SD5820A

{
  "slug": "sd5820a",
  "version": "0.1.0",
  "type": "component",
  "description": "Hangzhou SDIC Microelectronics Temperature Sensors, TO-92. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "sensors",
    "sd5820a",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "sd5820a.kicad_sym",
    "sd5820a.kicad_mod",
    "sd5820a.glb",
    "sd5820a.step",
    "sd5820a.lbr",
    "docs/hero.png",
    "docs/sd5820a-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "sd5820a-hero.glb",
    "sd5820a-hero.overlay.json",
    "sd5820a-etched.glb"
  ],
  "component": {
    "mpn": "SD5820A",
    "manufacturer": "Hangzhou SDIC Microelectronics",
    "package": "TO-92",
    "pin_count": 3,
    "category": "Sensors",
    "subcategory": "Temperature Sensors",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588888173267333120",
    "parts": {
      "symbol": "sd5820a.kicad_sym",
      "footprint": "sd5820a.kicad_mod",
      "model_3d": "sd5820a-hero.glb",
      "model_3d_plain": "sd5820a-etched.glb",
      "model_3d_step": "sd5820a-etched.step",
      "model_3d_step_plain": "sd5820a.step",
      "lbr": "sd5820a.lbr"
    },
    "distributor_links": {
      "lcsc": "C414112"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T10:41:38Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Ground connection for the sensor; parasitic-power mode requires VDD to be tied to this ground."
      },
      {
        "number": "2",
        "name": "DIO",
        "type": "bidirectional",
        "description": "Open-drain single-wire data port that needs an external pull-up resistor, with a minimum 4 mA sink current at VOL=0.3 V and maximum 1 uA high-level leakage at VOH=VDD."
      },
      {
        "number": "3",
        "name": "VDD",
        "type": "power_in",
        "description": "Supply pin with a 2.7 V to 5.5 V operating range (3.0 V typical); the device can also run in parasitic-power mode drawn from the bus."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The ordering table lists only the TO-92 package for SD5820A, so the TO-92 pinout applies. The pin fi; The datasheet does not describe the pins in more detail than a pin-function table. The GND descripti"
        ],
        "pages_sent": 17,
        "cost_usd": 0.0592,
        "at": "2026-10-18T10:40:00"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588888173267333120",
        "pages": 17,
        "sha256": "e902541916ede2b7",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 3,
        "described": 3,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "sd5820a.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          4.83,
          3.745,
          9.8
        ],
        "zmin_mm": -2.5,
        "centre_offset_mm": 0.542,
        "footprint_binding": "identity",
        "sha256": "f0b61c32ecbf0067157adc5a3d4966ceadf5d6dafe93c51af35f76c41c71a54a",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "sd5820a-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          4.83,
          3.745,
          9.8
        ],
        "zmin_mm": -2.5,
        "centre_offset_mm": 0.542,
        "footprint_binding": "identity",
        "sha256": "f10993aaf81946bb9cd51c19a9a68b3eb5d4e9fe6e3bf4e52feb5092737560fb",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}