← Commit history

Set visibility: public

Ray ·4386798534 · ·parent c314b5a
1 file changed +8−5
page.json+8−5
@@ -44,13 +44,13 @@         "number": "3",         "name": "EN",         "type": "input",-        "description": "Enable input to the regulator, with internal pull-up current source. Float or tie to VIN to enable; pull below 1.23V to disable. A resistor divider from VIN to GND on EN programs the input UVLO threshold (VEN_H \u2248 1.24V, VEN_L \u2248 1.23V; IEN \u2248 17\u00b5A at 1.5V)."+        "description": "Enable input to the regulator, with internal pull-up current source. Float or tie to VIN to enable; pull below 1.23V to disable. A resistor divider from VIN to GND on EN programs the input UVLO threshold (VEN_H ≈ 1.24V, VEN_L ≈ 1.23V; IEN ≈ 17µA at 1.5V)."       },       {         "number": "4",         "name": "MODE",         "type": "input",-        "description": "Light-load operation mode selection. Connect to VCC via a resistor for Forced PWM (FPWM, VMD_PWM \u2265 4.65V); ground for PFM (VMD_PFM \u2264 0.5V); leave floating for Ultrasonic Mode (USM, 1.5V-3.5V)."+        "description": "Light-load operation mode selection. Connect to VCC via a resistor for Forced PWM (FPWM, VMD_PWM ≥ 4.65V); ground for PFM (VMD_PFM ≤ 0.5V); leave floating for Ultrasonic Mode (USM, 1.5V-3.5V)."       },       {         "number": "5",@@ -62,13 +62,13 @@         "number": "6",         "name": "VCC",         "type": "power_out",-        "description": "Output of the internal high-voltage LDO regulator (typ 7.3V), used to bias gate drivers and internal circuitry. Decouple with a capacitor larger than 1.0\u00b5F to GND."+        "description": "Output of the internal high-voltage LDO regulator (typ 7.3V), used to bias gate drivers and internal circuitry. Decouple with a capacitor larger than 1.0µF to GND."       },       {         "number": "7",         "name": "BST",         "type": "passive",-        "description": "Bootstrap supply for the high-side MOSFET gate driver. Connect a 0.1\u00b5F capacitor from BST to SW; the bootstrap cap is charged when the low-side MOSFET is on or SW is low. Absolute max BOOT-SW = 6V."+        "description": "Bootstrap supply for the high-side MOSFET gate driver. Connect a 0.1µF capacitor from BST to SW; the bootstrap cap is charged when the low-side MOSFET is on or SW is low. Absolute max BOOT-SW = 6V."       },       {         "number": "8",@@ -144,5 +144,8 @@     "docs/sct2a23aster-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ]+  ],+  "visibility": {+    "public": true+  } }\ No newline at end of file