← Commit history

Initial commit: component/sct2632aster

Ray ·29568d002f ·
2 files changed +82
README.mdadded+48
@@ -0,0 +1,48 @@+# SCT2632ASTER++**SCT** · DC-DC Converters · ESOP-8++SCT2632ASTER from SCT, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | BOOT | power_in | Power supply bias for the high-side power MOSFET gate driver. Connect a 0.1µF bootstrap capacitor from BOOT to SW; the cap charges when SW is low. Absolute max 71V (BOOT-SW max 6V). |+| 2 | VIN | power_in | Input supply voltage, 4.5V to 60V operating range. Connect a local bypass capacitor from VIN to GND; the path from VIN to the high-frequency bypass cap and GND must be as short as possible. |+| 3 | EN | input | Enable pin with internal pull-up (1µA/4µA). Pull below 1.05V to disable; float or tie to VIN to enable. A resistor divider from VIN to GND on EN programs the input UVLO threshold (VEN_H = 1.2V typ). |+| 4 | RT/CLK | bidirectional | Sets the internal oscillator switching frequency (100kHz-1.2MHz) via a resistor to GND, or accepts an external clock for PLL synchronization. If the external clock stops, the part automatically reverts to the resistor-programmed frequency. Typical pin voltage 0.5V; do not float or short to GND. |+| 5 | FB | input | Inverting input of the trans-conductance error amplifier. External resistor divider from VOUT to GND to FB sets the output voltage; the device regulates FB to the internal 0.8V ±1% reference. |+| 6 | SS | passive | Soft-start programming pin. Connect a capacitor from SS to GND; an internal 3µA source charges CSS to program soft-start time (tSS = CSS × 0.8V / 3µA). Programmed soft-start time should be greater than 4ms. |+| 7 | GND | power_in | Device ground return. Bond to the ground plane together with the thermal pad. |+| 8 | SW | power_out | Regulator switching output - drain of the internal high-side MOSFET. Connect to the external power inductor. Absolute max range -1V to 65V. |+| 9 | Thermal Pad | passive | Exposed die-attach pad for heat dissipation. Electrically connected to GND (pin 7) and must be soldered to the PCB ground plane for correct operation and optimized thermal performance (θJA = 42°C/W on the standard board). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | SCT |+| Package | ESOP-8 |+| Category | PMIC |+| Pins | 9 |++## Ordering variants++- `SCT2632ASTER`++## CAD (KiCad official)++- Symbol: `SCT2632ASTER`+- Footprint: `Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm`+- 3D model: ESOP-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [SCT datasheet](docs/sct2632aster-datasheet.pdf) (21 pp, sha256 `675137521e5fc015`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/sct2632aster-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "sct2632aster",+  "version": "0.1.0",+  "type": "component",+  "description": "SCT DC-DC Converters, ESOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "pmic",+    "sct2632aster"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "sct2632aster.kicad_sym",+    "sct2632aster.kicad_mod",+    "sct2632aster.glb",+    "sct2632aster.step",+    "sct2632aster.lbr",+    "docs/hero.png",+    "docs/sct2632aster-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file