← Commit history
page.json+8−5@@ -32,7 +32,7 @@ "number": "1", "name": "BST", "type": "passive",- "description": "Bootstrap supply for the high-side MOSFET gate driver. Connect a 0.1 \u00b5F capacitor from BST to SW; the bootstrap capacitor is charged when SW is low. BST-SW absolute max 6 V; BOOT-SW UVLO ~2.2 V typical."+ "description": "Bootstrap supply for the high-side MOSFET gate driver. Connect a 0.1 µF capacitor from BST to SW; the bootstrap capacitor is charged when SW is low. BST-SW absolute max 6 V; BOOT-SW UVLO ~2.2 V typical." }, { "number": "2",@@ -44,13 +44,13 @@ "number": "3", "name": "FB", "type": "input",- "description": "Buck converter output feedback sensing input. Connect a resistor divider from VOUT to FB to set the output voltage; the device regulates FB to the internal 0.765 V reference (\u00b12.5%)."+ "description": "Buck converter output feedback sensing input. Connect a resistor divider from VOUT to FB to set the output voltage; the device regulates FB to the internal 0.765 V reference (±2.5%)." }, { "number": "4", "name": "EN", "type": "input",- "description": "Enable input with an internal pull-up current source (1 \u00b5A at 1 V, 4 \u00b5A at 1.5 V). Pull below 1.13 V to disable the converter; float or tie to VIN to enable. A resistor divider from VIN to GND at EN can program the input UVLO threshold; enable high threshold ~1.223 V typ, hysteresis ~93 mV."+ "description": "Enable input with an internal pull-up current source (1 µA at 1 V, 4 µA at 1.5 V). Pull below 1.13 V to disable the converter; float or tie to VIN to enable. A resistor divider from VIN to GND at EN can program the input UVLO threshold; enable high threshold ~1.223 V typ, hysteresis ~93 mV." }, { "number": "5",@@ -62,7 +62,7 @@ "number": "6", "name": "SW", "type": "power_out",- "description": "Switching node output from the internal high-side MOSFET (500 m\u03a9 typ, 1.6 A typ peak current limit). Connect to the external power inductor of the buck converter. Absolute max -1 V to 65 V."+ "description": "Switching node output from the internal high-side MOSFET (500 mΩ typ, 1.6 A typ peak current limit). Connect to the external power inductor of the buck converter. Absolute max -1 V to 65 V." } ], "provenance": {@@ -126,5 +126,8 @@ "docs/sct2601tvbr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }