main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs sct2601tvbr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers sct2601tvbr: viewers · Ray
package.json Publish 0.2.1 · Ray
page.json Publish 0.2.1 · Ray
README.md sct2601tvbr: specified limits as data (metadata.characteristics, 34 rows from the datasheet) · Ray
sct2601tvbr-etched.fit.json sct2601tvbr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
sct2601tvbr-etched.glb sct2601tvbr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
sct2601tvbr-etched.step sct2601tvbr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
sct2601tvbr-hero.glb sct2601tvbr: hero from the plain model · Ray
sct2601tvbr-hero.overlay.json sct2601tvbr: hero from the plain model · Ray
sct2601tvbr.glb Publish 0.1.0 · Ray
sct2601tvbr.kicad_mod Publish 0.1.0 · Ray
sct2601tvbr.kicad_sym Publish 0.1.0 · Ray
sct2601tvbr.lbr Publish 0.1.0 · Ray
sct2601tvbr.step Publish 0.1.0 · Ray

SCT2601TVBR

SCT · DC-DC Converters · TSOT-23-6

SCT2601TVBR from SCT, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 BST passive Bootstrap supply for the high-side MOSFET gate driver. Connect a 0.1 µF capacitor from BST to SW; the bootstrap capacitor is charged when SW is low. BST-SW absolute max 6 V; BOOT-SW UVLO ~2.2 V typical.
2 GND power_in Device ground return.
3 FB input Buck converter output feedback sensing input. Connect a resistor divider from VOUT to FB to set the output voltage; the device regulates FB to the internal 0.765 V reference (±2.5%).
4 EN input Enable input with an internal pull-up current source (1 µA at 1 V, 4 µA at 1.5 V). Pull below 1.13 V to disable the converter; float or tie to VIN to enable. A resistor divider from VIN to GND at EN can program the input UVLO threshold; enable high threshold ~1.223 V typ, hysteresis ~93 mV.
5 VIN power_in Input supply voltage, 4.5 V to 60 V (65 V absolute max). Connect a local bypass capacitor from VIN to GND. Internal VIN UVLO ~4.23 V rising with 200 mV hysteresis.
6 SW power_out Switching node output from the internal high-side MOSFET (500 mΩ typ, 1.6 A typ peak current limit). Connect to the external power inductor of the buck converter. Absolute max -1 V to 65 V.

Key specifications

Parameter Value
Manufacturer SCT
Package TSOT-23-6
Category PMIC
Pins 6

Ordering variants

Same part, different packaging or reel option.

  • SCT2601TVBR

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VIN, EN pins voltage VIN, EN -0.3 65 V 2
BST pin voltage BST -0.3 72 V 2
SW pin voltage SW -1 65 V 2
BST-SW voltage BST-SW -0.3 6 V 2
FB pin voltage FB -0.3 6 V 2
Operating junction temperature TJ -40 150 °C 2
Storage temperature TSTG -65 150 °C 2
Input voltage range VIN 4.5 60 V 3
Output voltage range VOUT 0.765 57 V 3
Operating junction temperature (recommended) TJ -40 150 °C 3
Operating input voltage VIN 4.5 60 V 4
Input UVLO threshold VIN_UVLO 4.23 4.45 V VIN rising 4
Shutdown current from VIN pin ISHDN 1.65 5 μA EN=0, no load 4
Reference voltage of FB VREF 0.746 0.765 0.784 V 4
High-side power MOSFET peak current limit threshold ILIM_HS 1.1 1.6 2 A 4
Enable high threshold VEN_H 1.223 1.4 V 4
Enable low threshold VEN_L 0.9 1.13 V 4
Switching frequency FSW 574 700 826 kHz 4
Quiescent current from VIN pin IQ 80 μA EN floating, no load, non-switching 4
High-side MOSFET on-resistance RDSON_H 500 mΩ VBOOT-VSW=5V 4
Input UVLO hysteresis 200 mV 4
Enable threshold hysteresis VEN_HYS 93 mV 4
Enable pin pull-up current IEN_L 1 μA EN=1V 4
Enable pin pull-up current IEN_H 4 uA EN=1.5V 4
Soft start time TSS 6 ms 4
Minimum on-time tON_MIN 80 ns VIN=12V 4
Feedback overvoltage threshold (rising) VOVP 110 % VFB/VREF rising 4
Feedback overvoltage threshold (falling) VOVP 105 % VFB/VREF falling 4
BOOT-SW UVLO threshold VBOOTUV 2.2 V BOOT-SW falling 4
BOOT-SW UVLO hysteresis 250 mV 4
Thermal shutdown threshold TSD 173 °C TJ rising 4
Thermal shutdown hysteresis 10 °C 4
Junction to ambient thermal resistance RθJA 102 °C/W 3
Junction to case thermal resistance RθJC 36.9 °C/W 3

CAD (KiCad official)

  • Symbol: SCT2601TVBR
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: TSOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: sct2601tvbr-etched.step / sct2601tvbr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sct2601tvbr.step / sct2601tvbr.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
sct2601tvbr.step 97 KB You want the bare part, or you mark your own boards.
sct2601tvbr-etched.step 2.1 MB You want the part with SCT2601TVBR already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 514 faces against 117 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SCT datasheet (21 pp, sha256 e0cf9f672262043a, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF