SD5075

{
  "slug": "sd5075",
  "version": "0.1.0",
  "type": "component",
  "description": "Hangzhou SDIC Microelectronics Temperature Sensors, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "sensors",
    "sd5075",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "sd5075.kicad_sym",
    "sd5075.kicad_mod",
    "sd5075.glb",
    "sd5075.step",
    "sd5075.lbr",
    "docs/hero.png",
    "docs/sd5075-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "sd5075-hero.glb",
    "sd5075-hero.overlay.json",
    "sd5075-etched.glb"
  ],
  "component": {
    "mpn": "SD5075",
    "manufacturer": "Hangzhou SDIC Microelectronics",
    "package": "SOP-8",
    "pin_count": 8,
    "category": "Sensors",
    "subcategory": "Temperature Sensors",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588884301052325888",
    "parts": {
      "symbol": "sd5075.kicad_sym",
      "footprint": "sd5075.kicad_mod",
      "model_3d": "sd5075-hero.glb",
      "model_3d_plain": "sd5075-etched.glb",
      "model_3d_step": "sd5075-etched.step",
      "model_3d_step_plain": "sd5075.step",
      "lbr": "sd5075.lbr"
    },
    "distributor_links": {
      "lcsc": "C414113"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T00:41:49Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "SDA",
        "type": "bidirectional",
        "description": "Two-wire serial data line, I2C/SMBus compatible, which must be pulled up externally, and holding it low for more than 200 ms resets the two-wire interface to idle (open-drain) state (Trst 200 ms typical)."
      },
      {
        "number": "2",
        "name": "SCL",
        "type": "input",
        "description": "Two-wire serial clock line, I2C/SMBus compatible, which requires an external pull-up resistor."
      },
      {
        "number": "3",
        "name": "ALARM",
        "type": "output",
        "description": "Open-drain over-temperature alarm output, also usable as SMBus Alert when configuration bit7 is set, with sink current of at least 4 mA at VOL=0.3V and leakage of at most 1 uA at VOH=VDD."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference pin for the device."
      },
      {
        "number": "5",
        "name": "A2",
        "type": "input",
        "description": "Address select input that sets bit A2 of the 7-bit slave address (1001 A2 A1 A0, giving 48H to 4FH)."
      },
      {
        "number": "6",
        "name": "A1",
        "type": "input",
        "description": "Address select input that sets bit A1 of the 7-bit slave address (1001 A2 A1 A0, giving 48H to 4FH)."
      },
      {
        "number": "7",
        "name": "A0",
        "type": "input",
        "description": "Address select input that sets bit A0 of the 7-bit slave address (1001 A2 A1 A0, giving 48H to 4FH)."
      },
      {
        "number": "8",
        "name": "VDD",
        "type": "power_in",
        "description": "Supply pin with a working range of 2.7 V to 5.5 V and an absolute maximum of 7.0 V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The pin description table (page 2) lists A2-A0 as a single grouped row 5-7. The individual pin assig; The datasheet gives only the 200 ms SDA-low reset time and the SDA line is not a pure output. The ty"
        ],
        "pages_sent": 13,
        "cost_usd": 0.0574,
        "at": "2026-10-18T00:39:51"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588884301052325888",
        "pages": 13,
        "sha256": "e649893d70719c5c",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "sd5075.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "sd5075-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "1d36cabecc90938b82f2029c516815c619229438dbc6d9991fb00206816812b5",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}