← Commit history
README.mdadded+48@@ -0,0 +1,48 @@+# SCT2A23ASTER++**SCT** · DC-DC Converters · ESOP-8++SCT2A23ASTER from SCT, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | GND | power_in | Ground return. Electrically connected to the exposed thermal pad (pin 9). |+| 2 | VIN | power_in | Input supply voltage, 4.5V to 100V operating range (absolute max 105V). Connect a local bypass capacitor from VIN to GND; path from VIN to the high-frequency bypass capacitor and GND must be as short as possible. |+| 3 | EN | input | Enable input to the regulator, with internal pull-up current source. Float or tie to VIN to enable; pull below 1.23V to disable. A resistor divider from VIN to GND on EN programs the input UVLO threshold (VEN_H ≈ 1.24V, VEN_L ≈ 1.23V; IEN ≈ 17µA at 1.5V). |+| 4 | MODE | input | Light-load operation mode selection. Connect to VCC via a resistor for Forced PWM (FPWM, VMD_PWM ≥ 4.65V); ground for PFM (VMD_PFM ≤ 0.5V); leave floating for Ultrasonic Mode (USM, 1.5V-3.5V). |+| 5 | FB | input | Inverting input of the internal PWM comparator. Tap of an external feedback resistor divider from VOUT to GND sets the output voltage; regulated to VREF = 1.2V typical (1.176V-1.224V). |+| 6 | VCC | power_out | Output of the internal high-voltage LDO regulator (typ 7.3V), used to bias gate drivers and internal circuitry. Decouple with a capacitor larger than 1.0µF to GND. |+| 7 | BST | passive | Bootstrap supply for the high-side MOSFET gate driver. Connect a 0.1µF capacitor from BST to SW; the bootstrap cap is charged when the low-side MOSFET is on or SW is low. Absolute max BOOT-SW = 6V. |+| 8 | SW | power_out | Regulator switching output node between the internal high-side and low-side MOSFETs. Connect to the external power inductor. Absolute max -1V to 105V. |+| 9 | Thermal Pad | power_in | Exposed thermal pad, heat dissipation path of the die. Electrically connected to GND (pin 1); must be soldered to the PCB ground plane for proper operation and optimized thermal performance. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | SCT |+| Package | ESOP-8 |+| Category | PMIC |+| Pins | 9 |++## Ordering variants++- `SCT2A23ASTER`++## CAD (KiCad official)++- Symbol: `SCT2A23ASTER`+- Footprint: `Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm`+- 3D model: ESOP-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [SCT datasheet](docs/sct2a23aster-datasheet.pdf) (24 pp, sha256 `8741c4cd91d63328`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/sct2a23aster-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "sct2a23aster",+ "version": "0.1.0",+ "type": "component",+ "description": "SCT DC-DC Converters, ESOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "pmic",+ "sct2a23aster"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "sct2a23aster.kicad_sym",+ "sct2a23aster.kicad_mod",+ "sct2a23aster.glb",+ "sct2a23aster.step",+ "sct2a23aster.lbr",+ "docs/hero.png",+ "docs/sct2a23aster-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}