main
Ray
Publish 0.1.2
5011f9a
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171
{
"slug": "se3837b",
"version": "0.1.2",
"type": "component",
"description": "Seaward Elec DC-DC Converters, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
"tags": [
"component",
"pmic",
"se3837b"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"se3837b.kicad_sym",
"se3837b.kicad_mod",
"se3837b.glb",
"se3837b.step",
"se3837b.lbr",
"docs/hero.png",
"docs/se3837b-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"se3837b-etched.step",
"se3837b-etched.glb",
"se3837b-hero.glb",
"se3837b-hero.overlay.json"
],
"component": {
"mpn": "SE3837B",
"manufacturer": "Seaward Elec",
"package": "SOP-8",
"pin_count": 8,
"category": "DC-DC Converters",
"parts": {
"symbol": "se3837b.kicad_sym",
"footprint": "se3837b.kicad_mod",
"model_3d": "se3837b-hero.glb",
"model_3d_plain": "se3837b.glb",
"model_3d_step": "se3837b-etched.step",
"model_3d_step_plain": "se3837b.step",
"lbr": "se3837b.lbr"
},
"pins": [
{
"number": "1",
"name": "CS",
"type": "input",
"description": "Output current sense pin. Constant current is set by an external sense resistor Rcs from Vout- to GND: Iout = Vse/Rcs, where Vse depends on the grade (A: 105 mV, B: 120 mV, C: 140 mV, ±6%). Absolute maximum voltage 6.5 V."
},
{
"number": "2",
"name": "FB",
"type": "input",
"description": "Voltage feedback pin. Sense output voltage via an external resistor divider; internal reference is 1.25 V, so Vout = 1.25 * (1 + R2/R1). Absolute maximum voltage 6.5 V; SCP triggers when Vfb < 0.3 V."
},
{
"number": "3",
"name": "VDD",
"type": "power_out",
"description": "Internal LDO / bypass capacitor pin for the on-chip voltage regulator. Requires a 10 uF ceramic bypass capacitor to GND. Absolute maximum 6.5 V; not intended to drive external loads."
},
{
"number": "4",
"name": "VIN",
"type": "power_in",
"description": "Main power supply input, DC 4.5-40 V wide range. Requires an electrolytic bulk capacitor plus a ceramic decoupling capacitor to GND to suppress switching noise. UVLO threshold typ 4 V; absolute maximum 40 V."
},
{
"number": "5",
"name": "SW",
"type": "power_out",
"description": "Power switch output node. Connects to the source of the internal high-side MOSFET and drain of the low-side MOSFET; drive an external inductor to VOUT. Rds(on) high-side ~46 mΩ, low-side ~22 mΩ; typical peak current limit 3.5 A. Absolute maximum 40 V."
},
{
"number": "6",
"name": "SW",
"type": "power_out",
"description": "Power switch output node (tied to pin 5). Connects to the source of the internal high-side MOSFET and drain of the low-side MOSFET; drive an external inductor to VOUT. Absolute maximum 40 V."
},
{
"number": "7",
"name": "GND",
"type": "power_in",
"description": "Ground return pin (tied to pin 8). Both GND pins must connect to the board ground plane; they also serve as the primary thermal path from the die."
},
{
"number": "8",
"name": "GND",
"type": "power_in",
"description": "Ground return pin (tied to pin 7). Both GND pins must connect to the board ground plane; they also serve as the primary thermal path from the die."
}
],
"provenance": {
"rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction",
"cad": "KiCad official (CC-BY-SA 4.0)",
"cad_basis": {
"from": [
"README CAD section (factory cad_wording)",
".kicad_mod model path agrees"
],
"missing": []
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"distributor_links": {
"digikey": false,
"mouser": false
},
"distributor_check": {
"checked_at": "2026-10-05T19:16:11Z",
"source": "Component Ocean /api/assign-pns + lcsc_map",
"digikey": {
"pn": null,
"status": "no match"
},
"mouser": {
"pn": null,
"status": "no match"
}
},
"models_3d": [
{
"file": "se3837b.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "se3837b-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "a7b640b808190622d91aa85e345f1d4ed1a6cc7926b547fbc7e77222856e6b3e",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"visibility": "public"
}