main
Ray
sct2220tvbr: laser-etched CAD + chip hero (factory 2.0.0 backfill)
54e07d6
SCT2220TVBR
SCT · DC-DC Converters · TSOT-23-6L
SCT2220TVBR from SCT, in a TSOT-23-6L. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Power ground return for the IC and the low-side power MOSFET. Must be soldered directly to the board ground plane for proper thermal and electrical performance. |
| 2 | SW | power_out | Power switching output - the junction of the high-side and low-side MOSFETs. Connect the external buck inductor from SW to the output, and a 0.1 µF (or greater) bootstrap capacitor from SW to BST. |
| 3 | VIN | power_in | Power supply input, 4.2 V to 17 V (18 V absolute max). Supplies both the IC and the high-side power switch; bypass to GND with a suitably large ceramic capacitor placed close to the pin. |
| 4 | FB | input | Buck converter feedback sensing input. Connect a resistor divider from VOUT to FB to set the output voltage; the internal reference regulates FB to 0.8 V typical (0.78-0.82 V). |
| 5 | EN | input | Enable/UVLO logic input. Precision thresholds 1.18 V rising / 1.10 V falling with ~6.8 µA hysteresis current allow programmable UVLO via a resistor divider from VIN. Floating the pin enables the device; tie to GND (or below the low threshold) to shut down. |
| 6 | BST | passive | Bootstrap supply for the high-side MOSFET gate driver. Connect a 0.1 µF (or greater) ceramic capacitor between BST and SW to develop the boosted drive rail. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SCT |
| Package | TSOT-23-6L |
| Category | PMIC |
| Pins | 6 |
Ordering variants
SCT2220TVBRSCT2220TVBRTVASCT2220TVBRTVAR
CAD (KiCad official)
- Symbol:
SCT2220TVBR - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: TSOT-23-6L (KiCad packages3D, STEP)
- 3D model files:
sct2220tvbr-etched.step/sct2220tvbr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sct2220tvbr.step/sct2220tvbr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SCT datasheet (17 pp, sha256
c9a21075d50243c2, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SCT2220TVBR
**SCT** · DC-DC Converters · TSOT-23-6L
SCT2220TVBR from SCT, in a TSOT-23-6L. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Power ground return for the IC and the low-side power MOSFET. Must be soldered directly to the board ground plane for proper thermal and electrical performance. |
| 2 | SW | power_out | Power switching output - the junction of the high-side and low-side MOSFETs. Connect the external buck inductor from SW to the output, and a 0.1 µF (or greater) bootstrap capacitor from SW to BST. |
| 3 | VIN | power_in | Power supply input, 4.2 V to 17 V (18 V absolute max). Supplies both the IC and the high-side power switch; bypass to GND with a suitably large ceramic capacitor placed close to the pin. |
| 4 | FB | input | Buck converter feedback sensing input. Connect a resistor divider from VOUT to FB to set the output voltage; the internal reference regulates FB to 0.8 V typical (0.78-0.82 V). |
| 5 | EN | input | Enable/UVLO logic input. Precision thresholds 1.18 V rising / 1.10 V falling with ~6.8 µA hysteresis current allow programmable UVLO via a resistor divider from VIN. Floating the pin enables the device; tie to GND (or below the low threshold) to shut down. |
| 6 | BST | passive | Bootstrap supply for the high-side MOSFET gate driver. Connect a 0.1 µF (or greater) ceramic capacitor between BST and SW to develop the boosted drive rail. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SCT |
| Package | TSOT-23-6L |
| Category | PMIC |
| Pins | 6 |
## Ordering variants
- `SCT2220TVBR`
- `SCT2220TVBRTVA`
- `SCT2220TVBRTVAR`
## CAD (KiCad official)
- Symbol: `SCT2220TVBR`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: TSOT-23-6L (KiCad packages3D, STEP)
- 3D model files: `sct2220tvbr-etched.step` / `sct2220tvbr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sct2220tvbr.step` / `sct2220tvbr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [SCT datasheet](docs/sct2220tvbr-datasheet.pdf) (17 pp, sha256 `c9a21075d50243c2`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sct2220tvbr-datasheet.pdf)