← Commit history
README.mdadded+48@@ -0,0 +1,48 @@+# SCT2450QSTER++**SCT** · DC-DC Converters · ESOP-8++SCT2450QSTER from SCT, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | BOOT | passive | Power supply bias for the high-side power MOSFET gate driver. Connect a 0.1 µF bootstrap capacitor from BOOT to SW. The bootstrap capacitor is charged when the low-side MOSFET is on or SW is low. Absolute max 44 V (BOOT-SW max 6 V). |+| 2 | VIN | power_in | Input supply voltage, 3.8 V to 36 V operating (absolute max 38 V, 42 V transient 300 ms). Connect a local high-frequency bypass capacitor from VIN to GND as short as possible. |+| 3 | EN | input | Enable pin to the regulator with internal pull-up current source (1.5 µA typ at 1 V). Pull below 1.1 V to disable the converter; float or tie to VIN to enable. A resistor divider from VIN to GND to EN can program the input UVLO threshold. Enable high threshold 1.18 V typ. |+| 4 | RT/CLK | bidirectional | Frequency set / external clock input. Connect a resistor from RT/CLK to GND to set the internal oscillator frequency (100 kHz to 2.2 MHz). Alternatively drive with an external clock (100 kHz-2.2 MHz); the internal PLL synchronizes to the external clock and reverts to resistor-set frequency if clock edges stop. |+| 5 | FB | input | Inverting input of the trans-conductance error amplifier. Tap an external resistor divider from VOUT to GND to set the output voltage; the device regulates FB to the internal reference of 0.8 V (±1%) typical. |+| 6 | COMP | output | Error amplifier output. Connect a frequency loop compensation network (typically series R + C, optional parallel C) from COMP to GND. Clamp voltages: high 3 V, low 0.4 V. |+| 7 | GND | power_in | Device ground return. |+| 8 | SW | power_out | Regulator switching node. Connect SW to the external power inductor. This is the switch node between the integrated high-side (48 mΩ) and low-side (23 mΩ) power MOSFETs. Absolute max range -1 V to 38 V. |+| 9 | Thermal Pad | power_in | Exposed thermal pad on the ESOP-8 package. Heat dissipation path of the die; electrically connected to GND. Must be soldered to the PCB ground plane for proper operation and optimized thermal performance (θJA ≈ 42 °C/W, θJC ≈ 45.8 °C/W). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | SCT |+| Package | ESOP-8 |+| Category | PMIC |+| Pins | 9 |++## Ordering variants++- `SCT2450QSTER`++## CAD (KiCad official)++- Symbol: `SCT2450QSTER`+- Footprint: `Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm`+- 3D model: ESOP-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [SCT datasheet](docs/sct2450qster-datasheet.pdf) (22 pp, sha256 `74bb039979bfaa07`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/sct2450qster-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "sct2450qster",+ "version": "0.1.0",+ "type": "component",+ "description": "SCT DC-DC Converters, ESOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "pmic",+ "sct2450qster"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "sct2450qster.kicad_sym",+ "sct2450qster.kicad_mod",+ "sct2450qster.glb",+ "sct2450qster.step",+ "sct2450qster.lbr",+ "docs/hero.png",+ "docs/sct2450qster-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}