component
SCT2A10STER
Public Made by Adomby adom
SCT DC-DC Converters, ESOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+8−5@@ -44,19 +44,19 @@ "number": "3", "name": "EN", "type": "input",- "description": "Enable input with internal pull-up current source (~1-4\u00b5A). Pull below 1.1V to disable the converter; float or drive to VIN to enable. A resistor divider from VIN to GND on EN programs the input UVLO threshold (VEN_H\u22481.21V, VEN_L\u22481.05V)."+ "description": "Enable input with internal pull-up current source (~1-4µA). Pull below 1.1V to disable the converter; float or drive to VIN to enable. A resistor divider from VIN to GND on EN programs the input UVLO threshold (VEN_H≈1.21V, VEN_L≈1.05V)." }, { "number": "4", "name": "RT", "type": "input",- "description": "Switching frequency programming pin. A resistor from RT to GND sets the internal oscillator frequency from 300kHz to 800kHz (e.g. RRT=500k\u03a9 \u2248500kHz). An external clock may be applied directly to RT/CLK to synchronize the internal PLL; if the external clock stops, operation reverts to the resistor-programmed frequency."+ "description": "Switching frequency programming pin. A resistor from RT to GND sets the internal oscillator frequency from 300kHz to 800kHz (e.g. RRT=500kΩ ≈500kHz). An external clock may be applied directly to RT/CLK to synchronize the internal PLL; if the external clock stops, operation reverts to the resistor-programmed frequency." }, { "number": "5", "name": "FB", "type": "input",- "description": "Inverting input of the transconductance error amplifier. Connect the tap of the external output-to-GND resistor divider here; the device regulates FB to VREF = 0.8V typical (\u00b11%)."+ "description": "Inverting input of the transconductance error amplifier. Connect the tap of the external output-to-GND resistor divider here; the device regulates FB to VREF = 0.8V typical (±1%)." }, { "number": "6",@@ -68,7 +68,7 @@ "number": "7", "name": "BST", "type": "passive",- "description": "Bootstrap supply for the high-side MOSFET gate driver. Connect a 0.1\u00b5F ceramic capacitor from BST to SW; the cap is recharged from an internal rail whenever the low-side MOSFET is on or SW is low. BOOT-SW absolute max is 6V."+ "description": "Bootstrap supply for the high-side MOSFET gate driver. Connect a 0.1µF ceramic capacitor from BST to SW; the cap is recharged from an internal rail whenever the low-side MOSFET is on or SW is low. BOOT-SW absolute max is 6V." }, { "number": "8",@@ -144,5 +144,8 @@ "docs/sct2a10ster-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }