Generated by kicad-footprint-generator · KiCad file format 20260206
SC92F8542M20U
SOC(Shenzhen SinOne Microelectronics) · Microcontroller Units (MCUs/MPUs/SOCs) · SOP-20-300mil
SC92F8542M20U from SOC(Shenzhen SinOne Microelectronics), in a SOP-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P0.6/INT06/TK30 | bidirectional | GPIO P0.6 with external interrupt 0 input INT06 and touch-key channel TK30; all IO can sink 50mA and are on the programmable pull-up/high-impedance input scheme. |
| 2 | P0.7/INT07/CMOD | bidirectional | GPIO P0.7 with external interrupt 0 input INT07; the CMOD function is the touch-key external sensing capacitor connection (Cmod 0.01µF in the block diagram). |
| 3 | VSS | power_in | Ground reference for the device. |
| 4 | VDD | power_in | Supply pin; operating range is 2.4V to 5.5V, with 2.9V minimum required when the system clock is 16MHz. |
| 5 | P4.3/INT13/PWM43/CMP3/AIN15 | bidirectional | GPIO P4.3 that also serves as external interrupt INT13, PWM43 output, analog comparator input CMP3 and ADC input AIN15. |
| 6 | P4.2/INT12/PWM42/CMP2/AIN14 | bidirectional | GPIO P4.2 that also serves as external interrupt INT12, PWM42 output, analog comparator input CMP2 and ADC input AIN14. |
| 7 | P4.1/INT11/PWM41/CMP1/AIN13 | bidirectional | GPIO P4.1 that also serves as external interrupt INT11, PWM41 output, analog comparator input CMP1 and ADC input AIN13. |
| 8 | P4.0/INT10/PWM40/CMP0/AIN12 | bidirectional | GPIO P4.0 that also serves as external interrupt INT10, PWM40 output, analog comparator input CMP0 and ADC input AIN12. |
| 9 | P1.0/TK8 | bidirectional | GPIO P1.0 that also serves as touch-key channel TK8. |
| 10 | P1.1/MISO/RX1/TK9/tCK | bidirectional | GPIO P1.1 multiplexed with SPI MISO, UART1 RX1, touch-key channel TK9 and the programming/emulation clock tCK; TK9 should be avoided when TK debug is used. |
| 11 | P1.2/SCK/TK10 | bidirectional | GPIO P1.2 that also serves as SPI/TWI clock SCK and touch-key channel TK10. |
| 12 | P1.3/MOSI/SDA/TX1/TK11/tDIO | bidirectional | GPIO P1.3 multiplexed with SPI MOSI, TWI SDA, UART1 TX1, touch-key channel TK11 and the programming/emulation data line tDIO; TK11 should be avoided when TK debug is used. |
| 13 | P2.0/INT20/AIN4/TK16 | bidirectional | GPIO P2.0 that also serves as external interrupt INT20, ADC input AIN4 and touch-key channel TK16. |
| 14 | P2.1/INT21/AIN5/TK17 | bidirectional | GPIO P2.1 that also serves as external interrupt INT21, ADC input AIN5 and touch-key channel TK17. |
| 15 | P2.2/INT22/AIN6/TK18 | bidirectional | GPIO P2.2 that also serves as external interrupt INT22, ADC input AIN6 and touch-key channel TK18. |
| 16 | P2.3/INT23/AIN7/TK19 | bidirectional | GPIO P2.3 that also serves as external interrupt INT23, ADC input AIN7 and touch-key channel TK19. |
| 17 | P2.4/TK20 | bidirectional | GPIO P2.4 that also serves as touch-key channel TK20. |
| 18 | P2.5/TK21 | bidirectional | GPIO P2.5 that also serves as touch-key channel TK21. |
| 19 | P0.2/T0/TX0/TK26 | bidirectional | GPIO P0.2 that also serves as Timer0 external counter input T0, UART0 transmit TX0 and touch-key channel TK26. |
| 20 | P0.3/T1/RX0/TK27 | bidirectional | GPIO P0.3 that also serves as Timer1 external counter input T1, UART0 receive RX0 and touch-key channel TK27. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SOC(Shenzhen SinOne Microelectronics) |
| Package | SOP-20-300mil |
| Category | Embedded Processors & Controllers |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| DC supply voltage | VDD/VSS | -0.3 | 5.5 | V | 79 | ||
| Voltage on any pin (任一管脚输入/输出电压) | -0.3 | V | 79 | ||||
| Operating ambient temperature (工作环境温度) | TA | -40 | 85 | ℃ | 79 | ||
| Storage temperature (储存温度) | TSTG | -55 | 125 | ℃ | 79 | ||
| Operating voltage (工作电压, system clock 16MHz) | VDD | 2.9 | 5.5 | V | 系统时钟频率 16MHz | 79 | |
| Operating voltage (工作电压, system clock 8/4/1.33MHz) | VDD | 2.4 | 5.5 | V | 系统时钟频率 8/4/1.33MHz | 79 | |
| Operating ambient temperature (工作环境温度) | TA | -40 | 85 | ℃ | 79 | ||
| Standby current (Power Down mode) | Ipd1 | 0.7 | 1 | μA | 79 | ||
| Base Timer operating current | IBTM | 6 | 10 | μA | BTMFS[3:0]=1000 每 4.0 秒产生一个中断 | 79 | |
| WDT current | IWDT | 5 | 7 | μA | WDTCKS[2:0]=000; WDT 溢出时间 500ms | 79 | |
| Touch key operating current (5V) | ITK1 | 1 | 1.2 | mA | 79 | ||
| Input low voltage (VDD 5V) | VIL1 | -0.3 | V | 79 | |||
| Input low voltage, Schmitt trigger (RST/tCK/SCK, 5V) | VIL2 | -0.2 | V | 施密特触发输入: RST/tCK/SCK | 79 | ||
| Standby current (Power Down mode, 3.3V) | Ipd2 | 0.6 | 1 | uA | 80 | ||
| Touch key operating current (3.3V) | ITK2 | 0.9 | 1.1 | mA | 80 | ||
| Input low voltage (VDD 3.3V) | VIL3 | -0.3 | V | 80 | |||
| Input low voltage, Schmitt trigger (RST/tCK/SCK, 3.3V) | VIL4 | -0.2 | V | 施密特触发输入: RST/tCK/SCK | 80 | ||
| Internal reference 2.4V voltage output (5V table) | VDD24 | 2.37 | 2.4 | 2.45 | V | TA=-40~85℃ | 80 |
| Internal reference 2.4V voltage output (3.3V table) | VDD24 | 2.37 | 2.4 | 2.45 | V | TA=-40~85℃ | 80 |
| ADC supply voltage | VAD | 2.4 | 5 | 5.5 | V | 81 | |
| ADC input resistance | RAIN | 1 | M | VIN=5V | 81 | ||
| ADC conversion current (ADC module on, VDD=5V) | IADC1 | 2 | mA | ADC 模块打开, VDD=5V | 81 | ||
| ADC conversion current (ADC module on, VDD=3.3V) | IADC2 | 1.8 | mA | ADC 模块打开, VDD=3.3V | 81 | ||
| Comparator input voltage range | VCM | 0 | V | 81 | |||
| Comparator offset voltage | VOS | 10 | 30 | mV | 81 | ||
| Comparator conversion current | ICMP | 100 | μA | VDD=5V | 81 | ||
| Comparator response time | TCMP | 2 | μs | 81 | |||
| Power-on reset time | TPOR | 5 | 10 | ms | 80 | ||
| Power-down mode wake-up time | TPDW | 1 | 1.5 | ms | 80 | ||
| Reset pulse width | TReset | 18 | μs | 低电平有效 | 80 | ||
| RC oscillator stability (RC 振荡稳定性) | fHRC | 15.84 | 16 | 16.16 | MHz | VDD=3.0 |
80 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PBT | BTM Base timer BTMIF EBTM IPBTM 004BH 10 9 H/W Auto 能 | 30 |
CAD (KiCad official)
- Symbol:
SC92F8542M20U - Footprint:
Package_SO:SOP-20_7.5x12.8mm_P1.27mm - 3D model: SOP-20-300mil, generated on the KiCad land (body 7.45 x 12.7 mm, terminals on the pads, 2.515 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
sc92f8542m20u-etched.step/sc92f8542m20u-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sc92f8542m20u.step/sc92f8542m20u.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SOC(Shenzhen SinOne Microelectronics) datasheet (88 pp, sha256
d69d2caf48cd6911, retrieved 2026-11-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).