main
Ray Publish 0.1.2 0f77766
{
  "slug": "se555dr",
  "version": "0.1.2",
  "type": "component",
  "description": "Texas Instruments Timers / Clock Oscillators, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "rtc",
    "se555dr"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "se555dr.kicad_sym",
    "se555dr.kicad_mod",
    "se555dr.glb",
    "se555dr.step",
    "se555dr.lbr",
    "docs/hero.png",
    "docs/se555dr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "se555dr-etched.step",
    "se555dr-etched.glb",
    "se555dr-hero.glb",
    "se555dr-hero.overlay.json"
  ],
  "visibility": "public",
  "author": {
    "name": "Ray"
  },
  "component": {
    "mpn": "SE555DR",
    "manufacturer": "Texas Instruments",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Timers / Clock Oscillators",
    "datasheet": "https://www.ti.com/lit/ds/symlink/se555.pdf",
    "parts": {
      "symbol": "se555dr.kicad_sym",
      "footprint": "se555dr.kicad_mod",
      "model_3d": "se555dr-hero.glb",
      "model_3d_plain": "se555dr.glb",
      "model_3d_step": "se555dr-etched.step",
      "model_3d_step_plain": "se555dr.step",
      "lbr": "se555dr.lbr"
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference (0 V). Return for all supply and signal currents."
      },
      {
        "number": "2",
        "name": "TRIG",
        "type": "input",
        "description": "Trigger input. A negative-going pulse below VCC/3 (1/3 VCC) sets the internal flip-flop and drives the output HIGH. Typical trigger threshold ~1.67 V at VCC=5 V, ~5 V at VCC=15 V."
      },
      {
        "number": "3",
        "name": "OUT",
        "type": "output",
        "description": "Push-pull output. Can source or sink up to 200 mA. Output HIGH is approximately VCC - 1.7 V (typ) at 100 mA sink; output LOW is ~0.1 V at 5 mA sink."
      },
      {
        "number": "4",
        "name": "RESET",
        "type": "input",
        "description": "Active-low reset input. Forces the output LOW and discharge transistor ON regardless of other inputs when pulled below ~0.7 V. Tie to VCC if unused. Reset current typ 0.1 mA."
      },
      {
        "number": "5",
        "name": "CONT",
        "type": "input",
        "description": "Control voltage input. Directly accesses the 2/3 VCC reference of the upper comparator, allowing external modulation of timing thresholds. Bypass to GND with 0.01 µF when unused. Nominal voltage 2/3 VCC (~3.33 V at 5 V, ~10 V at 15 V)."
      },
      {
        "number": "6",
        "name": "THRES",
        "type": "input",
        "description": "Threshold input. When the voltage on THRES rises above 2/3 VCC, the internal flip-flop resets, driving the output LOW and turning on the discharge transistor. Typical threshold ~3.33 V at VCC=5 V, ~10 V at VCC=15 V."
      },
      {
        "number": "7",
        "name": "DISCH",
        "type": "output",
        "description": "Discharge output (open-collector NPN to GND). Provides a discharge path for the external timing capacitor when the output is LOW. Sinks the timing-capacitor current to GND; not driven high internally."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive supply voltage. Operating range 4.5 V to 18 V (SE555). Supply current typ 3 mA at VCC=5 V, 10 mA at VCC=15 V (output LOW)."
      }
    ],
    "provenance": {
      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction",
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "cad_basis": {
        "from": [
          "README CAD section (factory cad_wording)",
          ".kicad_mod model path agrees"
        ],
        "missing": []
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/se555.pdf",
        "citation": "Texas Instruments datasheet",
        "citation_note": "the maker's link now serves a different file than the copy stored here"
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "distributor_links": {
      "lcsc": "C967980",
      "digikey": "296-39169-2-ND",
      "mouser": "595-SE555DR"
    },
    "distributor_check": {
      "checked_at": "2026-10-05T19:16:15Z",
      "source": "Component Ocean /api/assign-pns + lcsc_map",
      "digikey": {
        "pn": "296-39169-2-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-SE555DR",
        "status": "found"
      }
    },
    "models_3d": [
      {
        "file": "se555dr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "se555dr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "16b8cb9b12fb65efad4900b7d09fcf36bdc9fb93cd69e4d7295d56297edd239c",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "org": "adom"
}