Generated by kicad-footprint-generator · KiCad file format 20260206
SD8910G
SHOUDING · DC-DC Converters · SOT-23-6
SD8910G from SHOUDING, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BST | passive | High-side gate drive bootstrap pin. A 0.1uF~1uF capacitor must be connected from BST to LX to boost the gate drive and fully turn on the internal high-side NMOS. |
| 2 | GND | power_in | Device ground return pin. |
| 3 | FB | input | Voltage feedback input. Connect a resistive divider from VOUT to FB to GND; the loop regulates FB to the internal 0.6V reference. |
| 4 | SHDN | input | Enable input. Pull high to turn the IC on, pull low to turn it off. Can be tied to VIN through a 100kΩ resistor for self-startup. |
| 5 | VIN | power_in | Power supply input, 4.5V to 21V. Place the input capacitor(s) as close as possible from VIN to GND to minimize noise and switching ringing. |
| 6 | LX | output | Power switching node between the internal high-side and low-side MOSFETs. Connect the external inductor from LX to VOUT; also the bottom terminal of the BST bootstrap capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SHOUDING |
| Package | SOT-23-6 |
| Category | PMIC |
| Pins | 6 |
Ordering variants
Same part, different packaging or reel option.
SD8910GS6CTR
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Feedback Voltage | VFB | 0.591 | 0.6 | 0.609 | V | 4.5V≦VIN≦21V | 5 |
| VIN Shutdown Supply Current | ISD | 1 | 10 | μA | H =0V | 5 | |
| Feedback Input Current | IFB | 0.01 | 0.1 | μA | VFB=1V | 5 | |
| Input Supply Voltage UVLO Threshold | VUVLO(Vth) | 4.3 | V | VIN Rising | 5 | ||
| VIN Quiescent Current | IDDQ | 0.3 | mA | H =2V, VFB=1V | 5 | ||
| High-Side MOSFET RDS(ON) | RDS(ON) | 145 | mΩ | 5 | |||
| Low-Side MOSFET RDS(ON) | RDS(ON) | 90 | mΩ | 5 | |||
| Valley Current Limit | ILIMIT | 3 | A | Note 3: not production tested | 5 | ||
| On Time | TON | 150 | ns | VIN=12V, VOUT=1.05V | 5 | ||
| Minimum Off Time | TOFF(MIN) | 180 | ns | VFB=0.4V | 5 | ||
| UVLO Threshold Hysteresis | VUVLO(HYS) | 0.35 | V | 5 | |||
| Internal Soft-Start Period | TSS | 1.5 | ms | Note 3: not production tested | 5 | ||
| EN Input Low Voltage | H (L | 0.5 | V | 5 | |||
| EN Input High Voltage | H (H | 1.5 | V | 5 | |||
| EN Input Current | H H | 2 | μA | H =2V | 5 | ||
| Thermal Shutdown Threshold | TSD | 160 | °C | Note 3: not production tested | 5 | ||
| Thermal Shutdown Hysteresis | THYS | 30 | °C | Note 3: not production tested | 5 | ||
| Supply Voltage VIN | VIN | 4.5 | 21 | V | 4 | ||
| Operation Temperature Range | -40 | 85 | °C | 4 | |||
| Supply Voltage VIN (absolute maximum) | VIN | -0.3 | 22 | V | 4 | ||
| Enable Voltage H (absolute maximum) | H | -0.3 | 22 | V | 4 | ||
| LX Voltage (absolute maximum) | VLX | -0.3 | V | max = VIN +0.3V | 4 | ||
| Dynamic LX Voltage in 15ns Duration | -5 | V | 15ns duration; max = VIN +5V | 4 | |||
| BST Pin Voltage (absolute maximum) | VBST | -0.3 | V | max = VLX +6.5V | 4 | ||
| All Other Pins Voltage (absolute maximum) | -0.3 | 6 | V | 4 | |||
| Maximum Junction Temperature | TJ | 150 | °C | 4 | |||
| Storage Temperature | TS | -65 | 150 | °C | 4 | ||
| Lead Temperature (Soldering) | 260 | °C | 10 sec. | 4 | |||
| Package Thermal Resistance, junction-to-ambient (SOT-23-6) | θJA | 250 | °C/W | Note 2: measured at 25°C ambient on JEDEC-51-7 4-layer board | 4 | ||
| Package Thermal Resistance, junction-to-case (SOT-23-6) | θJC | 110 | °C/W | 4 |
CAD (KiCad official)
- Symbol:
SD8910G - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
sd8910g-etched.step/sd8910g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sd8910g.step/sd8910g.glbare the bare package body.
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
sd8910g.step |
97 KB | You want the bare part, or you mark your own boards. |
sd8910g-etched.step |
1.8 MB | You want the part with SD8910G already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 436 faces against 117 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SHOUDING datasheet (9 pp, sha256
b07def98d87038c2, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).