main
Ray
se8117t33hf: laser-etched CAD + chip hero (factory 2.0.0 backfill)
d470c58
SE8117T33HF
Seaward Elec · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223-3
SE8117T33HF from Seaward Elec, in a SOT-223-3. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference for the fixed-output regulator. On the adjustable SE8117TA variant this pin becomes ADJ (a resistor divider from OUT to this pin and to ground sets VOUT); for the fixed 3.3V SE8117T33 this pin is tied to ground. |
| 2 | OUT | power_out | Regulated 3.3V output of the LDO (guaranteed 1A). A minimum 4.7µF capacitor (0.15Ω ≤ ESR ≤ 0.5Ω), typically 22µF, must be connected from this pin to ground to ensure stability and improve transient/PSRR performance. Also connected to the exposed tab (Tab is Vout). |
| 3 | IN | power_in | Input supply pin (absolute max 18V). Must be at least 1.3V higher than VOUT for proper regulation. A minimum 4.7µF capacitor (0.15Ω ≤ ESR ≤ 0.5Ω), typically 10µF ceramic or tantalum, must be connected from this pin to ground to ensure stability. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Seaward Elec |
| Package | SOT-223-3 |
| Category | PMIC |
| Pins | 3 |
Ordering variants
SE8117T33HFSE8117T33-HF-3.3VSE8117T33HFSE8117T15-HF-1.5VSE8117T33HFSE8117T18-HF-1.8VSE8117T33HFSE8117T25-HF-2.5VSE8117T33HFSE8117T50-HF-5.0VSE8117T33HFSE8117TA-HF-ADJSE8117T33HFSE8117J33-LF-3.3VSE8117T33HFSE8117JA-LF-ADJ
CAD (KiCad official)
- Symbol:
SE8117T33HF - Footprint:
Package_TO_SOT_SMD:SOT-223-3_TabPin2 - 3D model: SOT-223-3 (KiCad packages3D, STEP)
- 3D model files:
se8117t33hf-etched.step/se8117t33hf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);se8117t33hf.step/se8117t33hf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Seaward Elec datasheet (None pp, sha256
23ae86778a865694, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SE8117T33HF
**Seaward Elec** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223-3
SE8117T33HF from Seaward Elec, in a SOT-223-3. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference for the fixed-output regulator. On the adjustable SE8117TA variant this pin becomes ADJ (a resistor divider from OUT to this pin and to ground sets VOUT); for the fixed 3.3V SE8117T33 this pin is tied to ground. |
| 2 | OUT | power_out | Regulated 3.3V output of the LDO (guaranteed 1A). A minimum 4.7µF capacitor (0.15Ω ≤ ESR ≤ 0.5Ω), typically 22µF, must be connected from this pin to ground to ensure stability and improve transient/PSRR performance. Also connected to the exposed tab (Tab is Vout). |
| 3 | IN | power_in | Input supply pin (absolute max 18V). Must be at least 1.3V higher than VOUT for proper regulation. A minimum 4.7µF capacitor (0.15Ω ≤ ESR ≤ 0.5Ω), typically 10µF ceramic or tantalum, must be connected from this pin to ground to ensure stability. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Seaward Elec |
| Package | SOT-223-3 |
| Category | PMIC |
| Pins | 3 |
## Ordering variants
- `SE8117T33HFSE8117T33-HF-3.3V`
- `SE8117T33HFSE8117T15-HF-1.5V`
- `SE8117T33HFSE8117T18-HF-1.8V`
- `SE8117T33HFSE8117T25-HF-2.5V`
- `SE8117T33HFSE8117T50-HF-5.0V`
- `SE8117T33HFSE8117TA-HF-ADJ`
- `SE8117T33HFSE8117J33-LF-3.3V`
- `SE8117T33HFSE8117JA-LF-ADJ`
## CAD (KiCad official)
- Symbol: `SE8117T33HF`
- Footprint: `Package_TO_SOT_SMD:SOT-223-3_TabPin2`
- 3D model: SOT-223-3 (KiCad packages3D, STEP)
- 3D model files: `se8117t33hf-etched.step` / `se8117t33hf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `se8117t33hf.step` / `se8117t33hf.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Seaward Elec datasheet](docs/se8117t33hf-datasheet.pdf) (None pp, sha256 `23ae86778a865694`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/se8117t33hf-datasheet.pdf)