component
SE8530X2-HF
Public Made by Adomby adom
Seaward Elec Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 16d ago |
| viewers | 16d ago |
| package.json | 16d ago |
| page.json | 16d ago |
| README.md | 16d ago |
| se8530x2-hf-etched.glb | 16d ago |
| se8530x2-hf-etched.step | 16d ago |
| se8530x2-hf-hero.glb | 16d ago |
| se8530x2-hf-hero.overlay.json | 16d ago |
| se8530x2-hf.glb | 16d ago |
| se8530x2-hf.kicad_mod | 16d ago |
| se8530x2-hf.kicad_sym | 16d ago |
| se8530x2-hf.lbr | 16d ago |
| se8530x2-hf.step | 16d ago |
SE8530X2-HF
Seaward Elec · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23
SE8530X2-HF from Seaward Elec, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin of the regulator (pin 1 on SOT23-3). |
| 2 | VOUT | power_out | Regulated output voltage; a 1μF minimum (10μF recommended) ceramic output capacitor is required close to the pin, and VOUT is rated 6V absolute maximum. |
| 3 | VIN | power_in | Power supply input operating from VOUT+1V up to 35V (40V absolute maximum), requiring a 1μF ceramic capacitor to GND placed close to the pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Seaward Elec |
| Package | SOT-23 |
| Category | Power Management (PMIC) |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Supply Voltage | VIN | 1.8 | 36 | V | 5 | ||
| Output Voltage Accuracy | VOUT | -1 | 1 | % | IOUT=10mA | 5 | |
| Output Voltage Accuracy | VOUT | -2 | 2 | % | 5 | ||
| Enable High Level | VENH | 1 | V | Enabled | 5 | ||
| Enable Low Level | VENL | 0.4 | V | Disabled | 5 | ||
| Output Voltage Temperature Coefficient | TCVOUT | -100 | 100 | ppm/℃ | IOUT=10mA; -40℃≤TAMB≤100℃ | 5 | |
| Quiescent Current | IQ | 2.5 | 6 | μA | 5 | ||
| Output Current | IOUT | 200 | mA | 5 | |||
| Load Regulation | VLR | 40 | mV | 1mA ≤ IOUT≤ 100mA | 5 | ||
| Line Regulation | VSR | 0.02 | %/V | IOUT=1mA, VIN=(VOUT +1V) to 30V | 5 | ||
| EN Current | IEN | 1 | μA | EN=0~VIN(REN=100K) | 5 | ||
| Current Limit | ILIMIT | 450 | mA | VIN=(VOUT +1V) to 30V; RLOAD=VOUT /1A | 5 | ||
| Thermal Protection | TSHDN | 150 | ℃ | 5 | |||
| Dropout Voltage | VDROP | 30 | mV | IOUT=10mA; ∆VOUT= - VOUT *2% | 5 | ||
| Dropout Voltage | VDROP | 300 | mV | IOUT=100mA; ∆VOUT= - VOUT *2% | 5 | ||
| Dropout Voltage | VDROP | 600 | mV | IOUT=200mA; ∆VOUT= - VOUT *2% | 5 | ||
| Power Supply Rejection Ratio | PSRR | 80 | dB | Vin=12V, Iout=10mA, F=1Khz, Vout=3.3V | 5 | ||
| Input Supply Voltage (absolute maximum) | VIN | 40 | V | 3 | |||
| Output Voltage (absolute maximum) | VOUT | 6 | V | 3 | |||
| Operating Temperature (absolute maximum) | TA | -40 | 105 | °C | 3 | ||
| Storage Temperature (absolute maximum) | TSTG | -40 | 150 | °C | 3 | ||
| Maximum Junction Temperature | TJ | 150 | °C | 3 | |||
| Lead Temperature (Soldering) | TLEAD | 260 | °C | 10 seconds | 3 | ||
| Thermal Resistance, Junction-to-Ambient (SOT23) | θJA | 280 | ℃/W | SOT23 | 3 | ||
| Power Consumption (SOT23) | PD | 250 | mW | SOT23 | 3 | ||
| Electrostatic discharge, Human Body Model | HBM | 4 | kV | Human Body Model (HBM) | 3 | ||
| Electrostatic discharge, Charged Device Model | CDM | 100 | V | Charged Device Model (MM) as printed | 3 | ||
| Operating Temperature | TA | -20 | 85 | ℃ | 4 | ||
| Storage Temperature | TSTG | -40 | 125 | ℃ | 4 | ||
| Lead Temperature (Soldering) | TLEAD | 260 | ℃ | 10 seconds; printed as 260±5 | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | placed as close as possible to VIN pin, and the wide copper trace is also recommended. | 8 |
CAD (KiCad official)
- Symbol:
SE8530X2-HF - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23 (KiCad packages3D, STEP)
- 3D model files:
se8530x2-hf-etched.step/se8530x2-hf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);se8530x2-hf.step/se8530x2-hf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Seaward Elec datasheet (10 pp, sha256
0cbe3738392b321a, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).