main
Ray
Publish 0.1.0
3615bd2
SE2435L-R
Skyworks Solutions, Inc. · RF Front End Circuits · QFN-24-EP(4x4)
SE2435L-R from Skyworks Solutions, Inc., in a QFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CSD | input | Shutdown control input, logic high 1.6 V to Vcc and logic low 0 to 0.3 V, used to select the operating mode per Table 6. |
| 2 | PA_IN | input | PA input, fed from the TX filter. |
| 3 | CPS | input | Rx path select control input, logic high 1.6 V to Vcc and logic low 0 to 0.3 V, selecting LNA mode or bypass. |
| 4 | CTX | input | Transmit enable control input, logic high 1.6 V to Vcc and logic low 0 to 0.3 V. |
| 5 | TX_FLT | output | Transmit signal output to the TX filter. |
| 6 | TR | bidirectional | Bi-directional 50 ohm RF signal port to and from the transceiver. |
| 7 | ANT_SEL | input | Antenna select control input, logic low enables ANT1 and logic high enables ANT2, with a maximum input of 3.6 V. |
| 8 | GND | power_in | Ground. |
| 9 | LNA_IN | input | LNA input, fed from the RX filter. |
| 10 | N/C | unconnected | Not connected internally to the device. |
| 11 | RX_FLT | output | Rx signal from the antennas, output to the RX filter. |
| 12 | ANT2 | bidirectional | Antenna port 2, 50 ohm RF interface. |
| 13 | N/C | unconnected | Not connected internally to the device. |
| 14 | ANT1 | bidirectional | Antenna port 1, 50 ohm RF interface. |
| 15 | N/C | unconnected | Not connected internally to the device. |
| 16 | TX_IN | input | TX signal input to the antennas, fed from the output matching network (OMN). |
| 17 | N/C | unconnected | Not connected internally to the device. |
| 18 | N/C | unconnected | Not connected internally to the device. |
| 19 | N/C | unconnected | Not connected internally to the device. |
| 20 | PA_OUT | output | PA output to Z optimum, where Z optimum is 5 ohm for +30 dBm or 8 ohm for +27 dBm POUT. |
| 21 | VCC2 | power_in | Positive power supply, 2.0 to 4.8 V recommended operating range. |
| 22 | N/C | unconnected | Not connected internally to the device. |
| 23 | VCC0 | power_in | Positive power supply, 2.0 to 4.8 V recommended operating range. |
| 24 | VCC1 | power_in | Positive power supply, 2.0 to 4.8 V recommended operating range. |
| 25 | GND | power_in | Exposed die paddle providing electrical and thermal ground, to be connected to PCB ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Skyworks Solutions, Inc. |
| Package | QFN-24-EP(4x4) |
| Category | RF And Wireless |
| Pins | 25 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (no RF) | VCC | -0.3 | 5.5 | V | 2 | ||
| Operating temperature | TA | -40 | 85 | °C | 2 | ||
| Storage temperature | TSTG | -40 | 125 | °C | 2 | ||
| Tx input power at TR port | PIN_TX_MAX | 10 | dBm | 2 | |||
| Rx input power at ANT1 or ANT2 ports | PIN_RX_MAX | 10 | dBm | 2 | |||
| Supply voltage on VCC | VCC | 2 | 4 | 4.8 | V | 3 | |
| Ambient temperature | TA | -40 | 25 | 85 | °C | 3 | |
| Total supply current, transmit mode | ICC_TX30 | 550 | mA | POUT = +30 dBm | 3 | ||
| Total supply current, transmit mode | ICC_TX27 | 380 | mA | POUT = +27 dBm | 3 | ||
| Total supply current, transmit mode | ICC_TX24 | 275 | mA | POUT = +24 dBm | 3 | ||
| Total supply current, receive mode | ICC_RX | 6 | mA | 3 | |||
| Total supply current, receive bypass mode | ICC_RXB | 280 | μA | 3 | |||
| Quiescent current | ICQ_TX | 50 | mA | No RF | 3 | ||
| Sleep supply current | ICC_OFF | 0.05 | 1 | μA | No RF | 3 | |
| Control voltage high | VIH | 1.6 | V | 3 | |||
| Control voltage low | VIL | 0 | 0.3 | V | 3 | ||
| Input current high | IIH | 1 | μA | 3 | |||
| Input current low | IIL | 1 | μA | 3 | |||
| Frequency range | f | 860 | 930 | MHz | 4 | ||
| Output power at ANT1 or ANT2 ports in the 900 to 930 MHz frequency range | POUT_915 | 31.5 | dBm | VCC = 4.8 V | 4 | ||
| Output power at ANT1 or ANT2 ports in the 900 to 930 MHz frequency range | POUT_915 | 30.5 | dBm | VCC = 4.0 V | 4 | ||
| Output power at ANT1 or ANT2 ports in the 900 to 930 MHz frequency range | POUT_915 | 29.5 | dBm | VCC = 3.6 V | 4 | ||
| Output power at ANT1 or ANT2 ports in the 900 to 930 MHz frequency range | POUT_915 | 28 | dBm | VCC = 3.0 V | 4 | ||
| Output power at ANT1 or ANT2 ports in the 860 to 870 MHz frequency range | POUT_860 | 27 | dBm | VCC = 4.0 V | 4 | ||
| Output power at ANT1 or ANT2 ports in the 860 to 870 MHz frequency range | POUT_860 | 24 | dBm | VCC = 3.6 V | 4 | ||
| Output power at ANT1 or ANT2 ports in the 860 to 870 MHz frequency range | POUT_860 | 21 | dBm | VCC = 3.0 V | 4 | ||
| Output power at ANT1 or ANT2 ports in the 860 to 870 MHz frequency range | POUT_860 | 18 | dBm | VCC = 2.0 V | 4 | ||
| PA power added efficiency | PAE_PA | 64 | % | POUT = +28 dBm at PA_OUT port, 915 MHz | 4 | ||
| Small signal gain | S21_915 | 26 | dB | 900 to 930 MHz | 4 | ||
| Second harmonic | 2fo | -22 | dBc | POUT = +30 dBm | 4 | ||
| Third to tenth harmonic | 3fo to 10fo | -72 | dBc | POUT = +30 dBm | 4 | ||
| Turn-on time | tON | 1 | µs | From 50% of CTX edge to 90% of final RF output power | 4 | ||
| Turn-off time | tOFF | 1 | µs | 4 | |||
| Output return loss | S22ANT1 / S22ANT2 | -10 | -6 | dB | Into 50 Ω, ANT1 and ANT2 ports | 4 | |
| Receive gain | RX_GAIN | 14 | 16 | 18 | dB | 5 | |
| Receive noise figure | NF | 2 | 2.5 | dB | 5 | ||
| Input third order intercept | IIP3 | -5 | -2 | dBm | 5 | ||
| Input 1-dB compression point | IP1dB | -15 | -12 | dBm | 5 | ||
| Antenna port return loss | S11ANT1 / S11ANT2 | -12 | -8 | dB | Into 50 Ω, ANT1 and ANT2 ports | 5 | |
| Turn-on time | tON | 1 | μs | From 50% of CTX edge to 90% of final RF output power | 5 | ||
| Turn-off time | tOFF | 1 | μs | From 50% of CTX edge to 10% of final RF output power | 5 | ||
| Gain in bypass mode | G_bp | -3 | -2 | dB | 5 | ||
| Input 1-dB compression point in bypass mode | IP1dB | 10 | dBm | 5 | |||
| Isolation between ANT1 and ANT2 ports | ISOLANTSW | -20 | dB | 5 | |||
| Insertion loss from TX_IN to ANT1 | TX_ANT1 | 0.8 | dB | 5 | |||
| Insertion loss from TX_IN to ANT2 | TX_ANT2 | 0.8 | dB | 5 | |||
| Insertion loss from ANT1 to RX_FLT | RX_ANT1 | 0.6 | dB | 5 | |||
| Insertion loss from ANT2 to RX_FLT | RX_ANT2 | 0.6 | dB | 5 | |||
| Insertion loss from TR to TX_FLT | TxRx_Tx | 0.5 | dB | 5 | |||
| ANT1 to ANT2 switching time transmit mode | TANT1-ANT1_TX | 800 | ns | 5 | |||
| ANT1 to ANT2 switching time receive mode | Tant1-ant2_rx | 400 | ns | 5 |
CAD (KiCad official)
- Symbol:
SE2435L-R - Footprint:
Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm - 3D model: QFN-24-EP(4x4) (KiCad packages3D, STEP)
- 3D model files:
se2435l-r-etched.step/se2435l-r-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);se2435l-r.step/se2435l-r.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Skyworks Solutions, Inc. datasheet (13 pp, sha256
d6b15e957f7b301c, retrieved 2026-11-19) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SE2435L-R
**Skyworks Solutions, Inc.** · RF Front End Circuits · QFN-24-EP(4x4)
SE2435L-R from Skyworks Solutions, Inc., in a QFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CSD | input | Shutdown control input, logic high 1.6 V to Vcc and logic low 0 to 0.3 V, used to select the operating mode per Table 6. |
| 2 | PA_IN | input | PA input, fed from the TX filter. |
| 3 | CPS | input | Rx path select control input, logic high 1.6 V to Vcc and logic low 0 to 0.3 V, selecting LNA mode or bypass. |
| 4 | CTX | input | Transmit enable control input, logic high 1.6 V to Vcc and logic low 0 to 0.3 V. |
| 5 | TX_FLT | output | Transmit signal output to the TX filter. |
| 6 | TR | bidirectional | Bi-directional 50 ohm RF signal port to and from the transceiver. |
| 7 | ANT_SEL | input | Antenna select control input, logic low enables ANT1 and logic high enables ANT2, with a maximum input of 3.6 V. |
| 8 | GND | power_in | Ground. |
| 9 | LNA_IN | input | LNA input, fed from the RX filter. |
| 10 | N/C | unconnected | Not connected internally to the device. |
| 11 | RX_FLT | output | Rx signal from the antennas, output to the RX filter. |
| 12 | ANT2 | bidirectional | Antenna port 2, 50 ohm RF interface. |
| 13 | N/C | unconnected | Not connected internally to the device. |
| 14 | ANT1 | bidirectional | Antenna port 1, 50 ohm RF interface. |
| 15 | N/C | unconnected | Not connected internally to the device. |
| 16 | TX_IN | input | TX signal input to the antennas, fed from the output matching network (OMN). |
| 17 | N/C | unconnected | Not connected internally to the device. |
| 18 | N/C | unconnected | Not connected internally to the device. |
| 19 | N/C | unconnected | Not connected internally to the device. |
| 20 | PA_OUT | output | PA output to Z optimum, where Z optimum is 5 ohm for +30 dBm or 8 ohm for +27 dBm POUT. |
| 21 | VCC2 | power_in | Positive power supply, 2.0 to 4.8 V recommended operating range. |
| 22 | N/C | unconnected | Not connected internally to the device. |
| 23 | VCC0 | power_in | Positive power supply, 2.0 to 4.8 V recommended operating range. |
| 24 | VCC1 | power_in | Positive power supply, 2.0 to 4.8 V recommended operating range. |
| 25 | GND | power_in | Exposed die paddle providing electrical and thermal ground, to be connected to PCB ground. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Skyworks Solutions, Inc. |
| Package | QFN-24-EP(4x4) |
| Category | RF And Wireless |
| Pins | 25 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (no RF) | VCC | -0.3 | | 5.5 | V | | 2 |
| Operating temperature | TA | -40 | | 85 | °C | | 2 |
| Storage temperature | TSTG | -40 | | 125 | °C | | 2 |
| Tx input power at TR port | PIN_TX_MAX | | | 10 | dBm | | 2 |
| Rx input power at ANT1 or ANT2 ports | PIN_RX_MAX | | | 10 | dBm | | 2 |
| Supply voltage on VCC | VCC | 2 | 4 | 4.8 | V | | 3 |
| Ambient temperature | TA | -40 | 25 | 85 | °C | | 3 |
| Total supply current, transmit mode | ICC_TX30 | | | 550 | mA | POUT = +30 dBm | 3 |
| Total supply current, transmit mode | ICC_TX27 | | | 380 | mA | POUT = +27 dBm | 3 |
| Total supply current, transmit mode | ICC_TX24 | | | 275 | mA | POUT = +24 dBm | 3 |
| Total supply current, receive mode | ICC_RX | | | 6 | mA | | 3 |
| Total supply current, receive bypass mode | ICC_RXB | | | 280 | μA | | 3 |
| Quiescent current | ICQ_TX | | | 50 | mA | No RF | 3 |
| Sleep supply current | ICC_OFF | | 0.05 | 1 | μA | No RF | 3 |
| Control voltage high | VIH | 1.6 | | | V | | 3 |
| Control voltage low | VIL | 0 | | 0.3 | V | | 3 |
| Input current high | IIH | | | 1 | μA | | 3 |
| Input current low | IIL | | | 1 | μA | | 3 |
| Frequency range | f | 860 | | 930 | MHz | | 4 |
| Output power at ANT1 or ANT2 ports in the 900 to 930 MHz frequency range | POUT_915 | 31.5 | | | dBm | VCC = 4.8 V | 4 |
| Output power at ANT1 or ANT2 ports in the 900 to 930 MHz frequency range | POUT_915 | 30.5 | | | dBm | VCC = 4.0 V | 4 |
| Output power at ANT1 or ANT2 ports in the 900 to 930 MHz frequency range | POUT_915 | 29.5 | | | dBm | VCC = 3.6 V | 4 |
| Output power at ANT1 or ANT2 ports in the 900 to 930 MHz frequency range | POUT_915 | 28 | | | dBm | VCC = 3.0 V | 4 |
| Output power at ANT1 or ANT2 ports in the 860 to 870 MHz frequency range | POUT_860 | 27 | | | dBm | VCC = 4.0 V | 4 |
| Output power at ANT1 or ANT2 ports in the 860 to 870 MHz frequency range | POUT_860 | 24 | | | dBm | VCC = 3.6 V | 4 |
| Output power at ANT1 or ANT2 ports in the 860 to 870 MHz frequency range | POUT_860 | 21 | | | dBm | VCC = 3.0 V | 4 |
| Output power at ANT1 or ANT2 ports in the 860 to 870 MHz frequency range | POUT_860 | 18 | | | dBm | VCC = 2.0 V | 4 |
| PA power added efficiency | PAE_PA | 64 | | | % | POUT = +28 dBm at PA_OUT port, 915 MHz | 4 |
| Small signal gain | S21_915 | 26 | | | dB | 900 to 930 MHz | 4 |
| Second harmonic | 2fo | | | -22 | dBc | POUT = +30 dBm | 4 |
| Third to tenth harmonic | 3fo to 10fo | | | -72 | dBc | POUT = +30 dBm | 4 |
| Turn-on time | tON | | | 1 | µs | From 50% of CTX edge to 90% of final RF output power | 4 |
| Turn-off time | tOFF | | | 1 | µs | | 4 |
| Output return loss | S22ANT1 / S22ANT2 | -10 | | -6 | dB | Into 50 Ω, ANT1 and ANT2 ports | 4 |
| Receive gain | RX_GAIN | 14 | 16 | 18 | dB | | 5 |
| Receive noise figure | NF | 2 | | 2.5 | dB | | 5 |
| Input third order intercept | IIP3 | -5 | | -2 | dBm | | 5 |
| Input 1-dB compression point | IP1dB | -15 | | -12 | dBm | | 5 |
| Antenna port return loss | S11ANT1 / S11ANT2 | -12 | | -8 | dB | Into 50 Ω, ANT1 and ANT2 ports | 5 |
| Turn-on time | tON | | | 1 | μs | From 50% of CTX edge to 90% of final RF output power | 5 |
| Turn-off time | tOFF | | | 1 | μs | From 50% of CTX edge to 10% of final RF output power | 5 |
| Gain in bypass mode | G_bp | -3 | | -2 | dB | | 5 |
| Input 1-dB compression point in bypass mode | IP1dB | 10 | | | dBm | | 5 |
| Isolation between ANT1 and ANT2 ports | ISOLANTSW | -20 | | | dB | | 5 |
| Insertion loss from TX_IN to ANT1 | TX_ANT1 | | | 0.8 | dB | | 5 |
| Insertion loss from TX_IN to ANT2 | TX_ANT2 | | | 0.8 | dB | | 5 |
| Insertion loss from ANT1 to RX_FLT | RX_ANT1 | | | 0.6 | dB | | 5 |
| Insertion loss from ANT2 to RX_FLT | RX_ANT2 | | | 0.6 | dB | | 5 |
| Insertion loss from TR to TX_FLT | TxRx_Tx | | | 0.5 | dB | | 5 |
| ANT1 to ANT2 switching time transmit mode | TANT1-ANT1_TX | | | 800 | ns | | 5 |
| ANT1 to ANT2 switching time receive mode | Tant1-ant2_rx | | | 400 | ns | | 5 |
## CAD (KiCad official)
- Symbol: `SE2435L-R`
- Footprint: `Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm`
- 3D model: QFN-24-EP(4x4) (KiCad packages3D, STEP)
- 3D model files: `se2435l-r-etched.step` / `se2435l-r-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `se2435l-r.step` / `se2435l-r.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Skyworks Solutions, Inc. datasheet](https://www.skyworksinc.com/-/media/D3C064001C9E45EDB6C26EDBFB0FD0F5.pdf) (13 pp, sha256 `d6b15e957f7b301c`, retrieved 2026-11-19)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/se2435l-r-datasheet.pdf)