type": "power_out",
        "description": "Charge current output to the single-cell Li-Ion/Li-Polymer battery. Regulates the final float voltage to 4.21V ±1% and can deliver up to 800mA. Absolute maximum 5.5V; withstands continuous short-circuit to GND."
      },
      {
        "number": "4",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive input supply from wall adapter or USB port. Operating range 3.5V to 6V (recommended 4.5-6V), 7V absolute max. Bypass with at least a 1µF capacitor to GND (add ~1.5Ω series resistor if using low-ESR ceramic to damp start-up transients)."
      },
      {
        "number": "5",
        "name": "CHRGT",
        "type": "output",
        "description": "Open-drain charge-termination status output. High-impedance while charging (pulled high externally, e.g. through an LED to VCC); pulled low by an internal N-channel MOSFET after the charge cycle terminates, providing an end-of-charge indicator."
      },
      {
        "number": "6",
        "name": "PROG",
        "type": "bidirectional",
        "description": "Charge-current program, charge-current monitor and shutdown pin. Connect a resistor RPROG to GND; charge current IBAT = 1060 · VPROG / RPROG (VPROG ≈ 1.0V typ), so RPROG = 2kΩ → ~530mA, 10kΩ → ~106mA. Floating the pin (or pulling above ~1.25V) forces the chip into shutdown; the pin voltage can also be sensed to monitor instantaneous charge current. Absolute max VCC+0.3V."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/ba09eb600d4a5b591002a1636854880d.pdf",
        "pages": 10,
        "sha256": "473055e34d4959ae",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 6,
        "described": 6,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "se9017-hf.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "c9fe686b4d1b56927a41fa84a9bc1efb61d8a45a123a3db43bcaa05c2891d635",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "se9017-hf-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "49f169ea1a58da7c2f31d40a6f5573782b2a3c8f78b4fe2b6d66127be276bc0f",
        "checked": "2026-10-26",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Seaward Elec",
      "Package": "SOT-23-6",
      "Category": "PMIC",
      "Pins": "6"
    }
  },
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "se9017-hf"
  ],
  "discovery_pitch": "SE9017-HF (Seaward Elec) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "se9017-hf.kicad_sym",
    "se9017-hf.kicad_mod",
    "se9017-hf.glb",
    "se9017-hf.step",
    "se9017-hf.lbr",
    "docs/hero.png",
    "docs/se9017-hf-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "se9017-hf-etched.step",
    "se9017-hf-hero.glb",
    "se9017-hf-hero.overlay.json"
  ],
  "visibility": "public",
  "updated_at": "2026-09-25T05:43:00.764Z",
  "description": "Seaward Elec Battery Management, SOT-23-6. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "org": "adom"
}