3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownSC92F84A1M16U
SOC(Shenzhen SinOne Microelectronics) · Microcontroller Units (MCUs/MPUs/SOCs) · SOP-16
SC92F84A1M16U from SOC(Shenzhen SinOne Microelectronics), in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Power supply pin; the datasheet gives an operating range of 2.4V to 5.5V, or 2.9V to 5.5V when the system clock exceeds 12MHz. |
| 2 | P1.0/CMOD | bidirectional | General-purpose I/O P1.0 that doubles as the CMOD pin for the external touch-key capacitor. |
| 3 | VSS | power_in | Ground pin. |
| 4 | P1.1/INT01/TK22/RST | bidirectional | General-purpose I/O P1.1 that can also serve as external interrupt INT01, touch channel TK22, or the external reset pin RST when Code Option DISRST selects reset. |
| 5 | P1.2/INT02/T0/RX0/TK21/tCK | bidirectional | General-purpose I/O P1.2 that also provides external interrupt INT02, Timer0 external input T0, UART0 receive RX0, touch channel TK21, and the tCK programming/emulation clock in JTAG mode; avoid TK21 if touch debugging is needed. |
| 6 | P1.3/INT03/T1/TX0/TK20/tDIO | bidirectional | General-purpose I/O P1.3 that also provides external interrupt INT03, Timer1 external input T1, UART0 transmit TX0, touch channel TK20, and the tDIO programming/emulation data line in JTAG mode; avoid TK20 if touch debugging is needed. |
| 7 | P1.4/INT10/AIN9/TK19 | bidirectional | General-purpose I/O P1.4 that also provides external interrupt INT10, ADC input AIN9, and touch channel TK19. |
| 8 | P1.5/INT11/AIN8/TK18 | bidirectional | General-purpose I/O P1.5 that also provides external interrupt INT11, ADC input AIN8, and touch channel TK18. |
| 9 | P2.6/PWM4/AIN4/TK14 | bidirectional | General-purpose I/O P2.6 that also provides PWM4 output, ADC input AIN4, and touch channel TK14. |
| 10 | P2.5/PWM3/AIN3/TK13 | bidirectional | General-purpose I/O P2.5 that also provides PWM3 output, ADC input AIN3, and touch channel TK13. |
| 11 | P2.4/AIN2/TK12 | bidirectional | General-purpose I/O P2.4 that also provides ADC input AIN2 and touch channel TK12. |
| 12 | P2.1/INT25/MISO/RX1/TK9 | bidirectional | General-purpose I/O P2.1 that also provides external interrupt INT25, SSI SPI MISO, UART1 receive RX1, and touch channel TK9. |
| 13 | P2.0/INT24/MOSI/TX1/SDA/TK8 | bidirectional | General-purpose I/O P2.0 that also provides external interrupt INT24, SPI MOSI, UART1 transmit TX1, TWI SDA, and touch channel TK8. |
| 14 | P0.5/INT21/SCK/TK5 | bidirectional | General-purpose I/O P0.5 that also provides external interrupt INT21, the SPI/TWI clock SCK, and touch channel TK5. |
| 15 | P0.1/PWM1/COM1/TK1 | bidirectional | General-purpose I/O P0.1 shown on the SC92F84A1 pin diagram with PWM1 output, LCD common COM1, and touch channel TK1; the detailed pin-table text is not in the supplied pages. |
| 16 | P0.0/PWM0/COM0/TK0 | bidirectional | General-purpose I/O P0.0 shown on the SC92F84A1 pin diagram with PWM0 output, LCD common COM0, and touch channel TK0; the detailed pin-table text is not in the supplied pages. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SOC(Shenzhen SinOne Microelectronics) |
| Package | SOP-16 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 直流供电电压 | VDD/VSS | -0.3 | 5.5 | V | 83 | ||
| 任一管脚输入/输出电压 | -0.3 | V | 83 | ||||
| 工作环境温度 | TA | -40 | 85 | ℃ | 83 | ||
| 储存温度 | TSTG | -55 | 125 | ℃ | 83 | ||
| 工作电压 | VDD | 2.9 | 5.5 | V | >12MHz | 83 | |
| 工作电压 | VDD | 2.4 | 5.5 | V | ≤12MHz | 83 | |
| 工作环境温度 | TA | -40 | 85 | ℃ | 83 | ||
| 待机电流(Power Down 模式) | Ipd1 | 0.7 | 1 | μA | 83 | ||
| Base Timer 工作电流 | IBTM | 6 | 7.8 | μA | BTMFS[3:0]=1000,每 4.0 秒产生一个中断 | 83 | |
| WDT 电流 | IWDT | 4.5 | 5.4 | μA | WDTCKS[2:0]=000 | 83 | |
| Touch key工作电流(高灵敏度模式) | ITK1 | 1.3 | 1.7 | mA | 83 | ||
| Touch key工作电流(高可靠模式) | ITK2 | 0.4 | 0.6 | mA | 83 | ||
| 输入低电压 | VIL1 | -0.3 | V | 83 | |||
| 输入低电压(施密特触发输入) | VIL2 | -0.2 | V | 施密特触发输入: RST/tCK/SCK | 83 | ||
| 内部基准 2.4V 电压输出 | VDD24 | 2.38 | 2.4 | 2.42 | V | TA=-40~85℃ | 84 |
| 待机电流(Power Down 模式) | Ipd2 | 0.6 | 0.9 | uA | 84 | ||
| Touch key 工作电流(高灵敏度模式) | ITK3 | 1.2 | 1.5 | mA | 84 | ||
| Touch key 工作电流(高可靠模式) | ITK4 | 0.3 | 0.4 | mA | 84 | ||
| 输入低电压 | VIL3 | -0.3 | V | 84 | |||
| 输入低电压(施密特触发输入) | VIL4 | -0.2 | V | 施密特触发输入: RST/tCK/SCK | 84 | ||
| Power On Reset 时间 | TPOR | 12 | 18 | ms | 85 | ||
| Power Down 模式唤醒时间 | TPDW | 65 | 130 | μs | 85 | ||
| 复位脉冲宽度 | TReset | 18 | μs | 低电平有效 | 85 | ||
| RC 振荡稳定性 | fHRC | 23.76 | 24 | 24.24 | MHz | VDD=3.0 |
85 |
| ADC 供电电压 | VAD | 2.4 | 5 | 5.5 | V | 85 | |
| ADC 输入电阻 | RAIN | 10 | M | VIN=5V | 85 | ||
| ADC 转换电流 1 | IADC1 | 0.9 | 1.1 | mA | ADC 模块打开, VDD=5V | 85 | |
| ADC 转换电流 2 | IADC2 | 0.7 | 0.9 | mA | ADC 模块打开, VDD=3.3V | 85 | |
| 微分非线性误差 DNL(±1 LSB 按容差规则换算) | DNL | -1 | 1 | LSB | VDD=5V, VREF=5V | 85 | |
| 积分非线性误差 INL(±1 LSB 按容差规则换算) | INL | -1 | 1 | LSB | 85 | ||
| 偏移量误差 EZ(±4 LSB 按容差规则换算) | EZ | -4 | 4 | LSB | 85 | ||
| 总绝对误差 EAD(±4 LSB 按容差规则换算) | EAD | -4 | 4 | LSB | 85 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PBT | BTM Base timer BTMIF EBTM IPBTM 004BH 10 9 H/W Auto 能 | 31 |
CAD (KiCad official)
- Symbol:
SC92F84A1M16U - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOP-16 (KiCad packages3D, STEP)
- 3D model files:
sc92f84a1m16u-etched.step/sc92f84a1m16u-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sc92f84a1m16u.step/sc92f84a1m16u.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SOC(Shenzhen SinOne Microelectronics) datasheet (93 pp, sha256
bfea68f543578234, retrieved 2026-11-12, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).