3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownSC92F8411M16U
SOC(Shenzhen SinOne Microelectronics) · Microcontrollers (MCU/MPU/SOC) · SOP-16
SC92F8411M16U from SOC(Shenzhen SinOne Microelectronics), in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Power supply pin (VDD). |
| 2 | P1.0/CMOD | bidirectional | P1.0 is a GPIO; CMOD is the touch-key external capacitor connection. |
| 3 | VSS | power_in | Ground pin (VSS). |
| 4 | P1.1/INT01/TK22/RST | bidirectional | P1.1 is a GPIO; it also serves as external interrupt INT01 input 1, touch channel TK22, and the external reset pin RST. |
| 5 | P1.2/INT02/T0/RX0/TK21/tCK | bidirectional | P1.2 is a GPIO; it also serves as INT02 input 2, Timer0 external input T0, UART0 receive RX0, touch channel TK21 (avoid TK21 if touch debug is needed), and the programming/emulation clock tCK. |
| 6 | P1.3/INT03/T1/TX0/TK20/tDIO | bidirectional | P1.3 is a GPIO; it also serves as INT03 input 3, Timer1 external input T1, UART0 transmit TX0, touch channel TK20 (avoid TK20 if touch debug is needed), and the programming/emulation data line tDIO. |
| 7 | P1.4/INT10/AIN9/TK19 | bidirectional | P1.4 is a GPIO; it also serves as external interrupt INT10 input 0, ADC input AIN9, and touch channel TK19. |
| 8 | P1.5/INT11/AIN8/TK18 | bidirectional | P1.5 is a GPIO; it also serves as external interrupt INT11 input 1, ADC input AIN8, and touch channel TK18. |
| 9 | P2.6/PWM4/AIN4/TK14 | bidirectional | P2.6 is a GPIO; it also serves as PWM4 output, ADC input AIN4, and touch channel TK14. |
| 10 | P2.5/PWM3/AIN3/TK13 | bidirectional | P2.5 is a GPIO; it also serves as PWM3 output, ADC input AIN3, and touch channel TK13. |
| 11 | P2.4/AIN2/TK12 | bidirectional | P2.4 is a GPIO; it also serves as ADC input AIN2 and touch channel TK12. |
| 12 | P2.1/INT25/MISO/RX1/TK9 | bidirectional | P2.1 is a GPIO; it also serves as external interrupt INT25 input 5, SPI master-in/slave-out MISO, UART1 receive RX1, and touch channel TK9. |
| 13 | P2.0/INT24/MOSI/TX1/SDA/TK8 | bidirectional | P2.0 is a GPIO; it also serves as external interrupt INT24 input 4, SPI master-out/slave-in MOSI, UART1 transmit TX1, TWI data SDA, and touch channel TK8. |
| 14 | P0.5/INT21/SCK/TK5 | bidirectional | P0.5 is a GPIO; it also serves as external interrupt INT21 input 1, SPI/TWI clock SCK, and touch channel TK5. |
| 15 | P0.1/PWM1/COM1/TK1 | bidirectional | P0.1 is a GPIO; per the pin diagram it also serves as PWM1 output, software LCD common COM1, and touch channel TK1. |
| 16 | P0.0/PWM0/COM0/TK0 | bidirectional | P0.0 is a GPIO; per the pin diagram it also serves as PWM0 output, software LCD common COM0, and touch channel TK0. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SOC(Shenzhen SinOne Microelectronics) |
| Package | SOP-16 |
| Category | Embedded Processors & Controllers |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| DC supply voltage (VDD/VSS) | VDD/VSS | -0.3 | 5.5 | V | 83 | ||
| Voltage on any pin (input/output) | -0.3 | V | 83 | ||||
| Operating ambient temperature (absolute maximum) | TA | -40 | 85 | ℃ | 83 | ||
| Storage temperature | TSTG | -55 | 125 | ℃ | 83 | ||
| Current through VDD | IVDD | 200 | mA | 83 | |||
| Current through VSS | IVSS | 200 | mA | 83 | |||
| Operating voltage 1 (system clock >12MHz) | VDD | 3.7 | 5.5 | V | fSYS >12MHz | 83 | |
| Operating voltage 2 (system clock ≤12MHz) | VDD | 2.4 | 5.5 | V | fSYS ≤12MHz | 83 | |
| Flash ROM IAP operating voltage | VDD(Flash) | 3.7 | 5.5 | V | IAP operation | 83 | |
| EEPROM IAP operating voltage | VDD(EEPROM) | 2.4 | 5.5 | V | IAP operation | 83 | |
| Operating ambient temperature (recommended) | TA | -40 | 85 | ℃ | 83 | ||
| Input low voltage (VIL1, standard IO) | VIL1 | -0.3 | V | 83 | |||
| Input low voltage (VIL2, Schmitt inputs) | VIL2 | -0.2 | V | 83 | |||
| Input low voltage (VIL3, standard IO, 3.3V table) | VIL3 | -0.3 | V | 84 | |||
| Input low voltage (VIL4, Schmitt inputs, 3.3V table) | VIL4 | -0.2 | V | 84 | |||
| Base Timer operating current | IBTM | 1 | 2 | μA | BTMFS[3:0]=1000, one interrupt every 4.0 s | 83 | |
| WDT current | IWDT | 1 | 2 | μA | WDTCKS[2:0]=000, WDT overflow time 500ms | 83 | |
| High-sensitivity touch key operating current (5V) | ITK1 | 0.6 | 1 | mA | 83 | ||
| High-sensitivity touch key operating current (3.3V) | ITK2 | 0.6 | 1 | mA | 84 | ||
| Internal 2.4V reference output (5V table) | VDD24 | 2.38 | 2.4 | 2.42 | V | TA=-40~85℃ | 84 |
| Internal 2.4V reference output (3.3V table) | VDD24 | 2.38 | 2.4 | 2.42 | V | TA=-40~85℃ | 85 |
| Power-on reset time | TPOR | 1 | 1.5 | ms | 85 | ||
| Power-down mode wake-up time | TPDW | 65 | 130 | us | 85 | ||
| Reset pulse width | TReset | 18 | μs | active low | 85 | ||
| RC oscillator frequency (fHRC) | fHRC | 23.76 | 24 | 24.24 | MHz | VDD = 2.4V |
85 |
| ADC supply voltage 1 (Vref=2.4V) | VAD1 | 2.7 | 5 | 5.5 | V | Vref=2.4V | 85 |
| ADC supply voltage 2 (Vref=VDD) | VAD2 | 2.4 | 5 | 5.5 | V | Vref=VDD | 85 |
| ADC conversion current 1 | IADC1 | 2.7 | 3.2 | mA | ADC module on; VDD=5V | 85 | |
| ADC conversion current 2 | IADC2 | 2.1 | 2.5 | mA | ADC module on; VDD=3.3V | 85 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PBT | BTM Base timer BTMIF EBTM IPBTM 004BH 10 9 H/W Auto 能 | 31 |
CAD (KiCad official)
- Symbol:
SC92F8411M16U - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOP-16 (KiCad packages3D, STEP)
- 3D model files:
sc92f8411m16u-etched.step/sc92f8411m16u-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sc92f8411m16u.step/sc92f8411m16u.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SOC(Shenzhen SinOne Microelectronics) datasheet (95 pp, sha256
62e8fb54489b3edf, retrieved 2026-11-05, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).