← Commit history

sct2450qster: factory component page (tier=lcsc)

Ray ·df488e2f5e · ·parent 3d262e7
1 file changed +122−8
page.json+122−8
@@ -1,13 +1,132 @@ {+  "schema_version": 1,+  "type": "component",   "slug": "sct2450qster",+  "title": "SCT2450QSTER",+  "brief": "SCT DC-DC Converters, ESOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "version": "0.1.0",-  "type": "component",-  "description": "SCT DC-DC Converters, ESOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "license": "CC-BY-SA-4.0",   "tags": [     "component",     "pmic",     "sct2450qster"   ],+  "component": {+    "mpn": "SCT2450QSTER",+    "manufacturer": "SCT",+    "package": "ESOP-8",+    "pin_count": 9,+    "category": "PMIC",+    "subcategory": "DC-DC Converters",+    "datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2201121430_SCT-SCT2450QSTER_C2929524.pdf",+    "parts": {+      "symbol": "sct2450qster.kicad_sym",+      "footprint": "sct2450qster.kicad_mod",+      "model_3d": "sct2450qster.glb",+      "model_3d_step": "sct2450qster.step",+      "lbr": "sct2450qster.lbr"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "BOOT",+        "type": "passive",+        "description": "Power supply bias for the high-side power MOSFET gate driver. Connect a 0.1 \u00b5F bootstrap capacitor from BOOT to SW. The bootstrap capacitor is charged when the low-side MOSFET is on or SW is low. Absolute max 44 V (BOOT-SW max 6 V)."+      },+      {+        "number": "2",+        "name": "VIN",+        "type": "power_in",+        "description": "Input supply voltage, 3.8 V to 36 V operating (absolute max 38 V, 42 V transient 300 ms). Connect a local high-frequency bypass capacitor from VIN to GND as short as possible."+      },+      {+        "number": "3",+        "name": "EN",+        "type": "input",+        "description": "Enable pin to the regulator with internal pull-up current source (1.5 \u00b5A typ at 1 V). Pull below 1.1 V to disable the converter; float or tie to VIN to enable. A resistor divider from VIN to GND to EN can program the input UVLO threshold. Enable high threshold 1.18 V typ."+      },+      {+        "number": "4",+        "name": "RT/CLK",+        "type": "bidirectional",+        "description": "Frequency set / external clock input. Connect a resistor from RT/CLK to GND to set the internal oscillator frequency (100 kHz to 2.2 MHz). Alternatively drive with an external clock (100 kHz-2.2 MHz); the internal PLL synchronizes to the external clock and reverts to resistor-set frequency if clock edges stop."+      },+      {+        "number": "5",+        "name": "FB",+        "type": "input",+        "description": "Inverting input of the trans-conductance error amplifier. Tap an external resistor divider from VOUT to GND to set the output voltage; the device regulates FB to the internal reference of 0.8 V (\u00b11%) typical."+      },+      {+        "number": "6",+        "name": "COMP",+        "type": "output",+        "description": "Error amplifier output. Connect a frequency loop compensation network (typically series R + C, optional parallel C) from COMP to GND. Clamp voltages: high 3 V, low 0.4 V."+      },+      {+        "number": "7",+        "name": "GND",+        "type": "power_in",+        "description": "Device ground return."+      },+      {+        "number": "8",+        "name": "SW",+        "type": "power_out",+        "description": "Regulator switching node. Connect SW to the external power inductor. This is the switch node between the integrated high-side (48 m\u03a9) and low-side (23 m\u03a9) power MOSFETs. Absolute max range -1 V to 38 V."+      },+      {+        "number": "9",+        "name": "Thermal Pad",+        "type": "power_in",+        "description": "Exposed thermal pad on the ESOP-8 package. Heat dissipation path of the die; electrically connected to GND. Must be soldered to the PCB ground plane for proper operation and optimized thermal performance (\u03b8JA \u2248 42 \u00b0C/W, \u03b8JC \u2248 45.8 \u00b0C/W)."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2201121430_SCT-SCT2450QSTER_C2929524.pdf",+        "pages": 22,+        "sha256": "74bb039979bfaa07",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 9,+        "described": 9,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "metadata": {+    "specs": {+      "Manufacturer": "SCT",+      "Package": "ESOP-8",+      "Category": "PMIC",+      "Pins": "9"+    }+  },+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"+  ],+  "discovery_triggers": [+    "sct2450qster"+  ],+  "discovery_pitch": "SCT2450QSTER (SCT) component page with datasheet-verified CAD.",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  },   "dependencies": {},   "hero": {     "type": "image",@@ -25,10 +144,5 @@     "docs/sct2450qster-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": "public",-  "author": {-    "name": "Ray",-    "email": "[email protected]"-  }+  ] }\ No newline at end of file