main
Ray
se8117t50hf: specified limits as data (metadata.characteristics, 17 rows from the datasheet)
244b3a4
SE8117T50HF
Seaward Elec · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223
SE8117T50HF from Seaward Elec, in a SOT-223. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground return. On fixed-voltage variants (SE8117T50) this pin is ground only; on the adjustable SE8117TA variant the same pin serves as ADJ, taking a resistor divider from VOUT to set the output voltage. |
| 2 | OUT | power_out | Regulated 5.0V output (nominal 4.900V-5.100V). A minimum 4.7µF capacitor (0.15Ω ≤ ESR ≤ 0.5Ω) should be connected from this pin to ground for stability; 22µF is recommended for improved transient and PSRR performance. The SOT-223 tab is internally connected to this pin. |
| 3 | IN | power_in | Regulator input supply. Must be at least 1.3V (typ. dropout 1.2V @ 0.5A) higher than VOUT for proper regulation; absolute maximum 18V. A minimum 4.7µF capacitor (0.15Ω ≤ ESR ≤ 0.5Ω) is recommended between this pin and ground to prevent input sag during load transients. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Seaward Elec |
| Package | SOT-223 |
| Category | PMIC |
| Pins | 3 |
Ordering variants
Same part, different packaging or reel option.
SE8117T50-HF-5.0VSE8117J33-LF-3.3V
Related parts (NOT interchangeable)
The extractor listed these alongside SE8117T50HF, but they are different parts with different electrical characteristics. Do not order them as substitutes.
SE8117JA-LF-ADJ
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage (SE8117T-50) | VO | 4.9 | 5 | 5.1 | V | 3 | |
| Dropout Voltage | VD | 1.2 | 1.25 | V | IOUT = 0.5A | 3 | |
| Quiescent Current, Fixed Output Version | IQ | 2.7 | 5 | mA | 3 | ||
| Adjust Pin Current (GND Current) | IADJ (IGND) | 50 | 120 | μA | 3 | ||
| Adjust Pin Current Change | ∆IADJ | 0.2 | 5 | μA | VOUT + 1.5V < VIN < 9V | 3 | |
| Minimum Load Current | IO | 0.4 | 5 | mA | 3 | ||
| Current Limit | ICL | 1 | 1.35 | A | 3 | ||
| Input Supply Voltage | VIN | 18 | V | 2 | |||
| Operating Junction Temperature Range | TJ | -40 | 125 | °C | 2 | ||
| Storage Temperature Range | TSTG | -40 | 150 | °C | 2 | ||
| Lead Temperature (Soldering 10 Sec) | TLEAD | 260 | °C | 10 Sec soldering | 2 | ||
| Maximum Junction Temperature | TMJ | 150 | °C | 2 | |||
| Thermal Resistance Junction to Ambient (SOT-223) | θJA | 120 | °C/W | SOT-223 package | 2 | ||
| Output Capacitor (OUT pin) minimum | 4.7 | µF | Required from OUT to ground for stability | 1 | |||
| Output Capacitor ESR | 0.15 | 0.5 | Ω | Required for OUT capacitor stability | 1 | ||
| Input Capacitor (IN pin) minimum | 4.7 | µF | Required from IN to ground for stability | 1 | |||
| Input Capacitor ESR | 0.15 | 0.5 | Ω | Required for IN capacitor stability | 1 |
CAD (KiCad official)
- Symbol:
SE8117T50HF - Footprint:
Package_TO_SOT_SMD:SOT-223-3_TabPin2 - 3D model: SOT-223 (KiCad packages3D, STEP)
- 3D model files:
se8117t50hf-etched.step/se8117t50hf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);se8117t50hf.step/se8117t50hf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Seaward Elec datasheet (9 pp, sha256
23ae86778a865694, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SE8117T50HF
**Seaward Elec** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223
SE8117T50HF from Seaward Elec, in a SOT-223. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground return. On fixed-voltage variants (SE8117T50) this pin is ground only; on the adjustable SE8117TA variant the same pin serves as ADJ, taking a resistor divider from VOUT to set the output voltage. |
| 2 | OUT | power_out | Regulated 5.0V output (nominal 4.900V-5.100V). A minimum 4.7µF capacitor (0.15Ω ≤ ESR ≤ 0.5Ω) should be connected from this pin to ground for stability; 22µF is recommended for improved transient and PSRR performance. The SOT-223 tab is internally connected to this pin. |
| 3 | IN | power_in | Regulator input supply. Must be at least 1.3V (typ. dropout 1.2V @ 0.5A) higher than VOUT for proper regulation; absolute maximum 18V. A minimum 4.7µF capacitor (0.15Ω ≤ ESR ≤ 0.5Ω) is recommended between this pin and ground to prevent input sag during load transients. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Seaward Elec |
| Package | SOT-223 |
| Category | PMIC |
| Pins | 3 |
## Ordering variants
Same part, different packaging or reel option.
- `SE8117T50-HF-5.0V`
- `SE8117J33-LF-3.3V`
## Related parts (NOT interchangeable)
The extractor listed these alongside SE8117T50HF, but they are **different parts** with different electrical characteristics. Do not order them as substitutes.
- `SE8117JA-LF-ADJ`
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage (SE8117T-50) | VO | 4.9 | 5 | 5.1 | V | | 3 |
| Dropout Voltage | VD | | 1.2 | 1.25 | V | IOUT = 0.5A | 3 |
| Quiescent Current, Fixed Output Version | IQ | | 2.7 | 5 | mA | | 3 |
| Adjust Pin Current (GND Current) | IADJ (IGND) | | 50 | 120 | μA | | 3 |
| Adjust Pin Current Change | ∆IADJ | | 0.2 | 5 | μA | VOUT + 1.5V < VIN < 9V | 3 |
| Minimum Load Current | IO | | 0.4 | 5 | mA | | 3 |
| Current Limit | ICL | 1 | 1.35 | | A | | 3 |
| Input Supply Voltage | VIN | | | 18 | V | | 2 |
| Operating Junction Temperature Range | TJ | -40 | | 125 | °C | | 2 |
| Storage Temperature Range | TSTG | -40 | | 150 | °C | | 2 |
| Lead Temperature (Soldering 10 Sec) | TLEAD | | | 260 | °C | 10 Sec soldering | 2 |
| Maximum Junction Temperature | TMJ | | | 150 | °C | | 2 |
| Thermal Resistance Junction to Ambient (SOT-223) | θJA | | | 120 | °C/W | SOT-223 package | 2 |
| Output Capacitor (OUT pin) minimum | | 4.7 | | | µF | Required from OUT to ground for stability | 1 |
| Output Capacitor ESR | | 0.15 | | 0.5 | Ω | Required for OUT capacitor stability | 1 |
| Input Capacitor (IN pin) minimum | | 4.7 | | | µF | Required from IN to ground for stability | 1 |
| Input Capacitor ESR | | 0.15 | | 0.5 | Ω | Required for IN capacitor stability | 1 |
## CAD (KiCad official)
- Symbol: `SE8117T50HF`
- Footprint: `Package_TO_SOT_SMD:SOT-223-3_TabPin2`
- 3D model: SOT-223 (KiCad packages3D, STEP)
- 3D model files: `se8117t50hf-etched.step` / `se8117t50hf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `se8117t50hf.step` / `se8117t50hf.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Seaward Elec datasheet](docs/se8117t50hf-datasheet.pdf) (9 pp, sha256 `23ae86778a865694`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/se8117t50hf-datasheet.pdf)