← Commit history

Initial commit: component/sct2452ster

Ray ·d561e37253 ·
2 files changed +84
README.mdadded+50
@@ -0,0 +1,50 @@+# SCT2452STER++**SCT** · DC-DC Converters · ESOP-8++SCT2452STER from SCT, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | BOOT | power_in | Bootstrap supply for high-side power MOSFET gate driver. Connect a 0.1µF capacitor between BOOT and SW; the bootstrap cap is charged when the low-side MOSFET is on or SW is low. BOOT-SW UVLO threshold ≈ 2.36V. |+| 2 | VIN | power_in | Input supply voltage, 3.8V to 36V (42V transient max). Connect a local high-frequency bypass capacitor from VIN to GND as close as possible to the pin. |+| 3 | EN | input | Enable input with internal pull-up current source (~1.5µA at 1V). Pull below 1.1V to disable the converter; float or tie to VIN to enable. A VIN-to-GND resistor divider on EN sets a programmable input UVLO threshold (VEN_H ≈ 1.18V). |+| 4 | RT/CLK | bidirectional | Sets internal oscillator frequency or accepts an external clock. Resistor to GND programs Fsw from 100kHz to 1.1MHz (e.g. 200kΩ ≈ 500kHz); alternatively drive with an external clock (100kHz-1.1MHz) for PLL synchronization. Reverts to resistor-programmed frequency if the external clock stops. |+| 5 | FB | input | Inverting input of the transconductance error amplifier. Connect a resistor divider from VOUT to FB to GND; the loop regulates FB to VREF = 0.8V (typ, ±1%). Overvoltage protection trips at ~110% of VREF. |+| 6 | SS | passive | Soft-start programming pin. Connect a capacitor from SS to GND; internal ~3µA source current charges it to set the output voltage ramp time. |+| 7 | GND | power_in | Device ground. Common return for input bypass, output feedback, and control-circuit references. |+| 8 | SW | power_out | Switch node - regulator switching output. Connect to the external power inductor. Absolute range -1V to 38V; also the bootstrap capacitor return for the high-side driver. |+| 9 | Thermal Pad | power_in | Exposed thermal pad on the ESOP-8 package. Electrically connected to GND (pin 7). Must be soldered to the PCB ground plane for proper thermal performance. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | SCT |+| Package | ESOP-8 |+| Category | PMIC |+| Pins | 9 |++## Ordering variants++Same part, different packaging or reel option.++- `SCT2452STER`++## CAD (KiCad official)++- Symbol: `SCT2452STER`+- Footprint: `Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm`+- 3D model: ESOP-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [SCT datasheet](docs/sct2452ster-datasheet.pdf) (22 pp, sha256 `a97363c67f20b5f7`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/sct2452ster-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "sct2452ster",+  "version": "0.1.0",+  "type": "component",+  "description": "SCT DC-DC Converters, ESOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "pmic",+    "sct2452ster"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "sct2452ster.kicad_sym",+    "sct2452ster.kicad_mod",+    "sct2452ster.glb",+    "sct2452ster.step",+    "sct2452ster.lbr",+    "docs/hero.png",+    "docs/sct2452ster-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file