Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SC92F73A2M20U

SOC(Shenzhen SinOne Microelectronics) · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-20-300mil

SC92F73A2M20U from SOC(Shenzhen SinOne Microelectronics), in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Power supply pin; the datasheet gives an operating voltage of 2.4V to 5.5V, or 2.9V to 5.5V when the system clock exceeds 12MHz.
2 P1.0 bidirectional P1.0 is a general-purpose bidirectional I/O pin whose pull-up resistor can be set independently.
3 VSS power_in Ground reference pin for the device.
4 P1.1/INT01/RST bidirectional P1.1 is a GPIO that can also serve as external interrupt INT01 input or, when Code Option DISRST selects it, the external RST reset pin.
5 P1.2/INT02/T0/RX0/tCK bidirectional P1.2 is a GPIO that can also serve as external interrupt INT02, Timer0 external counter input T0, UART0 receive RX0, or the tCK JTAG clock line when JTAG mode is enabled.
6 P1.3/INT03/T1/TX0/tDIO bidirectional P1.3 is a GPIO that can also serve as external interrupt INT03, Timer1 external counter input T1, UART0 transmit TX0, or the tDIO JTAG data line when JTAG mode is enabled.
7 P1.4/INT10/AIN9 bidirectional P1.4 is a GPIO that can also serve as external interrupt INT10 input or ADC input channel AIN9.
8 P1.5/INT11/AIN8 bidirectional P1.5 is a GPIO that can also serve as external interrupt INT11 input or ADC input channel AIN8.
9 P2.7/PWM5/AIN5 bidirectional P2.7 is a GPIO that can also serve as PWM5 output or ADC input channel AIN5.
10 P2.6/PWM4/AIN4 bidirectional P2.6 is a GPIO that can also serve as PWM4 output or ADC input channel AIN4.
11 P2.5/PWM3/AIN3 bidirectional P2.5 is a GPIO that can also serve as PWM3 output or ADC input channel AIN3.
12 P2.4/AIN2 bidirectional P2.4 is a GPIO that can also serve as ADC input channel AIN2.
13 P2.1/INT25/MISO/RX1 bidirectional P2.1 is a GPIO that can also serve as external interrupt INT25, SPI master-in/slave-out MISO, or UART1 receive RX1.
14 P2.0/INT24/MOSI/TX1/SDA bidirectional P2.0 is a GPIO that can also serve as external interrupt INT24, SPI MOSI, UART1 transmit TX1, or TWI data SDA.
15 P0.5/INT21/SCK bidirectional P0.5 is a GPIO that can also serve as external interrupt INT21 input or the SPI/TWI clock SCK.
16 P0.4/INT20/COM4 bidirectional P0.4 is a GPIO that can also serve as external interrupt INT20 input or LCD drive common output COM4.
17 P0.3/COM3 bidirectional P0.3 is a GPIO that can also serve as LCD drive common output COM3.
18 P0.2/PWM2/COM2 bidirectional P0.2 is a GPIO that can also serve as PWM2 output or LCD drive common output COM2.
19 P0.1/PWM1/COM1 bidirectional P0.1 is a GPIO that can also serve as PWM1 output or LCD drive common output COM1.
20 P0.0/PWM0/COM0 bidirectional P0.0 is a GPIO that can also serve as PWM0 output or LCD drive common output COM0.

Key specifications

Parameter Value
Manufacturer SOC(Shenzhen SinOne Microelectronics)
Package SOIC-20-300mil
Category Single Chip Microcomputer/Microcontroller
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
直流供电电压 DC supply voltage VDD/VSS -0.3 5.5 V 81
任一管脚输入/输出电压 Voltage on any pin -0.3 V 81
工作环境温度 Operating ambient temperature TA -40 85 ℃ 81
储存温度 Storage temperature TSTG -55 125 ℃ 81
工作电压 Operating voltage VDD 2.9 5.5 V System clock >12MHz 81
工作电压 Operating voltage VDD 2.4 5.5 V System clock ≤12MHz 81
工作环境温度 Operating ambient temperature TA -40 85 ℃ - 81
待机电流 Standby current (Power Down mode) Ipd1 0.7 1 μA Power Down 模式 81
Base Timer 工作电流 Base Timer operating current IBTM 6 7.8 μA BTMFS[3:0]=1000; 每 4.0 秒产生一个中断 81
WDT 电流 WDT current IWDT 4.5 5.4 μA WDTCKS[2:0]=000; WDT 溢出时间 500ms 81
内部基准 2.4V 电压输出 Internal reference 2.4V output voltage VDD24 2.38 2.4 2.42 V TA=-40~85℃ 81
待机电流 Standby current (Power Down mode), VDD=3.3V Ipd2 0.6 0.9 uA Power Down 模式 82
供电电压 ADC supply voltage VAD 2.4 5 5.5 V 83
ADC 输入电阻 ADC input resistance RAIN 1 M VIN=5V 83
ADC 转换电流 1 ADC conversion current 1 IADC1 0.9 3.2 mA ADC 模块打开 VDD=5V 83
ADC 转换电流 2 ADC conversion current 2 IADC2 0.7 2.5 mA ADC 模块打开 VDD=3.3V 83
Power On Reset 时间 Power On Reset time TPOR 12 18 ms 82
Power Down 模式唤醒时间 Power Down wake-up time TPDW 65 130 μs 82
复位脉冲宽度 Reset pulse width TReset 18 μs 低电平有效 Active low 83
RC 振荡稳定性 RC oscillator stability fHRC 15.84 16 16.16 MHz VDD=2.95.5V TA=-1085 ℃ 83

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing PBT BTM Base timer BTMIF EBTM IPBTM 004BH 10 9 H/W Auto 能 30

CAD (KiCad official)

  • Symbol: SC92F73A2M20U
  • Footprint: Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm
  • 3D model: SOIC-20-300mil (KiCad packages3D, STEP)
  • 3D model files: sc92f73a2m20u-etched.step / sc92f73a2m20u-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sc92f73a2m20u.step / sc92f73a2m20u.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SOC(Shenzhen SinOne Microelectronics) datasheet (90 pp, sha256 722852121fb2c5ce, retrieved 2026-10-28, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF