Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SC92F8371M16U

SOC(Shenzhen SinOne Microelectronics) · Microcontroller Units (MCUs/MPUs/SOCs) · SOP-16

SC92F8371M16U from SOC(Shenzhen SinOne Microelectronics), in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Power supply pin; operating voltage is 2.4V to 5.5V.
2 P1.0/CMOD bidirectional General-purpose I/O P1.0; also the touch key external capacitor pin CMOD.
3 VSS power_in Ground pin.
4 P1.1/INT01/SCK/RST bidirectional General-purpose I/O P1.1; also external interrupt 0 input 1, SPI/TWI clock SCK, and reset pin RST (selected by the DISRST Customer Option).
5 P1.2/INT02/MISO/RX/T0/TK15/tCK bidirectional General-purpose I/O P1.2; also external interrupt 2 input, SPI MISO, UART RX, Timer0 external input, touch channel 15 (avoid if TK debug is used), and programming/emulation clock tCK.
6 P1.3/INT03/MOSI/SDA/TX/T1/TK14/tDIO bidirectional General-purpose I/O P1.3; also external interrupt 3 input, SPI MOSI, TWI SDA, UART TX, Timer1 external input, touch channel 14 (avoid if TK debug is used), and programming/emulation data tDIO.
7 P1.4/TK13 bidirectional General-purpose I/O P1.4; also touch key channel 13.
8 P1.5/TK12 bidirectional General-purpose I/O P1.5; also touch key channel 12.
9 P2.6/TK10 bidirectional General-purpose I/O P2.6; also touch key channel 10.
10 P2.5/TK9 bidirectional General-purpose I/O P2.5; also touch key channel 9.
11 P2.4/TK8 bidirectional General-purpose I/O P2.4; also touch key channel 8.
12 P2.1/INT25/TK7 bidirectional General-purpose I/O P2.1; also external interrupt 2 input 5 and touch key channel 7.
13 P2.0/INT24/TK6 bidirectional General-purpose I/O P2.0; also external interrupt 2 input 4 and touch key channel 6.
14 P0.5/INT21/TK5 bidirectional General-purpose I/O P0.5; also external interrupt 2 input 1 and touch key channel 5.
15 P0.1/PWM1/TK1 bidirectional General-purpose I/O P0.1; also PWM1 output and touch key channel 1.
16 P0.0/PWM0/TK0 bidirectional General-purpose I/O P0.0; also PWM0 output and touch key channel 0.

Key specifications

Parameter Value
Manufacturer SOC(Shenzhen SinOne Microelectronics)
Package SOP-16
Category Embedded Processors & Controllers
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
DC供电电压 VDD/VSS -0.3 5.5 V 63
工作环境温度 TA -40 85 ℃ 63
储存温度 TSTG -55 125 ℃ 63
工作电压 VDD 2.4 5.5 V 63
工作环境温度 TA -40 85 ℃ 63
待机电流(Power Down模式) Ipd1 0.7 1 μA 63
Base Timer工作电流 IBTM 5.6 7 μA BTMFS[3:0]=1000 每 4.0 秒产生一个中断 63
WDT电流 IWDT 4.3 5.1 μA WDTCKS[2:0]=000 WDT 溢出时间 500ms 63
Touch key工作电流(高灵敏度模式) ITK1 1.4 1.7 mA 63
Touch key工作电流(高可靠模式) ITK2 0.3 1 mA 63
输入低电压 VIL1 -0.3 V max 0.3VDD 63
待机电流(Power Down模式,3.3V) Ipd2 0.6 1 uA 64
Touch key 工作电流(高灵敏度模式,3.3V) ITK3 1.2 1.5 mA 64
Touch key 工作电流(高可靠模式,3.3V) ITK4 0.3 1 mA 64
输入低电压(3.3V) VIL3 -0.3 V max 0.3VDD 64
Power On Reset时间 TPOR 1 1.5 ms 64
Power Down模式唤醒时间 TPDW 1 1.5 ms 64
复位脉冲宽度 TReset 18 μs 低电平有效 64
RC振荡稳定性(fHRC) fHRC 23.76 24 24.24 MHz VDD=2.95.5V TA=-2085 ℃ 64

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing PBT BTM Base timer BTMIF EBTM IPBTM 004BH 7 9 H/W Auto 能 26

CAD (KiCad official)

  • Symbol: SC92F8371M16U
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOP-16 (KiCad packages3D, STEP)
  • 3D model files: sc92f8371m16u-etched.step / sc92f8371m16u-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sc92f8371m16u.step / sc92f8371m16u.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SOC(Shenzhen SinOne Microelectronics) datasheet (72 pp, sha256 0b90324fb0830276, retrieved 2026-10-27, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF