main
Ray Publish 0.1.0 805f5c7
{
  "slug": "sct2612ster",
  "version": "0.1.0",
  "type": "component",
  "description": "SCT DC-DC Converters, ESOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "sct2612ster",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "sct2612ster.kicad_sym",
    "sct2612ster.kicad_mod",
    "sct2612ster.glb",
    "sct2612ster.step",
    "sct2612ster.lbr",
    "docs/hero.png",
    "docs/sct2612ster-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "sct2612ster-hero.glb",
    "sct2612ster-hero.overlay.json",
    "sct2612ster-etched.glb"
  ],
  "component": {
    "mpn": "SCT2612STER",
    "manufacturer": "SCT",
    "package": "ESOP-8",
    "pin_count": 9,
    "category": "Power Management (PMIC)",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8757136906843111424",
    "parts": {
      "symbol": "sct2612ster.kicad_sym",
      "footprint": "sct2612ster.kicad_mod",
      "model_3d": "sct2612ster-hero.glb",
      "model_3d_plain": "sct2612ster-etched.glb",
      "model_3d_step": "sct2612ster-etched.step",
      "model_3d_step_plain": "sct2612ster.step",
      "lbr": "sct2612ster.lbr"
    },
    "distributor_links": {
      "lcsc": "C5200341"
    },
    "distributor_check": {
      "checked_at": "2026-11-07T02:36:16Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "BOOT",
        "type": "power_in",
        "description": "Bias supply for the high-side MOSFET gate driver; connect a 0.1uF capacitor from BOOT to SW, which charges while SW is low."
      },
      {
        "number": "2",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply voltage with an operating range of 4.2V to 60V; place a local bypass capacitor from VIN to GND as close as possible to the pins."
      },
      {
        "number": "3",
        "name": "EN",
        "type": "input",
        "description": "Enable input with an internal pull-up current source; pull below 1.05V to disable the converter, float or tie to VIN to enable it, and use a resistor divider from VIN to set the input UVLO threshold."
      },
      {
        "number": "4",
        "name": "RT/CLK",
        "type": "input",
        "description": "Sets the switching frequency with a resistor to ground (100kHz to 1.2MHz) or accepts an external clock in the same 100kHz to 1.2MHz band via PLL synchronization, reverting to the resistor-set frequency if clock edges stop."
      },
      {
        "number": "5",
        "name": "FB",
        "type": "input",
        "description": "Inverting input of the transconductance error amplifier that regulates to 0.8V typical (0.792V to 0.808V) through an external feedback divider from the output."
      },
      {
        "number": "6",
        "name": "PGOOD",
        "type": "output",
        "description": "Open-drain power-good output that asserts low when the output is low due to thermal shutdown, dropout, over-voltage or EN shutdown."
      },
      {
        "number": "7",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the device."
      },
      {
        "number": "8",
        "name": "SW",
        "type": "output",
        "description": "Regulator switching node that connects to the external power inductor."
      },
      {
        "number": "9",
        "name": "Thermal Pad",
        "type": "power_in",
        "description": "Heat dissipation path from the die that is electrically connected to GND and must be soldered to a ground plane on the PCB for proper operation and thermal performance."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The thermal pad is listed as pin 9 in the PIN FUNCTIONS table, but it is not a numbered lead; it is ; Pin numbers 1 to 8 and the thermal pad came from the PIN FUNCTIONS NO. column. The pin configuration; The package outline section is titled 'SOP8/PP(95x130)' while the device is listed as ESOP-8. The di"
        ],
        "pages_sent": 4,
        "cost_usd": 0.0574,
        "at": "2026-11-07T02:36:00"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8757136906843111424",
        "pages": 20,
        "sha256": "e2572ef44d882d59",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "sct2612ster.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.9,
          4.9,
          1.65
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "f1718a42c5ea007e8e2dd672ac39a1bb358ee4849bd53c42e21ce83e0e5df7a9",
        "checked": "2026-11-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "sct2612ster-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.9,
          4.9,
          1.65
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "d5f411e7c6a91311ab7cd025ff26859e123c981a1648278ab8105ff2db44f893",
        "checked": "2026-11-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}