main
Ray
Publish 0.1.7
fb19522
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234
{
"slug": "se8117t33hf",
"version": "0.1.7",
"type": "component",
"description": "Seaward Elec Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223-3. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
"tags": [
"component",
"pmic",
"se8117t33hf"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"se8117t33hf.kicad_sym",
"se8117t33hf.kicad_mod",
"se8117t33hf.glb",
"se8117t33hf.step",
"se8117t33hf.lbr",
"docs/hero.png",
"docs/se8117t33hf-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"se8117t33hf-etched.step",
"se8117t33hf-etched.glb",
"se8117t33hf-hero.glb",
"se8117t33hf-hero.overlay.json"
],
"metadata": {
"characteristics": {
"version": 1,
"source": "datasheet",
"rows": [
{
"name": "Input voltage",
"symbol": "VIN",
"kind": "absolute_maximum",
"unit": "V",
"min": null,
"typ": null,
"max": 18,
"conditions": "Input Supply Voltage (Absolute Maximum Rating)",
"source_page": 2,
"source": "datasheet"
},
{
"name": "Output current",
"symbol": "IOUT",
"kind": "recommended_operating",
"unit": "A",
"min": null,
"typ": null,
"max": 1,
"conditions": "Guaranteed 1A Output Current",
"source_page": 1,
"source": "datasheet"
},
{
"kind": "recommended_operating",
"name": "Output capacitor ESR",
"symbol": "ESR",
"min": 0.15,
"typ": null,
"max": 0.5,
"unit": "ohm",
"conditions": "p.1 pin table: 0.15 ohm <= ESR <= 0.5 ohm on both the input and output capacitor",
"source_page": 1,
"source": "datasheet"
},
{
"kind": "recommended_operating",
"name": "Input capacitance",
"symbol": "CIN",
"min": 4.7,
"typ": null,
"max": null,
"unit": "uF",
"conditions": "stated minimum: \"A minimum of 4.7uF capacitor (0.15 ohm <= ESR <= 0.5 ohm) must be connected from this pin to ground to insure stability\" (p.1 pin table); p.1 also says \"Stable operation without Cin and Cout\"",
"source_page": 1,
"source": "datasheet"
},
{
"kind": "recommended_operating",
"name": "Input capacitance (recommended)",
"symbol": "CIN",
"min": null,
"typ": 10,
"max": null,
"unit": "uF",
"conditions": "recommended: \"An input capacitor of 10uF is recommended. Ceramic or Tantalum can be used.\" (p.5); electrical characteristics measured at CIN=10uF (p.3)",
"source_page": 5,
"source": "datasheet"
},
{
"kind": "recommended_operating",
"name": "Output capacitance",
"symbol": "COUT",
"min": 4.7,
"typ": null,
"max": null,
"unit": "uF",
"conditions": "stated minimum: \"A minimum of 4.7uF capacitor (0.15 ohm <= ESR <= 0.5 ohm) must be connected\" (p.1 pin table)",
"source_page": 1,
"source": "datasheet"
},
{
"kind": "recommended_operating",
"name": "Output capacitance (recommended)",
"symbol": "COUT",
"min": null,
"typ": 22,
"max": null,
"unit": "uF",
"conditions": "recommended: \"An output capacitor of 22uF is recommended\" (p.5); electrical characteristics measured at COUT=22uF (p.3, ripple rejection at 22uF tantalum)",
"source_page": 5,
"source": "datasheet"
}
]
}
},
"component": {
"mpn": "SE8117T33HF",
"manufacturer": "Seaward Elec",
"package": "SOT-223-3",
"pin_count": 3,
"category": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",
"parts": {
"symbol": "se8117t33hf.kicad_sym",
"footprint": "se8117t33hf.kicad_mod",
"model_3d": "se8117t33hf-hero.glb",
"model_3d_plain": "se8117t33hf.glb",
"model_3d_step": "se8117t33hf-etched.step",
"model_3d_step_plain": "se8117t33hf.step",
"lbr": "se8117t33hf.lbr"
},
"pins": [
{
"number": "1",
"name": "GND",
"type": "power_in",
"description": "Ground reference for the fixed-output regulator. On the adjustable SE8117TA variant this pin becomes ADJ (a resistor divider from OUT to this pin and to ground sets VOUT); for the fixed 3.3V SE8117T33 this pin is tied to ground."
},
{
"number": "2",
"name": "OUT",
"type": "power_out",
"description": "Regulated 3.3V output of the LDO (guaranteed 1A). A minimum 4.7µF capacitor (0.15Ω ≤ ESR ≤ 0.5Ω), typically 22µF, must be connected from this pin to ground to ensure stability and improve transient/PSRR performance. Also connected to the exposed tab (Tab is Vout)."
},
{
"number": "3",
"name": "IN",
"type": "power_in",
"description": "Input supply pin (absolute max 18V). Must be at least 1.3V higher than VOUT for proper regulation. A minimum 4.7µF capacitor (0.15Ω ≤ ESR ≤ 0.5Ω), typically 10µF ceramic or tantalum, must be connected from this pin to ground to ensure stability."
}
],
"provenance": {
"rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction",
"cad": "KiCad official (CC-BY-SA 4.0)",
"cad_basis": {
"from": [
"README CAD section (factory cad_wording)",
".kicad_mod model path agrees"
],
"missing": []
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"distributor_links": {
"lcsc": "C2847492",
"digikey": false,
"mouser": false
},
"distributor_check": {
"checked_at": "2026-10-05T19:16:20Z",
"source": "Component Ocean /api/assign-pns + lcsc_map",
"digikey": {
"pn": null,
"status": "no match"
},
"mouser": {
"pn": null,
"status": "no match"
}
},
"models_3d": [
{
"file": "se8117t33hf.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
7,
6.5,
1.7
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "77ad6dbacc493cb619c728f26d2ddcf461eb0feb6b977b47d01d51e67016f654",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "se8117t33hf-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
7,
6.5,
1.7
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "662df7612054d2120f07c095919c5fd63f3c627bd0d6df069bb2b15edb21e221",
"checked": "2026-10-16",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"visibility": "public"
}