← Commit history
page.json+9−6@@ -32,7 +32,7 @@ "number": "1", "name": "BOOT", "type": "passive",- "description": "Power supply bias for the high-side power MOSFET gate driver. Connect a 0.1 \u00b5F bootstrap capacitor from BOOT to SW. The bootstrap capacitor is charged when the low-side MOSFET is on or SW is low. Absolute max 44 V (BOOT-SW max 6 V)."+ "description": "Power supply bias for the high-side power MOSFET gate driver. Connect a 0.1 µF bootstrap capacitor from BOOT to SW. The bootstrap capacitor is charged when the low-side MOSFET is on or SW is low. Absolute max 44 V (BOOT-SW max 6 V)." }, { "number": "2",@@ -44,7 +44,7 @@ "number": "3", "name": "EN", "type": "input",- "description": "Enable pin to the regulator with internal pull-up current source (1.5 \u00b5A typ at 1 V). Pull below 1.1 V to disable the converter; float or tie to VIN to enable. A resistor divider from VIN to GND to EN can program the input UVLO threshold. Enable high threshold 1.18 V typ."+ "description": "Enable pin to the regulator with internal pull-up current source (1.5 µA typ at 1 V). Pull below 1.1 V to disable the converter; float or tie to VIN to enable. A resistor divider from VIN to GND to EN can program the input UVLO threshold. Enable high threshold 1.18 V typ." }, { "number": "4",@@ -56,7 +56,7 @@ "number": "5", "name": "FB", "type": "input",- "description": "Inverting input of the trans-conductance error amplifier. Tap an external resistor divider from VOUT to GND to set the output voltage; the device regulates FB to the internal reference of 0.8 V (\u00b11%) typical."+ "description": "Inverting input of the trans-conductance error amplifier. Tap an external resistor divider from VOUT to GND to set the output voltage; the device regulates FB to the internal reference of 0.8 V (±1%) typical." }, { "number": "6",@@ -74,13 +74,13 @@ "number": "8", "name": "SW", "type": "power_out",- "description": "Regulator switching node. Connect SW to the external power inductor. This is the switch node between the integrated high-side (48 m\u03a9) and low-side (23 m\u03a9) power MOSFETs. Absolute max range -1 V to 38 V."+ "description": "Regulator switching node. Connect SW to the external power inductor. This is the switch node between the integrated high-side (48 mΩ) and low-side (23 mΩ) power MOSFETs. Absolute max range -1 V to 38 V." }, { "number": "9", "name": "Thermal Pad", "type": "power_in",- "description": "Exposed thermal pad on the ESOP-8 package. Heat dissipation path of the die; electrically connected to GND. Must be soldered to the PCB ground plane for proper operation and optimized thermal performance (\u03b8JA \u2248 42 \u00b0C/W, \u03b8JC \u2248 45.8 \u00b0C/W)."+ "description": "Exposed thermal pad on the ESOP-8 package. Heat dissipation path of the die; electrically connected to GND. Must be soldered to the PCB ground plane for proper operation and optimized thermal performance (θJA ≈ 42 °C/W, θJC ≈ 45.8 °C/W)." } ], "provenance": {@@ -144,5 +144,8 @@ "docs/sct2450qster-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }