← Commit history

sct2a23aster: factory component page (tier=lcsc)

Ray ·814ba0dc97 · ·parent 8f536fd
1 file changed +122−8
page.json+122−8
@@ -1,13 +1,132 @@ {+  "schema_version": 1,+  "type": "component",   "slug": "sct2a23aster",+  "title": "SCT2A23ASTER",+  "brief": "SCT DC-DC Converters, ESOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "version": "0.1.0",-  "type": "component",-  "description": "SCT DC-DC Converters, ESOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "license": "CC-BY-SA-4.0",   "tags": [     "component",     "pmic",     "sct2a23aster"   ],+  "component": {+    "mpn": "SCT2A23ASTER",+    "manufacturer": "SCT",+    "package": "ESOP-8",+    "pin_count": 9,+    "category": "PMIC",+    "subcategory": "DC-DC Converters",+    "datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2110131830_SCT-SCT2A23ASTER_C2901894.pdf",+    "parts": {+      "symbol": "sct2a23aster.kicad_sym",+      "footprint": "sct2a23aster.kicad_mod",+      "model_3d": "sct2a23aster.glb",+      "model_3d_step": "sct2a23aster.step",+      "lbr": "sct2a23aster.lbr"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "GND",+        "type": "power_in",+        "description": "Ground return. Electrically connected to the exposed thermal pad (pin 9)."+      },+      {+        "number": "2",+        "name": "VIN",+        "type": "power_in",+        "description": "Input supply voltage, 4.5V to 100V operating range (absolute max 105V). Connect a local bypass capacitor from VIN to GND; path from VIN to the high-frequency bypass capacitor and GND must be as short as possible."+      },+      {+        "number": "3",+        "name": "EN",+        "type": "input",+        "description": "Enable input to the regulator, with internal pull-up current source. Float or tie to VIN to enable; pull below 1.23V to disable. A resistor divider from VIN to GND on EN programs the input UVLO threshold (VEN_H \u2248 1.24V, VEN_L \u2248 1.23V; IEN \u2248 17\u00b5A at 1.5V)."+      },+      {+        "number": "4",+        "name": "MODE",+        "type": "input",+        "description": "Light-load operation mode selection. Connect to VCC via a resistor for Forced PWM (FPWM, VMD_PWM \u2265 4.65V); ground for PFM (VMD_PFM \u2264 0.5V); leave floating for Ultrasonic Mode (USM, 1.5V-3.5V)."+      },+      {+        "number": "5",+        "name": "FB",+        "type": "input",+        "description": "Inverting input of the internal PWM comparator. Tap of an external feedback resistor divider from VOUT to GND sets the output voltage; regulated to VREF = 1.2V typical (1.176V-1.224V)."+      },+      {+        "number": "6",+        "name": "VCC",+        "type": "power_out",+        "description": "Output of the internal high-voltage LDO regulator (typ 7.3V), used to bias gate drivers and internal circuitry. Decouple with a capacitor larger than 1.0\u00b5F to GND."+      },+      {+        "number": "7",+        "name": "BST",+        "type": "passive",+        "description": "Bootstrap supply for the high-side MOSFET gate driver. Connect a 0.1\u00b5F capacitor from BST to SW; the bootstrap cap is charged when the low-side MOSFET is on or SW is low. Absolute max BOOT-SW = 6V."+      },+      {+        "number": "8",+        "name": "SW",+        "type": "power_out",+        "description": "Regulator switching output node between the internal high-side and low-side MOSFETs. Connect to the external power inductor. Absolute max -1V to 105V."+      },+      {+        "number": "9",+        "name": "Thermal Pad",+        "type": "power_in",+        "description": "Exposed thermal pad, heat dissipation path of the die. Electrically connected to GND (pin 1); must be soldered to the PCB ground plane for proper operation and optimized thermal performance."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2110131830_SCT-SCT2A23ASTER_C2901894.pdf",+        "pages": 24,+        "sha256": "8741c4cd91d63328",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 9,+        "described": 9,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "metadata": {+    "specs": {+      "Manufacturer": "SCT",+      "Package": "ESOP-8",+      "Category": "PMIC",+      "Pins": "9"+    }+  },+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"+  ],+  "discovery_triggers": [+    "sct2a23aster"+  ],+  "discovery_pitch": "SCT2A23ASTER (SCT) component page with datasheet-verified CAD.",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  },   "dependencies": {},   "hero": {     "type": "image",@@ -25,10 +144,5 @@     "docs/sct2a23aster-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": "public",-  "author": {-    "name": "Ray",-    "email": "[email protected]"-  }+  ] }\ No newline at end of file