component
SCT2630STER
Public Made by Adomby adom
SCT DC-DC Converters, ESOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+9−6@@ -50,19 +50,19 @@ "number": "4", "name": "RT/CLK", "type": "bidirectional",- "description": "Sets internal oscillator frequency via a resistor to GND (100 kHz-1.2 MHz), or accepts an external clock for PLL sync (100 kHz-1.2 MHz, high \u22652V, low \u22640.4V, pulse width >80ns). Typical pin voltage 0.5V in RT mode. If external clock stops, mode reverts automatically to resistor-programmed frequency. Absolute max 6V."+ "description": "Sets internal oscillator frequency via a resistor to GND (100 kHz-1.2 MHz), or accepts an external clock for PLL sync (100 kHz-1.2 MHz, high ≥2V, low ≤0.4V, pulse width >80ns). Typical pin voltage 0.5V in RT mode. If external clock stops, mode reverts automatically to resistor-programmed frequency. Absolute max 6V." }, { "number": "5", "name": "FB", "type": "input",- "description": "Inverting input of the trans-conductance error amplifier. External resistor divider from VOUT to GND ties to FB; device regulates FB to the internal 0.8V (\u00b11%) reference. Absolute max 6V."+ "description": "Inverting input of the trans-conductance error amplifier. External resistor divider from VOUT to GND ties to FB; device regulates FB to the internal 0.8V (±1%) reference. Absolute max 6V." }, { "number": "6", "name": "COMP", "type": "output",- "description": "Error amplifier output for external loop compensation network (typ. series R-C to GND). COMP clamps at ~2.25V high and ~0.47V low; EA gm = 240 \u00b5A/V, source/sink current 24 \u00b5A. Absolute max 6V."+ "description": "Error amplifier output for external loop compensation network (typ. series R-C to GND). COMP clamps at ~2.25V high and ~0.47V low; EA gm = 240 µA/V, source/sink current 24 µA. Absolute max 6V." }, { "number": "7",@@ -74,13 +74,13 @@ "number": "8", "name": "SW", "type": "power_out",- "description": "Switching node - source of the internal 220m\u03a9 high-side MOSFET. Connect to the external power inductor and (for asynchronous operation) the anode of a Schottky freewheeling diode. Absolute max range -1V to 65V."+ "description": "Switching node - source of the internal 220mΩ high-side MOSFET. Connect to the external power inductor and (for asynchronous operation) the anode of a Schottky freewheeling diode. Absolute max range -1V to 65V." }, { "number": "9", "name": "Thermal Pad", "type": "power_in",- "description": "Exposed die-pad for heat dissipation. Electrically connected to GND (pin 7) and must be soldered to the PCB ground plane for proper operation and optimum thermal performance (\u03b8JA \u2248 42 \u00b0C/W)."+ "description": "Exposed die-pad for heat dissipation. Electrically connected to GND (pin 7) and must be soldered to the PCB ground plane for proper operation and optimum thermal performance (θJA ≈ 42 °C/W)." } ], "provenance": {@@ -144,5 +144,8 @@ "docs/sct2630ster-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }