main
History Download
Ray Publish 0.1.0 a173623

SC92F84A3M28U

SOC(Shenzhen SinOne Microelectronics) · Microcontroller Units (MCUs/MPUs/SOCs) · SOP-28

SC92F84A3M28U from SOC(Shenzhen SinOne Microelectronics), in a SOP-28. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 VDD power_in Power supply pin; the datasheet specifies an operating voltage of 2.4V to 5.5V, and 2.9V minimum when the system clock is above 12MHz.
2 P1.0/CMOD bidirectional General-purpose I/O P1.0, which is also CMOD, the external capacitor connection for the touch-key circuit.
3 VSS power_in Ground pin (VSS) for the device.
4 P5.1/OSCI bidirectional General-purpose I/O P5.1, which serves as the external crystal oscillator input OSCI when the external high-frequency oscillator is enabled (ENXTL=1), supporting 2 to 16MHz.
5 P5.0/OSCO bidirectional General-purpose I/O P5.0, which serves as the external crystal oscillator output OSCO when the external high-frequency oscillator is enabled (ENXTL=1).
6 P1.1/INT01/TK22/RST bidirectional General-purpose I/O P1.1, also external interrupt INT01, touch channel TK22, and the external reset pin RST when selected by the DISRST code option.
7 P1.2/INT02/T0/RX0/TK21/tCK bidirectional General-purpose I/O P1.2, also INT02, Timer0 external input T0, UART0 receive RX0, touch channel TK21, and the tCK programming/emulation clock when JTAG mode is enabled; avoid TK21 if touch debugging is needed.
8 P1.3/INT03/T1/TX0/TK20/tDIO bidirectional General-purpose I/O P1.3, also INT03, Timer1 external input T1, UART0 transmit TX0, touch channel TK20, and the tDIO programming/emulation data line when JTAG mode is enabled; avoid TK20 if touch debugging is needed.
9 P1.4/INT10/AIN9/TK19 bidirectional General-purpose I/O P1.4, also external interrupt INT10, ADC input AIN9, and touch channel TK19.
10 P1.5/INT11/AIN8/TK18 bidirectional General-purpose I/O P1.5, also external interrupt INT11, ADC input AIN8, and touch channel TK18.
11 P1.6/INT12/AIN7/TK17 bidirectional General-purpose I/O P1.6, also external interrupt INT12, ADC input AIN7, and touch channel TK17.
12 P1.7/INT13/AIN6/TK16 bidirectional General-purpose I/O P1.7, also external interrupt INT13, ADC input AIN6, and touch channel TK16.
13 P2.7/PWM5/AIN5/TK15 bidirectional General-purpose I/O P2.7, also PWM5 output, ADC input AIN5, and touch channel TK15.
14 P2.6/PWM4/AIN4/TK14 bidirectional General-purpose I/O P2.6, also PWM4 output, ADC input AIN4, and touch channel TK14.
15 P2.5/PWM3/AIN3/TK13 bidirectional General-purpose I/O P2.5, also PWM3 output, ADC input AIN3, and touch channel TK13.
16 P2.4/AIN2/TK12 bidirectional General-purpose I/O P2.4, also ADC input AIN2 and touch channel TK12.
17 P2.3/AIN1/TK11 bidirectional General-purpose I/O P2.3, also ADC input AIN1 and touch channel TK11.
18 P2.2/AIN0/TK10 bidirectional General-purpose I/O P2.2, also ADC input AIN0 and touch channel TK10.
19 P2.1/INT25/MISO/RX1/TK9 bidirectional General-purpose I/O P2.1, also external interrupt INT25, SPI MISO, UART1 receive RX1, and touch channel TK9.
20 P2.0/INT24/MOSI/TX1/SDA/TK8 bidirectional General-purpose I/O P2.0, also external interrupt INT24, SPI MOSI, UART1 transmit TX1, TWI SDA, and touch channel TK8.
21 P0.7/INT23/T2/TK7 bidirectional General-purpose I/O P0.7, also external interrupt INT23, Timer2 external counter input T2, and touch channel TK7.
22 P0.6/INT22/T2EX/TK6 bidirectional General-purpose I/O P0.6, also external interrupt INT22, Timer2 external capture/reload input T2EX, and touch channel TK6.
23 P0.5/INT21/SCK/TK5 bidirectional General-purpose I/O P0.5, also external interrupt INT21, SPI/TWI clock SCK, and touch channel TK5.
24 P0.4/INT20/COM4/TK4 bidirectional General-purpose I/O P0.4, also external interrupt INT20, LCD common output COM4, and touch channel TK4.
25 P0.3/COM3/TK3 bidirectional General-purpose I/O P0.3, also LCD common output COM3 and touch channel TK3.
26 P0.2/PWM2/COM2/TK2 bidirectional General-purpose I/O P0.2, also PWM2 output, LCD common output COM2, and touch channel TK2.
27 P0.1/PWM1/COM1/TK1 bidirectional General-purpose I/O P0.1, also PWM1 output, LCD common output COM1, and touch channel TK1.
28 P0.0/PWM0/COM0/TK0 bidirectional General-purpose I/O P0.0, also PWM0 output, LCD common output COM0, and touch channel TK0.

Key specifications

Parameter Value
Manufacturer SOC(Shenzhen SinOne Microelectronics)
Package SOP-28
Category Single Chip Microcomputer/Microcontroller
Pins 28

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
DC supply voltage VDD/VSS -0.3 5.5 V 83
Voltage on any pin (任一管脚输入/输出电压) -0.3 V 83
Operating ambient temperature (工作环境温度) TA -40 85 ℃ 83
Storage temperature (储存温度) TSTG -55 125 ℃ 83
Operating voltage (工作电压) VDD 2.9 5.5 V System clock >12MHz 83
Operating voltage (工作电压) VDD 2.4 5.5 V System clock ≤12MHz 83
Operating ambient temperature (工作环境温度) TA -40 85 ℃ 83
Power-down mode standby current (待机电流) Ipd1 0.7 1 μA VDD=5V, TA=25℃; Power Down 模式 83
Base Timer operating current (Base Timer 工作电流) IBTM 6 7.8 μA VDD=5V, TA=25℃; BTMFS[3:0]=1000, 每 4.0 秒产生一个中断 83
WDT current (WDT 电流) IWDT 4.5 5.4 μA VDD=5V, TA=25℃; WDTCKS[2:0]=000, WDT 溢出时间 500ms 83
Touch key operating current, high sensitivity mode (Touch key 工作电流) ITK1 1.3 1.7 mA VDD=5V, TA=25℃; 高灵敏度模式 83
Touch key operating current, high reliability mode (Touch key 工作电流) ITK2 0.4 0.6 mA VDD=5V, TA=25℃; 高可靠模式 83
Input low voltage (输入低电压) VIL1 -0.3 V VDD=5V, TA=25℃ 83
Input low voltage, Schmitt trigger input RST/tCK/SCK (输入低电压) VIL2 -0.2 V VDD=5V, TA=25℃; 施密特触发输入: RST/tCK/SCK 83
Internal reference 2.4V voltage output (内部基准 2.4V 电压输出) VDD24 2.38 2.4 2.42 V TA=-40~85℃ 83
Power-down mode standby current (待机电流) Ipd2 0.6 0.9 uA VDD=3.3V, TA=25℃; Power Down 模式 84
Touch key operating current, high sensitivity mode (Touch key 工作电流) ITK3 1.2 1.5 mA VDD=3.3V, TA=25℃; 高灵敏度模式 84
Touch key operating current, high reliability mode (Touch key 工作电流) ITK4 0.3 0.4 mA VDD=3.3V, TA=25℃; 高可靠模式 84
Input low voltage (输入低电压) VIL3 -0.3 V VDD=3.3V, TA=25℃ 84
Input low voltage, Schmitt trigger input RST/tCK/SCK (输入低电压) VIL4 -0.2 V VDD=3.3V, TA=25℃; 施密特触发输入: RST/tCK/SCK 84
Power On Reset time (Power On Reset 时间) TPOR 12 18 ms 85
Power Down mode wake-up time (Power Down 模式唤醒时间) TPDW 65 130 μs 85
Reset pulse width (复位脉冲宽度) TReset 18 μs 低电平有效 85
RC oscillator stability (RC 振荡稳定性) fHRC 23.76 24 24.24 MHz VDD=3.05.5V, TA=-2085℃ 85
ADC supply voltage (供电电压) VAD 2.4 5 5.5 V 85
ADC input resistance (ADC 输入电阻) RAIN 10 M VIN=5V 85
ADC conversion current 1 (ADC 转换电流 1) IADC1 0.9 1.1 mA ADC 模块打开, VDD=5V 85
ADC conversion current 2 (ADC 转换电流 2) IADC2 0.7 0.9 mA ADC 模块打开, VDD=3.3V 85

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing PBT BTM Base timer BTMIF EBTM IPBTM 004BH 10 9 H/W Auto 能 31

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: SC92F84A3M28U
  • Footprint: Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm
  • 3D model: SOP-28, generated on the KiCad land (body 7.45 x 17.95 mm, terminals on the pads, 2.515 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: sc92f84a3m28u-etched.step / sc92f84a3m28u-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sc92f84a3m28u.step / sc92f84a3m28u.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SOC(Shenzhen SinOne Microelectronics) datasheet (93 pp, sha256 bfea68f543578234, retrieved 2026-11-13, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF