← Commit history
sct2230tvbr: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+62−1
page.json+62−1@@ -33,5 +33,66 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "SCT2230TVBR",+ "manufacturer": "SCT",+ "package": "TSOT-23-6L",+ "pin_count": 6,+ "category": "DC-DC Converters",+ "parts": {+ "symbol": "sct2230tvbr.kicad_sym",+ "footprint": "sct2230tvbr.kicad_mod",+ "model_3d": "sct2230tvbr-etched.glb",+ "model_3d_plain": "sct2230tvbr.glb",+ "model_3d_step": "sct2230tvbr-etched.step",+ "model_3d_step_plain": "sct2230tvbr.step",+ "lbr": "sct2230tvbr.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "GND",+ "type": "power_in",+ "description": "Power ground. Return for both the internal power MOSFETs and the control circuitry; must be soldered directly to the PCB ground plane for proper thermal and electrical performance."+ },+ {+ "number": "2",+ "name": "SW",+ "type": "power_out",+ "description": "Power switching output. Common node of the internal high-side and low-side MOSFETs; connect the external inductor from SW to the output LC filter. Also serves as the low-side reference for the bootstrap capacitor between BST and SW that powers the high-side gate driver."+ },+ {+ "number": "3",+ "name": "VIN",+ "type": "power_in",+ "description": "Power supply input, 4.2 V to 17 V (absolute max 20 V). Supplies both the IC bias and the step-down converter power stage. Bypass to GND with a low-ESR ceramic capacitor (typically 10 µF plus a local 0.1 µF) placed close to the pin to filter switching noise."+ },+ {+ "number": "4",+ "name": "FB",+ "type": "input",+ "description": "Buck converter output-voltage feedback sense input. Connect an external resistor divider from VOUT to FB (and FB to GND); the loop regulates FB to the internal 0.8 V (typ) reference to program the output voltage over the 0.8 V-7 V range."+ },+ {+ "number": "5",+ "name": "EN",+ "type": "input",+ "description": "Enable / programmable UVLO logic input. Precision thresholds 1.18 V rising / 1.1 V falling; an internal 1.5 µA pull-up lets a floating pin auto-enable the device, and a 6.8 µA hysteresis current source allows a resistor divider from VIN to program the input UVLO. Can be tied directly to VIN. High-voltage tolerant up to 6.5 V."+ },+ {+ "number": "6",+ "name": "BST",+ "type": "power_in",+ "description": "Bootstrap supply for the high-side power MOSFET gate driver. Connect a 0.1 µF (or greater) ceramic capacitor between BST and SW; an internal regulator refreshes this capacitor when the low-side FET is on. BST-to-SW UVLO is 2.2 V rising with 200 mV hysteresis (absolute max VSW+6 V)."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}